On the Efficacy of ZnO Nanostructures against SARS-CoV-2

In 2019, the new coronavirus disease (COVID-19), related to the severe acute respiratory syndrome coronavirus (SARS-CoV-2), started spreading around the word, giving rise to the world pandemic we are still facing. Since then, many strategies for the prevention and control of COVID-19 have been studied and implemented. In addition to pharmacological treatments and vaccines, it is mandatory to ensure the cleaning and disinfection of the skin and inanimate surfaces, especially in those contexts where the contagion could spread quickly, such as hospitals and clinical laboratories, schools, transport, and public places in general. Here, we report the efficacy of ZnO nanoparticles (ZnONPs) against SARS-CoV-2. NPs were produced using an ecofriendly method and fully characterized; their antiviral activity was tested in vitro against SARS-CoV-2, showing a decrease in viral load between 70% and 90%, as a function of the material’s composition. Application of these nano-antimicrobials as coatings for commonly touched surfaces is envisaged.     

POD-assisted strategies for structural topology optimization

We propose a new numerical tool for structural optimization design. To cut down the computational burden typical of the Solid Isotropic Material with Penalization (SIMP) method, we apply Proper Orthogonal Decomposition on SIMP snapshots computed on a fixed grid to construct a rough structure (predictor) which becomes the input of a SIMP procedure performed on an anisotropic adapted mesh (corrector). The benefit of the proposed design tool is to deliver smooth and sharp layouts which require a contained computational effort before moving to the 3D printing production phase.     

Be radioactive beam production at CIRCE and its utilization in basic and applied physics

A pure ⁷Be beam with an energy E = 1-8 MeV is available for nuclear and applied physics at the 3 MV Pelletron tandem accelerator CIRCE in Caserta. The beam is produced using an offline technique. Typical analyzed beam intensities are about 2 ppA, using cathodes with an activity of the order of 200 MBq. The ⁷Be implantation has been used for both fundamental nuclear physics and applied physics. In particular, different metals have been implanted with ⁷Be in order to study the influence of the chemical composition and of the number of quasi-free electrons of the host material on the ⁷Be half-life. In the field of applied physics, the ⁷Be implantation turns out to be very interesting for wear measurement. In fact, in this case ⁷Be is used as a depth-sensitive tracer. The continuous detection of the sample activity during the wear allows a high sensitivity measurement of wearing speed. The ⁷Be beam production at CIRCE, the implantation procedure and the results obtained from the ⁷Be half-life measurements and the wear characterization of implanted steel samples are described.     

Coded transmissions for space links affected by solar scintillation: Baseband analysis

A thorough analysis of the behavior of error‐correcting codes over space links affected by solar scintillation is presented. The relevant channel parameters are fixed through the development of a model based on real missions' data. Both telecommand and telemetry links are considered in fast and slow fading conditions. Besides classical coherent modulation schemes, the possibility to use noncoherent modulation schemes is considered, to eliminate the problem of phase tracking. For the case of channels with very slow fading, the use of external interleavers or erasure coding is proposed to cope with error bursts.     

Using survival analysis to investigate the effect of UV-C and heat treatment on storage rot of strawberry and sweet cherry

Ultraviolet light and heat treatment are proposed as alternative techniques for the use of chemicals to reduce the development of the spoilage fungi Botrytis cinerea and Monilinia fructigena on strawberry and sweet cherry, respectively, during storage. In order to investigate the effect of both physical techniques on microbial inactivation and on fruit quality, inoculated berries were subjected to different temperatures (40-48 degrees C) and UV-C doses (0.05-1.50 J/cm2). For each condition, 20 berries were used. After the treatment, fungal growth, visual damage (holes, stains) and fruit firmness were evaluated during a period of 10 days. The experimental data were analysed statistically using survival analysis techniques. Fungal growth on strawberries was significantly retarded using UV-C doses of 0.05 J/cm2 and higher. The same treatment had no significant effect when applied to cherries. The highest doses (1.00 and 1.50 J/cm2) had a negative effect on the calyx of the strawberry, causing browning and drying of the leaves. No beneficial effect of a low temperature treatment (40-48 degrees C) on the shelf life of strawberries was observed, but fungal development on cherries was retarded at temperatures of 45 and 48 degrees C. These temperatures caused severe damage on strawberries (soft stains, holes, decreased firmness), but had no influence on the quality of sweet cherries.     

