Ultrasound-induced gas release from contrast agent microbubbles

We investigated gas release from two hardshelled ultrasound contrast agents by subjecting them to high-mechanical index (MI) ultrasound and simultaneously capturing high-speed photographs. At an insonifying frequency of 1.7 MHz, a larger percentage of contrast bubbles is seen to crack than at 0.5 MHz. Most of the released gas bubbles have equilibrium diameters between 1.25 and 1.75 microm. Their disappearance was observed optically. Free gas bubbles have equilibrium diameters smaller than the bubbles from which they have been released. Coalescence may account for the long dissolution times acoustically observed and published in previous studies. After sonic cracking, the cracked bubbles stay acoustically active.     

Protein flexibility and ligand rigidity: a thermodynamic and kinetic study of ITAM-based ligand binding to Syk tandem SH2

The Syk tandem Src homology 2 domain (Syk tSH2) constitutes a flexible protein module involved in the regulation of Syk kinase activity. The Syk tSH2 domain is assumed to function by adapting the distance between its two SH2 domains upon bivalent binding to diphosphotyrosine ligands. A thermodynamic and kinetic analysis of ligand binding was performed by using surface plasmon resonance (SPR). Furthermore, the effect of binding on the Syk tSH2 structural dynamics was probed by hydrogen/deuterium exchange and electrospray mass spectrometry (ESI-MS). Two ligands were studied: 1, a flexible peptide derived from the tSH2 recognition ITAM sequence at the gamma chain of the FcepsilonRI-receptor, and 2, a ligand in which the amino acids between the two SH2 binding motifs in ligand 1 have been replaced by a rigid linker of comparable length. Both ligands display comparable affinity for Syk tSH2 at 25 degrees C, yet a major difference in thermodynamics is observed. Upon binding of the rigid ligand, 2, the expected entropy advantage is not realized. On the contrary, 2 binds with a considerably higher entropy price of approximately 9 kcal mol-1, which is attributed to a further decrease in protein flexibility upon binding to this rigid ligand. The significant reduction in deuterium incorporation in the Syk tSH2 protein upon binding of either 1 or 2, as monitored by ESI-MS, indicates a major reduction in protein dynamics upon binding. The results are consistent with a two-step binding model: after an initial binding step, a rapid structural change of the protein occurs, followed by a second binding step. Such a bivalent binding model allows high affinity and fast dissociation kinetics, which are very important in transient signal-transduction processes.     

Multifrequency transducer for microemboli classification and sizing

The classification of circulating microemboli as gaseous or particulate matter is essential to establish the relevance of the detected embolic signals. Until now, Doppler techniques have failed to determine unambiguously the nature of circulating microemboli. Recently, a new approach based on the analysis of radio frequency (RF) signal and using the nonlinear characteristics of gaseous bubbles to classify emboli was investigated. The main limitation of these studies was the requirement of two separate transducers for transmission and reception. This paper presents a multi-frequency transducer with two independent transmitting elements and a separate receiving part with a wide frequency band. The transmitting elements are positioned in a concentric design and cover a frequency band between 100 and 600 kHz. The receiving part consists of a polyvinylidene fluoride layer. The new transducer has been tested in vitro using gaseous emboli. It could correctly classify and size air emboli with diameters ranging from 10 microm to 105 microm.     

Noise equalization for detection of microcalcification clusters in direct digital mammogram images

Equalizing image noise is shown to be an important step in the automatic detection of microcalcifications in digital mammography. This study extends a well established film-screen noise equalization scheme developed by Veldkamp et al. for application to full-field digital mammogram (FFDM) images. A simple noise model is determined based on the assumption that quantum noise is dominant in direct digital X-ray imaging. Estimation of the noise as a function of the gray level is improved by calculating the noise statistics using a truncated distribution method. Experimental support for the quantum noise assumption is presented for a set of step wedge phantom images. Performance of the noise equalization technique is also tested as a preprocessing stage to a microcalcification detection scheme. It is shown that the square root model based approach which FFDM allows leads to a robust estimation of the high frequency image noise. This provides better microcalcification detection performance when compared to the film-screen noise equalization method developed by Veldkamp. Substantially better results are obtained than when noise equalization is omitted. A database of 124 direct digital mammogram images containing 28 microcalcification clusters was used for evaluation of the method.     

