The validity and reliability of the Dutch Effort–Reward Imbalance Questionnaire.

The reliability and validity of the Effort–Reward Imbalance Questionnaire were tested in 775 blue- and white-collar workers in the Netherlands. Cronbach's alpha revealed sufficient internal consistency of all subscales except Need for Control. With exploratory probabilistic scaling (Mokken) analysis, the psychometric qualities of the Need for Control scale were improved. With confirmatory factor analysis, the factorial validity of the Extrinsic Effort and Reward subscales was confirmed. A model with 3 separate dimensions for reward (status control, esteem reward, and monetary gratification) proved adequate, emphasizing the importance of distinguishing subscales. The congruent validity of the subscales and a hypothesized relationship with an external construct, health functioning, were confirmed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Economic feasibility of bifacial silicon solar cells

Bifacial solar cells and modules are a promising approach to increase the energy output of photovoltaic systems, and therefore decrease levelized cost of electricity (LCOE). This work discusses the bifacial silicon solar cell concepts PERT (passivated emitter, rear totally diffused) and BOSCO (both sides collecting and contacted) in terms of expected module cost and LCOE based on in‐depth numerical device simulation and advanced cost modelling. As references, Al‐BSF (aluminium back‐surface field) and PERC (passivated emitter and rear) cells with local rear‐side contacts are considered. In order to exploit their bifacial potential, PERT structures (representing cells with single‐sided emitter) are shown to require bulk diffusion lengths of more than three times the cell thickness. For the BOSCO concept (representing cells with double‐sided emitter), diffusion lengths of half the cell thickness are sufficient to leverage its bifacial potential. In terms of nominal LCOE, BOSCO cells are shown to be cost‐competitive under monofacial operation compared with an 18% efficient (≙ p_MPP = 18 mW/cm²) multicrystalline silicon (mc‐Si) Al‐BSF cell and a 19% mc‐Si PERC cell for maximum output power densities of p_MPP ≥ 17.3 mW/cm² and p_MPP ≥ 18.1 mW/cm², respectively. These values assume the use of $10/kg silicon feedstock for the BOSCO and $20/kg for the Al‐BSF and PERC cells. For the PERT cell, corresponding values are p_MPP ≥ 21.7 mW/cm² and p_MPP ≥ 22.7 mW/cm², respectively, assuming the current price offset (≈50%, at the time of October 2014) of n‐type Czochralski‐grown silicon (Cz‐Si) compared with mc‐Si wafers. The material price offset of n‐type to p‐type Cz‐Si wafers (≈15%, October 2014) currently accounts for approximately 1 mW/cm², which correlates to a conversion efficiency difference of 1%_abs for monofacial illumination with 1 sun. From p‐type mc‐Si to p‐type Cz‐Si (≈30% wafer price offset, October 2014), this offset is approximately 2.5 mW/cm² for a PERT cell. When utilizing bifacial operation, these required maximum output power densities can be transformed into required minimum rear‐side illumination intensities for arbitrary front‐side efficiencies η_front by means of the performed numerical simulations. For a BOSCO cell with η_front = 18%, minimum rear‐side illumination intensities of ≤ 0.02 suns are required to match a 19% PERC cell in terms of nominal LCOE. For an n‐type Cz‐Si PERT cell with η_front = 21%, corresponding values are ≤ 0.11 suns with 0.05 suns being the n‐type to p‐type material price offset. This work strongly motivates the use of bifacial concepts to generate lowest LCOE. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthese von aliphatischen Aldehyden aus Alkanen und Kohlendioxid: Valeraldehyd aus Butan und CO2 – Machbarkeit und Grenzen

During the last decades, the engineering of chemical processes has focused more and more on energy efficiency and reduction of climate‐changing emissions. Regarding the synthesis of aldehydes, the photocatalytic dehydrogenation of alkanes to olefins, using visible (sun) light, and the subsequent hydroformylation of such olefins with CO₂ seem to be capable to achieve both targets. This work deals mainly with catalyst concepts for both reaction steps. Here, kinetic studies of the photocatalytic alkane dehydrogenation are presented, and the feasibility of hydroformylation using CO₂ is described in a continuous gas phase reaction. The problems that have to be solved befoe the technical application are discussed and an economic and ecological evaluation for both processes is carried out.     

Characterization of microfabricated probes for combined atomic force and high-resolution scanning electrochemical microscopy

A combined atomic force and scanning electrochemical microscope probe is presented. The probe is electrically insulated except at the very apex of the tip, which has a radius of curvature in the range of 10-15 nm. Steady-state cyclic voltammetry measurements for the reduction of Ru(NH3)6Cl3 and feedback experiments showed a distinct and reproducible response of the electrode. These experimental results agreed with finite element simulations for the corresponding diffusion process. Sequentially topographical and electrochemical studies of Pt lines deposited onto Si3N4 and spaced 100 nm apart (edge to edge) showed a lateral electrochemical resolution of 10 nm.     

