Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups

Urethanes of cellobiose and cellulose-containing uretdione groups are synthesized by the reaction of aliphatic and aromatic diisocyanate uretdiones with the saccharides. The syntheses are performed as a heterogeneous reaction in dimethyl acetamide using dibutyl tin dilaurate as a catalyst, as well as a homogeneous reaction in dimethyl acetamide-lithium chloride. Thus, Semisynthetic prepolymers are formed that offer the reactivity of (blocked) isocyanate groups. To demonstrate their reactivity, ring opening of the uretdiones is performed by the addition of a secondary amine to yield the corresponding ureas.     

Mechanical and erosion properties of CaCO3‐EMAA thermal sprayed coatings

Polymer‐ceramic composite coatings manufactured from calcium carbonate and ethylene‐methacrylic acid copolymer (EMAA) were prepared via a thermal spray process employing different CaCO₃ filler sizes (average size of 2.8, 9 or 36 μm) and loading levels from about 2.5 to 7 wt%. The optimum filler feeding characteristics, deposition efficiency and deposition rate were obtained with a 36 μm sized CaCO₃. Tensile properties, peel strength, and the erosion resistance of a pure EMAA and CaCO₃‐EMAA composite coatings were investigated. It was found that the tensile strain at fracture of the composite coating decreased with the addition of filler to a greater degree than that observed in compression‐molded polymer composites. This is attributed to an inhomogenous distribution of the filler, with more being concentrated at the boundaries of the deposited polymer particles, thereby establishing a rigid framework within the coating. Only a small filler content is necessary to establish large changes in the mechanical properties of the coating. The peel strength of a composite coating decreases with filler content, both on a mild steel substrate and a previously sprayed polymer coating. Bonding to the latter is significantly higher and offers a possibility as a bonding layer between substrates and composite coatings. The coefficient of friction is lowered with the addition of a filler. Erosion testing has shown that the erosion resistance of PF111 is little improved overall with filler addition, although some increase is found for filler contents less than 5 vol%. Polym. Eng. Sci. 44:1448–1459, 2004. © 2004 Society of Plastics Engineers.     

Ammonium phosphate slurry rheology and particle properties—The influence of Fe(III) and Al(III) impurities, solid concentration and degree of neutralization

Ammonium phosphate slurries are produced from impure phosphoric acid that contains Fe(III), Al(III) and Mg(II) ions. The insolubility of these metal ions and the onset of solid formation determined as a function of pH or mole ratio (MR) of ammonia to phosphoric acid were consistent with the trend for the pH of formation of the first hydrolysis product that decreases in the following order: Fe(III)<Al(III)<Mg(II). The hydrolysis products of Fe(III) formed at pH>2.0 or MR>0.5 initiate ammonium phosphate crystallization, reduce the size of particles formed and generate attractive interparticle forces. Similarly, the Al(III) hydrolysis products formed later at pH>2.6 MR>0.7), will also initiate further crystallization, adsorb on particles and produce attractive forces. The attractive forces and the high number concentration of particle—particle interactions are responsible for the increased viscosity and non-Newtonian flow behavior displayed at increasing Fe(III) and Al(III) concentration. Mg(II) ions are not hydrolyzed at MR<1.0 so its effect on rheology is negligible and its effect at MR<1.0 is also small as its concentration is much smaller than that of Fe(III) and Al(III) ions. The change in slurry viscosity with the degree of neutralization is also explained in terms of particle size distribution, solubility and solids concentration variations.     

Feeding rats with liposomes or fish oil differently affects their lipid metabolism

Two n‐3 polyunsaturated fatty acid (PUFA)‐rich diets differing in their chemical and physical forms were given to rats during 2 wk. Liposomes [phospholipids (PL) organized in bilayer structures] made from a natural marine lipid extract or a mixture of fats containing fish oil [similar fatty acids esterified in triacylglycerols (TAG)] were used. The influence of n‐3 PUFA dietary sources on plasma parameters, i.e. TAG, cholesterol and PL concentrations, was investigated. A similar hypotriglyceridemic effect of n‐3 PUFA from liposomes or fish oil was observed. In contrast, feeding rats with liposomes led to different PL and cholesterol patterns. In the plasma of rats fed liposomes, total cholesterol amounts were positively correlated with PL levels. Liposome and fish oil feedings caused a marked increase in the amounts of n‐3 PUFA, which occurred mainly at the expense of n‐6 PUFA. However, the enrichment in n‐3 PUFA in the different plasma lipid classes differed substantially when ingested in the form of fish oil or liposomes. These results were interpreted in terms of different lipid bioavailability and metabolic fate during the digestive steps and in the liver, with the dietary source.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

Polyvinylidene fluoride nanofibers obtained by electrospinning and blowspinning: Electrospinning enhances the piezoelectric β-phase – myth or reality?