Surface heat transfer coefficients to stationary spherical particles in an experimental unit for hydrofluidisation freezing of individual foods

Convection heat transfer to spherical particles inside a hydrofluidisation freezing unit was investigated. The unit contained a food tank with a perforated bottom plate to create agitating jets. An aqueous solution of 30% ethanol+20% glucose was used as the refrigeration medium in a temperature range of −20 to 0 °C and flow rates from 5 to 15 l min⁻¹. The lumped capacitance method was applied on cooling profiles of aluminium spheres of 5–50 mm to obtain surface heat transfer coefficients. Coefficients were within a range of 154–1548 W m⁻² °C⁻¹, and depended on diameter, flow rate, refrigeration temperature and fluid agitation level. The agitation due to jets was accounted for by means of an agitation Reynolds number in a Nusselt correlation A large variability of measured surface heat transfer coefficients was observed. This could be attributed to non-constant flow and turbulence fields in the refrigeration medium. The value of the heat transfer coefficient was compared to values determined on strawberries.     

Methylotrophic yeasts as factories for the production of foreign proteins

In this contribution we discuss the potential of methylotrophic yeasts as hosts for the high level production of valuable foreign proteins. Recent relevant achievements on the intracellular production or secretion of proteins are summarized. Special attention is paid to a specific advantage of the use of methylotrophic yeasts, namely the possibility of accumulating the foreign gene products inside peroxisomes. This approach may be of major advantage when the protein product is toxic for the host cell and, also, to protect these proteins these proteins from undesired side-effects such as proteolysis or aggregation.     

Detection of Fiber Direction in Composites by Means of a High-Frequency Wide-Bounded Ultrasonic Beam and Schlieren Photography

ABSTRACT

This work describes an experimental method, based on the combination of schlieren photography and a 2.5-cm-wide-bounded ultrasonic beam of 10 MHz, used to detect the fiber direction in composites. Experiments are described on unidirectional and fabric fiber-reinforced composites. The method exploits the spatially dependent reflection coefficient because of discontinuities in the fiber density. The typical discontinuities that reflect the fiber direction are detectable if 10-MHz ultrasound is applied. Lower frequencies are not susceptible to these typical discontinuities, whereas larger frequencies would make the use of schlieren photography more difficult.     

Temporal change analysis for characterization of mass lesions in mammography

In this paper, we present a fully automated computer-aided diagnosis (CAD) program to detect temporal changes in mammographic masses between two consecutive screening rounds. The goal of this work was to improve the characterization of mass lesions by adding information about the tumor behavior over time. Towards this goal we previously developed a regional registration technique that finds for each mass lesion on the current view a location on the prior view where the mass was most likely to develop. For the task of interval change analysis, we designed two kinds of temporal features: difference features and similarity features. Difference features indicate the (relative) change in feature values determined on prior and current views. These features may be especially useful for lesions that are visible on both views. Similarity features measure whether two regions are comparable in appearance and may be useful for lesions that are visible on the prior view as well as for newly developing lesions. We evaluated the classification performance with and without the use of temporal features on a dataset consisting of 465 temporal mammogram pairs, 238 benign, and 227 malignant. We used cross validation to partition the dataset into a training set and a test set. The training set was used to train a support vector machine classifier and the test set to evaluate the classifier. The average A(z) value (area under the receiver operating characteristic curve) for classifying each lesion was 0.74 without temporal features and 0.77 with the use of temporal features. The improvement obtained by adding temporal features was statistically significant (P = 0.005). In particular, similarity features contributed to this improvement. Furthermore, we found that the improvement was comparable for masses that were visible and for masses that were not visible on the prior view. These results show that the use of temporal features is an effective approach to improve the characterization of masses.