Preparations and properties of thermosensitive terpolymers of N‐isopropylacrylamide,sodium 2‐acrylamido‐2‐methyl‐propanesuphonate,and N‐tert‐butylacrylamide

Terpolymers based on N‐isopropylacrylamide, sodium 2‐acrylamido‐2‐methyl‐propanesulfonate, and N‐tert‐butylacrylamide were synthesized by free‐radical copolymerization with 2,2′‐azobisisobutyronitrile as an initiator. The lower critical solution temperatures (LCSTs) of the linear polymer aqueous solutions were determined by the measurement of the transmittance on UV at different temperatures. The influence of the polymer concentration, polymer composition, and ionic strength on the LCSTs of the linear polymers was investigated. The LCST decreased with increases in the hydrophobic monomer N‐tert‐butylacrylamide, polymer concentration, and ionic strength. The phase transition became sharp when the polymer concentration and ionic strength increased. Meanwhile, the crosslinked hydrogels were prepared with the same recipe used for the linear terpolymers, but a crosslinker was added to the reaction system. The swelling ratios of the hydrogels at various temperatures and salt solutions were determined. The hydrogels possessed both high swelling ratios and thermosensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

HS－900有机硅密封抗渗防水剂性能的研究

ＨＳ－９００有机硅密封抗渗防水剂是一种新型的有机硅改性硅酸盐防水材料。具有良好的抗渗性能和耐酸碱腐蚀能力。将其涂于低标号混凝土材料上，效果尤其明显。     

The adsorption of dyes from aqueous solution using diatomite

Raw diatomite was calcined at 450 °C for dyes removal from aqueous solution. SEM and FTIR analysis show that the raw diatomite contains organic impurities, which are removed after the calcination. The impurities removal decreases the specific surface area and increases the average pore diameter of raw diatomite, while improves its adsorption capability of dyes. The adsorption isotherm and kinetics experiments of methylene blue onto calcined diatomite were then carried out to investigate the adsorption property. It shows that the adsorption capacity of methylene blue is about 50 mg/g. The adsorption isotherm was fitted by the Langmuir, Freundlich and Redlich-Peterson models, which reveals that the Redlich-Peterson isotherm is the best one. Two kinetic models, pseudo-first order and pseudo-second order, were rearranged for expediently investigating the adsortpion mechanisms. Fitting results show that the pseudo-first-order model is better in describing the adsorption process.     

邻氟苯甲腈的合成研究

以邻甲苯胺为原料 ,采用四步反应法合成邻氟苯甲腈。 (1)邻甲苯胺经西曼反应合成邻氟甲苯 ,收率 6 5 % ;(2 )邻氟甲苯经氯化、水解得到邻氟苯甲醛 ,以过氧化苯甲酰为氯化引发剂 ,氧化锌为水解催化剂 ,收率 80 % ;(3)邻氟苯甲醛经肟化反应得到邻氟苯甲醛肟 ,收率 87% ;(4)肟用乙酸酐脱水合成出邻氟苯甲腈 ,收率 76 % ,产品质量分数大于 99%。     

GOR-C降烯烃催化剂的工业应用

大庆炼化公司林源生产指挥部催化裂化装置原料油为典型石蜡基原油的常压渣油，生产的催化汽油中的烯烃含量较高，为此试用长岭炼化公司催化剂厂生产的降烯烃催化剂GOR-C。结果表明，降烯烃效果明显，产品分布无明显变化，能满足现有生产要求，经济效益显著。     

紫外光固化胶粘剂的粘接性能研究

本研究采用三种丙烯酸酯单体(M01、M02、M03)和一种紫外光引发剂(I01)配制了紫外光固化胶粘剂,探讨了不同原料配比对产品拉伸剪切强度的影响。实验结果表明:当原料配比为M01:2.07mmol、M02:7.02mmol、M03:13.7mmol、I01:0.585mmol时产品的拉伸剪切强度较好。     

聚酯微观结构模型

不同的加工工艺赋予聚酯纤维特殊的微观结构，为正确认识其微观结构以利于工艺的选择及性能的优化，综述了聚酯纤维微观结构的研究，并作了较详细的分析。     

Coordinating efficiency and equity in disaster relief logistics via information updates

This paper addresses a multi-supplier, multi-affected area, multi-relief, and multi-vehicle relief allocation problem in disaster relief logistics. A multi-objective optimisation model based on disaster scenario information updates is proposed in an attempt to coordinate efficiency and equity through timely and appropriate decisions regarding issues such as vehicle routing and relief allocation. An optimal stopping rule is also proposed to determine the optimum period of delay before responding to disaster, because decision making requires accurate disaster information. The main contribution of this paper is solving relief allocation problem in a novel way by correlating operational research with statistical decision making and Bayesian sequential analysis. Finally, a case is presented based on the post-disaster rescue in Eastern China after supertyphoon Saomai to test the applicability and show the potential advantages of the proposed model.     

单晶金刚石膜与多晶金刚石膜的制备工艺及性能

本文主要介绍了用微波等离子体化学气相沉积法(以下简称MP CVD法)以甲醇-氢气混合气和丙酮-氢气混合气为源气体,分别以单晶硅的(111)面和人造金刚石的(100)面为衬底材料,制备出了面积为20mm×20mm厚为10μm的多晶金刚石膜和面积为1.0mm×1.0mm厚为5μm的单晶金刚石膜。通过试验发现,源气体配比和衬底温度对薄膜质量起决定性作用。另外,衬底在反应腔中的位置对薄膜的生成也有很大影响。单晶金刚石膜制备过程中衬底金刚石的晶体取向与金刚石薄膜的生长及质量有密切的关系。在金刚石的(100),(110)和(111)面上分别获得了单晶金刚石膜和金刚石多晶粒子。选用扫描电镜、显微激光拉曼、反射电子衍射对多晶金刚石膜及单晶金刚石膜的性能进行了测试。     

高温浓硫酸液下泵的故障分析及处理

安徽铜都铜业股份有限公司金昌冶炼厂新建 300 kt／a铜冶炼烟气制酸装置干燥塔入口烟气温度(30±2)℃,烟气ψ(SO_2)9％±1％。干燥塔循环槽采用2台单级单吸离心立式悬臂液下泵,型号为LSB780-30B,一开一备。吸收塔循环槽液下泵型号也为LSB780-30B,为2台泵并联。