Considerable effort has been devoted to improving the properties of PVDF (polyvinylidene fluoride), arguably the most technologically important piezoelectric polymer. Electrospinning has been found to be a particularly effective method of producing PVDF nanofibers with superior piezoelectric properties due to the resulting exceptionally high fraction of the piezoelectrically active crystalline β-phase. It is typically assumed that the high external electric fields applied during electrospinning enhance the formation of this β-phase, with the confused literature offering various unsatisfactory mechanistic explanations. However, by comparing PVDF nanofibers produced by two different processes (electrospinning and blowspinning), we show that the electric field is entirely unnecessary; indeed, the crystallization dynamics are principally driven by the applied mechanical stress, as evidenced by structurally identical 200 nm diameter PVDF fibers produced with and without external electric fields.     

Digital narrative conventions in heritage trail mobile apps

ABSTRACT

Galleries, libraries, archives and museums (GLAMs) are increasingly using digital technologies for storytelling and creating mobile applications (apps) for cultural heritage content, but how apps are used in practice to communicate information to users has not been widely studied. A team of people from a heritage organisation, a university, and mobile app development group plan to create a bespoke heritage trail app for Ireland, but to date design conventions/recommendations for this genre are lacking. This article applies a systematic approach to digital narrative content analysis to better understand how apps are being used specifically for heritage trails with the aim of identifying what the common features are, which modalities and narrative techniques are used. The selected corpus included 55 apps downloaded from the Google Play Store. The results of this content analysis—based on the App Walkthrough Method (Light, B., Burgess, J., & Duguay, S. (2018). The walkthrough method: An approach to the study of apps. New Media & Society, 20(3), 881–900)—show that there is a gap between academic research themes/trends and how digital narrative is actually being communicated in the current market, and it aims to inform the future development of heritage trail apps by including a list of design and content features common to this genre.     

Knowledge transfer in virtual settings: the role of individual virtual competency

Economic forces, competitive pressures and technological advances have created an environment within which firms have developed new ways of organizing (e.g. virtual work settings) and managing their resources (e.g. knowledge management) in order to maintain and improve firm performance. Extant research has highlighted the challenges associated with managing knowledge in virtual settings. However, researchers are still struggling to provide effective guidance to practitioners in this field. We believe that a better understanding of individual virtual competency is a potential avenue for managing the complexity of knowledge transfer in virtual settings. In particular, we suggest that optimal knowledge transfers can be achieved by individuals armed with the right personal capabilities and skills for virtual work, particularly when those knowledge transfers are emergent, bottom-up and cannot be specified a priori. The virtual competency exhibited by individuals can be the key to overcoming the constraints of knowledge transfers with such characteristics because underlying competency can facilitate effective action in unfamiliar and novel situations. In this conceptual research, we develop a theoretical model of individual virtual competence and describe its role in the communication process, which underpins effective knowledge transfer in virtual settings. Additionally, we consider the antecedent role that prior experience in virtual activity plays in aiding workers to develop virtual competence, which in turn engenders effective knowledge transfer. We conclude with implications for future research and for practicing managers.     

Statistical analysis of microhardness variations in thermal spray coatings

A thermal barrier coating system consisting of a NiCoCrAlY bond coat and cerium-stabilized zirconia ceramic coating was sprayed on to a metallic substrate. Ageing at 400 and 800°C for 100, 500, and 1000 h was performed. Microhardness measurements of as-sprayed and heat-treated samples were used to evaluate microstructural variations throughout the thermally sprayed coating after different ageing conditions. Forty readings were taken at both the bond coat and ceramic coating positions within the thermal barrier coating (TBC) system and adjusted by subtracting the two largest and two smallest readings. Both data sets were statistically analysed to assess whether they belonged to Weibull or Gaussian (or normal) distributions. This study has established that the homogeneity of coatings, at least as measured by a microhardness test, varies during service and, thus, may influence the lifetime.Nomenclature Confidence limit - Mean value - Standard deviation - ² Variance - Weibull modulus obtained from any method - Characteristic value obtained from any method - CV Coefficient of variation - f(x) Probability density function - F(x) Cumulative density function - i ith order in ascending data set - L Log-likelihood function - m Weibull modulus - n Total number of data points - x Microhardness data - x _i Microhardness data which is ith order in ascending data set - x ₀ Characteristic value which gives 63.2% cumulative density     

Characterization of laser hardened steels by laser induced ultrasonic surface waves

Ultrasonic surface waves are suitable for the characterization of surface hardened materials. This is shown on laser hardened turbine blades. The martensitic microstructure within the surface layer of surface hardened steels has a lower surface wave propagation velocity than the annealed or normalized substrate material. Because the propagation velocity depends on the ratio of layer thickness to wavelengthd/, its measurement allows the determination of the hardening depth. If the surface wave frequency is high enough, the surface wave propagates mainly within the hardened layer. A correlation of the surface wave velocity to the surface hardness has been found. Because the variation of the surface velocity in hardened steels is small, a high measurement accuracy is necessary to obtain the interesting hardening parameters with sufficient certainty. Therefore, a measuring arrangement has been developed where laser pulses, guided by optical fibers to the surface hardened structure, generate simultaneously surface wave pulses at two different positions. The two ultrasonic pulses are received by a piezoelectric transducer. The surface wave velocity is obtained from the time delay between these pulses which is determined by the cross-correlation method. To evaluate simultaneously surface waves with different penetration depths from the same signal acquisition, digital filtering has been used in connection with the cross-correlation.