Nanophase-separated amphiphilic conetworks as versatile matrixes for optical chemical and biochemical sensors

As a novel class of sensor matrixes, nanophase-separated amphiphilic polymeric conetworks (APCNs) open a new dimension for optical chemical and biochemical sensing. These conetworks consist of a hydrophilic phase-we used poly(2-hydroxyethyl acrylate), poly(2-(dimethylamino)ethyl acrylate), or polycationic poly(2-(trimethylammonium)ethyl acrylate)-and of a hydrophobic phase-poly(dimethylsiloxane). Sensors can be prepared by simple impregnation of the matrix. Due to nanophase separation, there is a spatial separation between areas in which the indicator reagents are well immobilized and areas that advantageously take care of the diffusive transport of the analyte, whereby these functionalities of the contrary phases can be exchanged. Thanks to the huge interface between the contrary phases, the accessibility of the indicator reagents is good, which makes it possible to design sensors with high sensitivity. To demonstrate the advantages of APCNs as matrixes, different prototypes of sensors were prepared, e.g., one to determine gaseous chlorine based on its reaction with immobilized o-tolidine and another to determine vaporous acids based on immobilized bromophenol blue dianions. As a breakthrough in biochemical sensing, we are also able to present an easily producible, optically transparent biochemical sensor to determine peroxides in nonpolar organic media-based on coimmobilized horseradish peroxidase and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate).     

Biological removal of 17α-ethinylestradiol by a nitrifier enrichment culture in a membrane bioreactor

Increasing concern about the fate of 17α-ethinylestradiol (EE2) in the environment stimulates the search for alternative methods for wastewater treatment plant (WWTP) effluent polishing. The aim of this study was to establish an innovative and effective biological removal technique for EE2 by means of a nitrifier enrichment culture (NEC) applied in a membrane bioreactor (MBR). In batch incubation tests, the microbial consortium was able to remove EE2 from both a synthetic minimal medium and WWTP effluent. A maximum EE2 removal rate of 9.0 μg EE2 g⁻¹ biomass-VSS h⁻¹ was achieved (>94% removal efficiency). Incubation of the heterotrophic bacteria isolated from the NEC did not result in a significant EE2 removal, indicating the importance of nitrification as driving force in the mechanism. Application of the NEC in a MBR to treat a synthetic influent with an EE2 concentration of 83 ng EE2 L⁻¹ resulted in a removal efficiency of 99% (loading rates up to 208 ng EE2 L⁻¹ d⁻¹; membrane flux rate: 6.9 L m⁻² h⁻¹). Simultaneously, complete nitrification was achieved at an optimal ammonium influent concentration of 1.0 mg NH₄⁺-N L⁻¹. This minimal NH₄⁺-N input is very advantageous for effluent polishing since the concomitant effluent nitrate concentrations will be low as well and it offers opportunities for the nitrifying MBR as a promising add-on technology for WWTP effluent polishing.     

Deutsche Nationalbibliothek 4. Erweiterungsbau in Leipzig – Besonderheiten bei der Unterfangung und der Bestandssicherung

Derzeit entsteht der 4. Erweiterungsbau der Deutschen Nationalbibliothek in Leipzig. Der neue Baukörper grenzt bereichsweise an die Bestandsgebäude und wurde 6 bis 8 m unterhalb der bestehenden Fundamente gegründet. Der setzungsempfindliche Baugrund infolge eines 4 m mächtigen Kohleflözes musste in der Planung besonders berücksichtigt werden. Um die Bestandsgebäude gegen Setzungen, Rissbildungen und Schiefstellungen zu schützen, wurden außergewöhnliche Sicherungsmaßnahmen realisiert: –·Zusammenspannen der Gebäude mittels Anordnung von Zugstäben –·Auskreuzung gefährdeter Bereiche durch Holz‐Fachwerkverbände –·Anwendung einer besonderen Technologie der HDI‐Unterfangung. Mit diesen Maßnahmen konnten ungleichmäßige Setzungen und Rissbildungen weitestgehend vermieden werden. The German National Library in Leipzig – 4^th extension – Special features of the underpinning and safety measures of inventory. At present the 4^th extension of the German National Library in Leipzig is under construction. The new building is near the existing buildings and was founded in 6 to 8 m below the existing foundations. The ground is liable to subsidence due to a 4 m thick coal seam. This had to be specially considered in the planning. To protect the existing buildings against settlements, cracking and misalignment extraordinary safety measures were implemented: –·tensioning arrangement of buildings by means of tension bars –·strengthening of vulnerable areas by timber trussed bond –·using a special technology of grouted underpinning With these measures, non‐uniform settlements and cracks could be largely avoided.     

Hybridizing Place: Global and Local Identity in Puerto Madero,Buenos Aires

The large-scale global flows of capital, culture, products, and labour have shifted the identity of place and have elevated the visibility of some cities far beyond their regional or national level. As cities vie for global presence, they must inevitably address the reality of local presence. In much of the discourse surrounding globalization and place, local and global influences are described as opposing concepts whose confrontation leads to the destruction of particularization. Through a case study of the revitalized industrial area of Puerto Madero in Buenos Aires, Argentina, this paper documents an example of a hybridized local and global identity. The developers and designers of Puerto Madero, a mix of public and private entities, created this hybridized identity through the actual physical development as well as the process and narratives associated with this development.