Influence of pressurised cryogenic nitrogen technology on Arthrospira platensis (spirulina) preservation during storage

In this study, preservation of spirulina using the new pressurised cryogenic nitrogen technology (PCN) was compared to classical methods used in laboratories and industry. Spirulina morphology was better preserved by PCN compared to unpressurised cryogeny and classical freezing at −20 °C that led to cells fragmentation. A 25% loss of Phycocyanin-C content against 60% were measured after 98 days storage for 6-Bar PCN process and frozen samples, respectively. The Total AntiOxidant Power (PAOT Liquid Technology^®) was used for determination of total antioxidant and oxidant power of spirulina extracts. PAOT value of PCN samples was 50% higher than the frozen sample. From ABTS measurements on PCN spirulina fractions sonicated or not, it was suggested that pressurisation at 6 bars allowed a better preservation of free antioxidants (outside the cells) due to replacement of oxygen by nitrogen in the frozen beads. After dehydration, phycocyanin-C content variation during storage at 20 °C and 33% RH showed higher loss for freeze-dried spirulina treated at 0 compared to 6 Bars.     

Evaluation of two current approaches for the measurement of carbon dioxide diffusive fluxes from lentic ecosystems

The dry ice sowing experiment (DISE) consisted in adding dry ice to a lake and monitoring the subsequent evasion of carbon dioxide (CO2). DISE allowed us to evaluate two approaches commonly used for measuring aquatic CO2 diffusive fluxes: the boundary layer equation (BLE) from Cole and Caraco (1998) and a particular model of static chamber (SC). CO2 evasion measurements with both approaches were compared to CO2 mass budgets as a relative reference to define their recovery coefficients (p). p for the BLE and the SC over the whole measurement period were 101 +/- 14% and 115 +/- 56%, respectively. Results from discrete sampling intervals revealed that the BLE generally provided estimations in good agreement (80-130%) with the mass budgets during both daytime and nighttime. Variations in p for the BLE were related to wind speed and, consequently, piston velocity (k600). The SC overestimated CO2 evasion during daytime (149 +/- 39%), and underestimated it during nighttime (57 +/- 18%). Variations in p for the SC were related to k600, stemming mainly from the alteration of the air/ water temperature gradient.     

Enzymatic browning reactions in apple and apple products

This review examines the parameters of enzymatic browning in apple and apple products that is, phenolic compounds, polyphenoloxidases, and other factors (ascorbic acid and peroxidases), both qualitatively and quantitatively. Then the relationships between intensity of browning and the browning parameters are discussed, including a paragraph on the methods used for browning evaluation. Finally, the different methods for the control of browning are presented.     

Changes in wine yeast storage carbohydrate levels during preadaptation,rehydration and low temperature fermentations

The metabolism of glycogen and trehalose was analysed in a wine yeast strain fermenting at 25 and 13 degrees C. Trehalose and glycogen degradation were completed during the lag phase of fermentation. Ammonia was taken up rapidly and once it had been reduced to negligible amounts, the synthesis of trehalose started. Glycogen followed a similar pattern. If trehalose synthesis was taken as a stress indicator, the fermentation at 13 degrees C could not be considered stressful because the maximum concentrations are similar at both temperatures. In industrial fermentations, and after a preadaptation in grape must for several hours at 18 degrees C, the lag phase was reduced significantly, and this may be why trehalose and glycogen were completely depleted at the beginning of the low temperature fermentation. Various preadaptation conditions were tested so that their influence on trehalose and glycogen degradation could be determined. The presence of fermentable carbon sources, such as glucose or fructose, triggered the mobilisation and use of trehalose. However, just increasing the osmotic pressure did not reduce the trehalose content. No such differences were observed in glycogen metabolism.     

Microrheology: new methods to approach the functional properties of food

Three configurations have been developed to improve the understanding of structural element interactions in food material during deformation. The three configurations combine an inverted confocal scanning laser microscope (CSLM) and a cell that can apply to the sample a specific deformation: continuous shear, linear oscillatory shear and biaxial extension (compression).In the continuous shear and oscillatory shear configurations (OSCs), a zero-velocity plane is created in the sample by moving two plates in opposite direction, maintaining stable observation conditions of the structural behaviour under deformation. The OSC allows simultaneous application of CSLM and diffusing wave spectroscopy, a multiple light scattering technique. The third configuration (compression configuration) allows observation at a stagnation point during rheometric measurements. The configurations accept semi-liquid products (dressing, sauces, dairy products, etc.) for investigations in area such as aggregation, gelation, interactions at interface, coalescence, break-up.     

Prediction of Egg Freshness and Albumen Quality Using Visible/Near Infrared Spectroscopy

Important changes occur in egg during storage leading to loss of quality. Prediction of these changes is critical in order to monitor egg quality and freshness. The aim of this research was to evaluate application of visible (VIS) and near infrared (NIR) spectroscopy as a rapid and non-destructive technique for egg quality assessment. Three hundred and sixty intact white-shelled eggs freshly laid by the same flock of hens fed with a standard feed were obtained. They were put under controlled conditions of temperature and humidity (T = 18 °C and RH = 55%) for 16 days of storage. Forty eggs were analyzed at day 0, 2, 4, 6, 8, 10, 12, 14, and 16. Transmission spectral data was obtained in the range from 350 to 2,500 nm. The non-destructive spectral data was compared to egg sample’s Haugh unit (HU) and albumen pH in terms of quality and to the number of storage days in terms of freshness. A partial least squares predictive model was developed and used to link the destructive assessment methods and the number of storage days with the spectral data. The correlation coefficient between the measured and predicted values of HU, albumen pH, and number of storage days were up to 0.94, R ² was up to 0.90 and the root mean square error values for the validation were 5.05, 0.06, and 1.65, respectively. These results showed that VIS/NIR transmission spectroscopy is a good tool for assessment of egg freshness and albumen pH and can be used as a non-destructive method for the prediction of HU, albumen pH, and number of storage days. In addition, the relevant information about these parameters was in the VIS and NIR ranging from 411 to 1,729 nm.     

