Bonded concrete overlay of asphalt mechanical-empirical design procedure

Bonded concrete overlays of asphalt pavements (BCOAs) are becoming a common rehabilitation technique used for distressed hot mix asphalt (HMA) roadways. The original design procedures were based primarily on data from instrumented pavements and finite element modelling. They were governed by the assumption that the failure mechanism was a function of the overlay thickness. However, field observations have indicated that the actual failure modes are dictated by slab size. The newly developed Bonded Concrete Overlay of Asphalt Mechanistic-Empirical design procedure (BCOA-ME) presented here is valid for overlays that are between 2.5 and 6.5 in (64–154 mm), and includes five primary enhancements to the Portland Cement Association and Colorado Department of Transportation procedures that have been traditionally used: 1.) the failure mode is dictated by the joint spacing; 2.) a new structural model for longitudinal cracking for 6-ft × 6-ft (1.8 m × 1.8 m) concrete overlays has been developed to better predict the critical stresses; 3.) the stress adjustment factors have been calibrated with performance data; 4.) the equivalent temperature gradients used as design input are defined based on the pavement structure and geographical location of the project; and 5.) the effect of temperature change on underlying HMA stiffness is considered. Finally, validation studies were completed on the new procedure and comparisons made between the revised procedure and actual performance data for five separate projects showed reasonable results. A sensitivity analysis also revealed that the predicted thickness obtained using the revised procedure was sensitive to HMA thickness, the modulus of rupture of the Portland cement concrete, and the level of traffic, as would be expected.     

Ultraschallbasierte in situ Vorspannkraftermittlung an Schrauben ohne Referenzmessung im nicht verspannten Zustand durch Kombination von Longitudinal- und Transversalwellen

Ultrasonic based bolt preload evaluation is commonly performed using the mono-wave method. This method works by measuring the time of flight of longitudinal waves. Here, a reference measurement in the unloaded condition is necessary for each bolt. In this publication the longitudinal wave is complemented by another type of ultrasonic wave - the transverse wave. This method does not require a reference measurement in the unloaded condition for each bolt. Moreover, an analytic method for determining the bolt-specific K-value is introduced, which is needed for the ultrasonic bolt preload determination. The analytically calculated K-values are compared with experimental K-values from tensile tests. The influence of material, bolt property class and surface protection system were determined with cylindrical specimens. In component tests, the bolt preload was evaluated using the bi-wave method, a possible influence of the bolt assembly method was investigated and the results were interpreted regarding their accuracy.     

The response to domestic violence in a model court: some initial findings and implications

This study utilized a non-experimental design to obtain information on a full range of domestic violence incidents brought before the Quincy, Massachusetts District Court, a model court. One limitation of previous research on spouse assaults using more sophisticated designs is that the target population has been restricted to specific subgroups of cases thereby limiting subsequent discussions of policy/practice implications of the findings vis-a-vis all spouse assault cases. To address this research "shortfall", we obtained permission from the Quincy District Court to examine all the spouse assault cases brought before the court during a 7-month period (June, 1995, through February, 1996). The findings show that in a full enforcement environment, victims took out restraining orders only against the most violent, criminally abusive men. Most men who were arrested for domestic violence had prior criminal histories for a variety of offenses. Domestic violence offenders appeared to be of two types: those with extensive and diverse criminal histories and those with little or no such involvement. However, active criminal justice intervention against domestic violence offenders appears to be primarily directed toward offenders already active in the criminal justice system.     

Fiber-optic probes with improved excitation and collection efficiency for deep-UV Raman and resonance Raman spectroscopy

The ability of ultraviolet resonance Raman spectroscopy (UVRRS) to determine structural, environmental, and analytical information concerning low-concentration aqueous biomolecules makes it a powerful bioanalytical and biophysical technique. Unfortunately, its utility has been limited by experimental requirements that preclude in situ or in vivo studies in most cases. We have developed the first high-performance fiber-optic probes suitable for long-term use in pulsed UVRRS applications in the deep- UV (DUV, 205-250 nm). The probes incorporate recently developed improved ultraviolet (IUV) fibers that do not exhibit the rapid solarization and throughput decay that previously hampered the use of optical fibers for delivering pulsed, DUV light. A novel 90 degrees mirrored collection geometry is used to overcome the inner-filtering effects that plague flush-probe geometries. The IUV fibers are characterized with respect to their efficacy at transmitting pulsed, DUV laser light, and prototype probes are used to obtain pulsed UVRRS data of aromatic amino acids, proteins, and hormones at low concentrations with 205-240-nm pulsed excitation. Efficient probe geometries and fabrication methods are presented. The performance of the probes in examining resonance-enhanced Raman signals from absorbing chromophores is investigated, and the optimal excitation wavelength is shown to be significantly red-shifted from the maximum of the resonance Raman enhancement profile. Generally applicable procedures for determining optimal experimental conditions are also introduced.     

