Influence of post‐extrusion parameters on the final morphology of polystyrene/high density polyethylene blends

The deformation of the dispersed phase in polystyrene/high density polyethylene (PS/HDPE) blends produced by ribbon extrusion was studied numerically and experimentally. A mathematical model for the deformation of the dispersed phase in ribbon extrusion processing of polymer blends was developed assuming uniaxial deformation of the ribbon and the equilibrium shapes of the dispersed particles with a pressure balance over a drop. Simulated morphologies as function of the post‐extrusion parameters were obtained and compared with experiments. The analysis of the ribbon extrusion process showed that parameters such as draw ratio (DR) and ribbon‐water contact length (X) significantly influence the ribbon dimensions, the extensional stress, and the stretching force. The results also showed that deformation and coalescence of the dispersed phase in the ribbon extrusion processing of polymer blends increase at higher DR and/or lower X values. The comparison between the model and the experimental morphologies of PS/HDPE produced a good agreement.     

Reactions of glycerol with poly(ethylene ether carbonate) polyols

Poly(ethylene ether carbonate) polyols can be modified by chemical reactions with polyglycol modifiers under conditions of elevated temperatures and reduced pressures. The modifier becomes chemically incorporated into the modified polyol and is used to control properties such as moisture sensitivity, CO₂ content, T_g, density, etc. in the resultant polyol. However, glycerol cannot be used as a modifier for poly(ethylene ether carbonate) polyols under the same conditions since it reacts with poly(ethylene ether carbonate) polyols by a transesterification reaction sequence to form glyceryl carbonate. As the temperature is increased, the glyceryl carbonate decomposes to yield glycidol and carbon dioxide. These reactions are conveniently followed by ¹³C-NMR. The preparation of glyceryl carbonate by this process has not been previously reported.     

3He impurities on the bulk surface of liquid4He: Possible existence of excited states

We study, using a density-functional approach, the properties of the two-dimensional system formed by³He atoms on the surface of liquid⁴He, as a function of³He coverageN _s , at zero temperature. We find several types of surface states accessible to the³He atoms. For small values ofN _s , the surface tension is, as expected, linear inN _s ² . For a coverage of about half a monolayer, a new type of surface state starts being occupied, and this produces a change in the slope of as a function ofN _s ² and, more clearly, a step in the surface specific heat, which increases by a factor of almost two. Another step is predicted to occur for a coverage of 1.3 monolayer. Existing data are compatible with this structure of surface states but are not numerous enough to prove or disprove the existence of steps.Unité de Recherche des Universités Paris 11 et Paris 6 Associée au CNRS.     

Detection and evaluation of the fibers' deposition parameters during wet filament winding

Wet filament winding technology has been extensively used for the manufacture of rotationally symmetric parts made of fiber-reinforced plastics (FRP). As the design and modeling of FRP-parts require numerous assumptions, deviations between calculated and achieved mechanical properties are expected. One aspect that contributes to this discrepancy is the assumption of a homogeneous rectangular cross-section of the fiber-band. In this work, the fiber-band geometry in a wet-winding process of carbon fiber cylinders is analyzed. An Infrared-optical system for the detection of the fiber bandwidth and winding-angle is implemented. The influence of the winding speed and the resin temperature is analyzed. An image processing algorithm for the automatic measurement of the fiber's bandwidth and winding-angle is developed. Manual and adaptive gamma corrections are implemented to improve image quality. A parameter study for the suitable selection of image processing parameters is performed.     

3D MRI of explanted sheep hearts with submillimeter isotropic spatial resolution: comparison between diffusion tensor and structure tensor imaging

Magnetic Resonance Materials in Physics, Biology and Medicine - The aim of the study is to compare structure tensor imaging (STI) with diffusion tensor imaging (DTI) of the sheep heart...     

Dynamic Model Adaptation for Multiscale Simulation of Hyperbolic Systems with Relaxation

In numerous industrial CFD applications, it is usual to use two (or more) different codes to solve a physical phenomenon: where the flow is a priori assumed to have a simple behavior, a code based on a coarse model is applied, while a code based on a fine model is used elsewhere. This leads to a complex coupling problem with fixed interfaces. The aim of the present work is to provide a numerical indicator to optimize to position of these coupling interfaces. In other words, thanks to this numerical indicator, one could verify if the use of the coarser model and of the resulting coupling does not introduce spurious effects. In order to validate this indicator, we use it in a dynamical multiscale method with moving coupling interfaces. The principle of this method is to use as much as possible a coarse model instead of the fine model in the computational domain, in order to obtain an accuracy which is comparable with the one provided by the fine model. We focus here on general hyperbolic systems with stiff relaxation source terms together with the corresponding hyperbolic equilibrium systems. Using a numerical Chapman–Enskog expansion and the distance to the equilibrium manifold, we construct the numerical indicator. Based on several works on the coupling of different hyperbolic models, an original numerical method of dynamic model adaptation is proposed. We prove that this multiscale method preserves invariant domains and that the entropy of the numerical solution decreases with respect to time. The reliability of the adaptation procedure is assessed on various 1D and 2D test cases coming from two-phase flow modeling.     

Binarised regression tasks: methods and evaluation metrics

Some supervised tasks are presented with a numerical output but decisions have to be made in a discrete, binarised, way, according to a particular cutoff. This binarised regression task is a very common situation that requires its own analysis, different from regression and classification—and ordinal regression. We first investigate the application cases in terms of the information about the distribution and range of the cutoffs and distinguish six possible scenarios, some of which are more common than others. Next, we study two basic approaches: the retraining approach, which discretises the training set whenever the cutoff is available and learns a new classifier from it, and the reframing approach, which learns a regression model and sets the cutoff when this is available during deployment. In order to assess the binarised regression task, we introduce context plots featuring error against cutoff. Two special cases are of interest, the \( UCE \) and \( OCE \) curves, showing that the area under the former is the mean absolute error and the latter is a new metric that is in between a ranking measure and a residual-based measure. A comprehensive evaluation of the retraining and reframing approaches is performed using a repository of binarised regression problems created on purpose, concluding that no method is clearly better than the other, except when the size of the training data is small.     

Reordering space design in statistical machine translation

In Statistical Machine Translation (SMT), the constraints on word reorderings have a great impact on the set of potential translations that is explored during search. Notwithstanding computational issues, the reordering space of a SMT system needs to be designed with great care: if a larger search space is likely to yield better translations, it may also lead to more decoding errors, because of the added ambiguity and the interaction with the pruning strategy. In this paper, we study the reordering search space, using a state-of-the art translation system, where all reorderings are represented in a permutation lattice prior to decoding. This allows us to directly explore and compare different reordering schemes and oracle settings. We also study in detail a rule-based preordering system, varying the length and number of rules, the tagset used, as well as contrasting with purely combinatorial subsets of permutations. We carry out experiments on three language pairs in both directions: English-French, a close language pair; English-German and English-Czech, two much more challenging pairs. We show that even though it might be desirable to design better reordering spaces, model and search errors seem to be the most important issues. Therefore, improvements of the reordering space should come along with improvements of the associated models to be really effective.