Implications of Lactobacillus collinoides and Brettanomyces/Dekkera anomala in phenolic off-flavour defects of ciders

Different Lactobacillus collinoides and Brettanomyces/Dekkera anomala cider strains were studied for their ability to produce volatile phenols in synthetic medium. All strains were able to produce 4-ethylcatechol (4-EC), 4-ethylphenol (4-EP) and 4-ethylguaiacol (4-EG) from caffeic, p-coumaric and ferulic acids, respectively. Interestingly, D. anomala and L. collinoides were also able to produce 4-EC, 4-EP and 4-EG in cider conditions. The quantities of ethylphenols produced by these two species were similar in both tested ciders. The impact of precursor quantities was studied and it showed that the addition of caffeic and p-coumaric acids in ciders allowed for higher 4-EC and 4-EP production by D. anomala and L. collinoides. In parallel, D. anomala and L. collinoides strains were isolated from a phenolic off-flavour defective bottled cider after ethylphenol production hence confirming the implication of these two species in this cider spoilage. Finally, detection thresholds of the main ethylphenols were determined in ciders by orthonasal and retronasal sampling. The 4-EC and 4-EP detection thresholds (close to 20-25mg/l and 1.5-2.0mg/l, respectively) were matrix dependant.     

Prevalence of Salmonella enterica and the hygienic indicator Escherichia coli in raw meat at markets in Ouagadougou, Burkina Faso

This study investigated the hygienic status and prevalence of Salmonella and Escherichia coli in retail meat sold at open markets in Ouagadougou, Burkina Faso. A total of 150 samples of beef meat (n = 45), beef intestine (n = 45), mutton (n = 30), and chicken (n = 30) were collected from four local markets for investigation. The prevalence of Salmonella enterica subsp. enterica was 9.3%, and six serotypes, all previously unreported in Burkina Faso, were identified: Derby, Tilene, Hato, Bredeney, Agona, and Senftenberg. Most of the Salmonella isolates were sensitive to the 12 antimicrobial drugs tested. The prevalence of E. coli was 100% in all the meat types. An assessment of hygiene practices for the production, transportation, display, and vending of the meat revealed unhygienic conditions. Meat sellers had a low education level and poor knowledge of foodborne pathogens and their transmission routes. The findings showed that foodstuff handlers were in dire need of education about safe food handling practices.     

Mycobacterium behavior in wastewater treatment plant, a bacterial model distinct from Escherichia coli and Enterococci

Mycobacteria are waterborne emerging pathogens causing infections in human. Mycobacteria have been previously isolated from wastewater and sludge, but their densities were not estimated due to cultural biases. In order to evaluate the impact of wastewater treatment processes on mycobacteria removal, we used a real time PCR method. First we compared six DNA extraction methods and second we used the more efficient DNA extraction procedure (i.e., enzymatic lysis combined with hexadecyltrimethylammonium bromide-NaCl procedure) in order to quantify Mycobacterium. With the aim to identify parameters that could serve as indicator of mycobacterial behavior, mycobacterial densities were measured in parallel to those of Escherichia coli and enterococci, and to concentrations of chemical parameters usually monitored in wastewater. Mycobacterium reached 5.5 × 10? ± 3.9 × 10? copies/L in the influent, but was not detected in the effluent after decantation and biofiltration. Most mycobacteria (98.6 ± 2.7%, i.e. 2.4 ± 0.7 log??) were removed by the physical-chemical decantation, and the remaining mycobacteria were removed by biofiltration. In contrast, enterococci and E. coli were lightly removed by decantation step and mainly removed by biofiltration. Our results showed that Mycobacterium corresponds to a hydrophobic behavior linked to insoluble compound removal, whereas enterococci and E. coli refer to hydrophilic behaviors linked to soluble compound removals.     

Airflow inside an open ventilated system: Influence of operator’s arms or moving conveyor

This study deals with the influence of static and dynamic objects on the airflow (generated by a unidirectional air supply) inside an “open” ventilated system used in an agro-food production line. Firstly, the presence of operator’s arms, considered here as objects, leads to the appearance of recirculating zones under each arm. The influence of different positions of the static arms protected by gloves on the airflow organization has been studied. Secondly, modifications induced by the motion of a conveyor system or of moving arms on the airflow have been explored.In an experimental approach, airflow organization has been studied by visualization and by Particle Image Velocimetry for static cases and moving conveyor case.Numerical simulations were carried out using Computational Fluids Dynamics codes. Results obtained for moving gloves cases highlight the contribution of dynamic meshes tools, implemented in the CFD codes to make simulations of moving objects.