Coherent lidar airborne wind sensor II: flight-test results at 2 and 10 νm

The use of airborne laser radar (lidar) to measure wind velocities and to detect turbulence in front of an aircraft in real time can significantly increase fuel efficiency, flight safety, and terminal area capacity. We describe the flight-test results for two coherent lidar airborne shear sensor (CLASS) systems and discuss their agreement with our theoretical simulations. The 10.6-μm CO(2) system (CLASS-10) is a flying brassboard; the 2.02-μm Tm:YAG solid-state system (CLASS-2) is configured in a rugged, light-weight, high-performance package. Both lidars have shown a wind measurement accuracy of better than 1 m/s.     

The effects of different roster schedules on sleep in miners

Shiftwork involving early morning starts and night work can affect both sleep and fatigue. This study aimed to assess the impact of different rostering schedules at an Australian mine site on sleep and subjective sleep quality. Participants worked one of four rosters;

4 × 4 (n = 14) 4D4O4N4O

7 × 4 (n = 10) 7D4O7N40

10 × 5 (n = 17) 5D5N50

14 × 7 (n = 12) 7D7N70

Sleep (wrist actigraphy and sleep diaries) was monitored for a full roster cycle including days off. Total sleep time (TST) was longer on days off (7.0 ± 1.9) compared to sleep when on day (6.0 ± 1.0) and nightshifts (6.2 ± 1.6). Despite an increase in TST on days off, this may be insufficient to recover from the severe sleep restriction occurring during work times. Restricted sleep and quick shift-change periods may lead to long-term sleep loss and associated fatigue.     

Hands-free administration of subjective workload scales: Acceptability in a surgical training environment

Introduction

Subjective workload measures are usually administered in a visual-manual format, either electronically or by paper and pencil. However, vocal responses to spoken queries may sometimes be preferable, for example when experimental manipulations require continuous manual responding or when participants have certain sensory/motor impairments. In the present study, we evaluated the acceptability of the hands-free administration of two subjective workload questionnaires - the NASA Task Load Index (NASA-TLX) and the Multiple Resources Questionnaire (MRQ) - in a surgical training environment where manual responding is often constrained.

Method

Sixty-four undergraduates performed fifteen 90-s trials of laparoscopic training tasks (five replications of 3 tasks - cannulation, ring transfer, and rope manipulation). Half of the participants provided workload ratings using a traditional paper-and-pencil version of the NASA-TLX and MRQ; the remainder used a vocal (hands-free) version of the questionnaires. A follow-up experiment extended the evaluation of the hands-free version to actual medical students in a Minimally Invasive Surgery (MIS) training facility.

Results

The NASA-TLX was scored in 2 ways - (1) the traditional procedure using participant-specific weights to combine its 6 subscales, and (2) a simplified procedure - the NASA Raw Task Load Index (NASA-RTLX) - using the unweighted mean of the subscale scores. Comparison of the scores obtained from the hands-free and written administration conditions yielded coefficients of equivalence of r = 0.85 (NASA-TLX) and r = 0.81 (NASA-RTLX). Equivalence estimates for the individual subscales ranged from r = 0.78 (“mental demand”) to r = 0.31 (“effort”). Both administration formats and scoring methods were equally sensitive to task and repetition effects. For the MRQ, the coefficient of equivalence for the hands-free and written versions was r = 0.96 when tested on undergraduates. However, the sensitivity of the hands-free MRQ to task demands (η_partial² = 0.138) was substantially less than that for the written version (η_partial² = 0.252). This potential shortcoming of the hands-free MRQ did not seem to generalize to medical students who showed robust task effects when using the hands-free MRQ (η_partial² = 0.396). A detailed analysis of the MRQ subscales also revealed differences that may be attributable to a “spillover” effect in which participants’ judgments about the demands of completing the questionnaires contaminated their judgments about the primary surgical training tasks.

Conclusion

Vocal versions of the NASA-TLX are acceptable alternatives to standard written formats when researchers wish to obtain global workload estimates. However, care should be used when interpreting the individual subscales if the object is to make comparisons between studies or conditions that use different administration modalities. For the MRQ, the vocal version was less sensitive to experimental manipulations than its written counterpart; however, when medical students rather than undergraduates used the vocal version, the instrument’s sensitivity increased well beyond that obtained with any other combination of administration modality and instrument in this study. Thus, the vocal version of the MRQ may be an acceptable workload assessment technique for selected populations, and it may even be a suitable substitute for the NASA-TLX.