The influence of hydrogen and nitrogen on the formation of Si nanoclusters embedded in sub-stoichiometric silicon oxide layers

This work reports the study concerning the influence of the preparation conditions on the structure of silicon rich oxide (SRO) deposited by PECVD method by which the structural properties of the film are strictly related. In particular we investigated the role of reactant gases N₂O and SiH₄ on the total Si concentration, Si excess concentration, Si clustered concentration and size of nanoclusters formed by high annealing temperature. We payed particular attention on the role of the hydrogen and nitrogen during the Si agglomeration.The presence of hydrogen atoms on the as-deposited specimen, confirmed by the Si–H bonds peak on the FTIR analysis, has been directly correlated to the silicon excess concentration in the layer. The silicon, oxygen and nitrogen atomic density has been calculated from RBS analysis. These information were coupled to the ones obtained using methodology based on electron energy loss spectroscopy combined with energy filtered images, which allowed us to quantify the clustered silicon concentration in annealed sub-stoichiometric silicon oxide layers (SiO_x). We have verified that the nitrogen dissolved in the layer inhibits the Si excess clustering so that the efficiency of silicon agglomeration process decreases as the nitrogen content increases.     

Metabolic Syndrome and Male Fertility: Beyond Heart Consequences of a Complex Cardiometabolic Endocrinopathy

Metabolic syndrome (MetS) is a highly prevalent condition among adult males, affecting up to 41% of men in Europe. It is characterized by the association of obesity, hypertension, and atherogenic dyslipidemia, which lead to premature morbidity and mortality due to cardiovascular disease (CVD). Male infertility is another common condition which accounts for about 50% of cases of couple infertility worldwide. Interestingly, male infertility and MetS shares several risk factors (e.g., smoking, ageing, physical inactivity, and excessive alcohol consumption), leading to reactive oxygen species (ROS) production and increased oxidative stress (OS), and resulting in endothelial dysfunction and altered semen quality. Thus, the present narrative review aims to discuss the pathophysiological mechanisms which link male infertility and MetS and to investigate the latest available evidence on the reproductive consequences of MetS.     

Accuracy of FIB-4 to Detect Elevated Liver Stiffness Measurements in Patients with Non-Alcoholic Fatty Liver Disease: A Cross-Sectional Study in Referral Centers

The identification of advanced fibrosis by applying noninvasive tests is still a key component of the diagnostic algorithm of NAFLD. The aim of this study is to assess the concordance between the FIB-4 and liver stiffness measurement (LSM) in patients referred to two liver centers for the ultrasound-based diagnosis of NAFLD. Fibrosis 4 Index for Liver Fibrosis (FIB-4) and LSM were assessed in 1338 patients. A total of 428 (32%) had an LSM ≥ 8 kPa, whereas 699 (52%) and 113 (9%) patients had an FIB-4 < 1.3 and >3.25, respectively. Among 699 patients with an FIB-4 < 1.3, 118 (17%) had an LSM ≥ 8 kPa (false-negative FIB-4). This proportion was higher in patients ≥60 years, with diabetes mellitus (DM), arterial hypertension or a body mass index (BMI) ≥ 27 kg/m². In multiple adjusted models, age ≥ 60 years (odds ratio (OR) = 1.96, 95% confidence interval (CI) 1.19–3.23)), DM (OR = 2.59, 95% CI 1.63–4.13), body mass index (BMI) ≥ 27 kg/m² (OR = 2.17, 95% CI 1.33–3.56) and gamma-glutamyltransferase ≥ 25 UI/L (OR = 2.68, 95% CI 1.49–4.84) were associated with false-negative FIB-4. The proportion of false-negative FIB-4 was 6% in patients with none or one of these risk factors and increased to 16, 31 and 46% among those with two, three and four concomitant risk factors, respectively. FIB-4 is suboptimal to identify patients to refer to liver centers, because about one-fifth may be false negative at FIB-4, having instead an LSM ≥ 8 KPa.