静压滑环及其应用研究

 介绍了静压滑环的结构特点及其应用． 通过比较静压轴承、配流盘和静压滑环三者之间的不同点，得出静压滑环在结构上是一个自平衡元件，在功能上类似于电刷滑环，因此在固定件和旋转件之间进行流体动力传输时，静压滑环是理想的选择．     

AutoCAD二次开发及在包装机械中的应用

针对包装机械的特点，从二次开发的定义出发，分析比较了AutoCAD二次开发的各种手段形式，给出了应用实例。     

包气带中不同示踪源层条件下核素迁移对比试验

为研究不同示踪源层材料对水份运移和核素迁移的影响，开展了以石英砂和黄土分别为示踪源层载体时Sr、Nd、Ce在包气带中迁移的对比试验。试验历时470d，在两种源层条件下各取土芯样4次。试验结果表明：在喷淋强度为5mm/h、3h/d条件下，Nd和Ce无论在石英砂示踪源层还是黄土示踪源层中浓度峰位均没有明显向下迁移；对于Sr，在黄土示踪源层中，470d后其峰位向下迁移约15cm(按质心计算为10cm左右)，而从石英砂示踪源层中向下迁移不明显（按质心计算，迁移约2.7cm），只是峰位有些展宽。上述结果表明，极薄（7mm）的细石英砂层也能对非饱和入渗水产生明显屏流作用，使得核素从石英砂示踪源层中向下迁移速度减慢。     

大规模电力系统不对称短路的分块射影解法

本文把网络的分块射影法用于大规模电力系统不对称短路的分析计算。研究表明：该方法对短路计算是可行的。一旦求出了射影张量，即可重复用于后续的计算，只需改变故障所在的那一个子网络的射影张量。本文提出的网络分块射影算法为大规模电力系统的分析计算提供了一条崭新的途径。     

Voigt线型及其精确快速算法

通过把上半复平面分为４个区，并在每一区利用不同近似，建立了一种精确快速计算Ｖｏｉｇｔ函数、修正的Ｖｏｉｇｔ函数和Ｖｏｉｇｔ函数偏导数的算法，其最大相对误差小于５×１０－４．该算法是Ｌｉｎｅ－ｂｙ－Ｌｉｎｅ大气透过率／辐射强度计算及其相关应用的有效算法．     

Model-based automated extraction of microtubules from electron tomography volume.

We propose a model-based automated approach to extracting microtubules from noisy electron tomography volume. Our approach consists of volume enhancement, microtubule localization, and boundary segmentation to exploit the unique geometric and photometric properties of microtubules. The enhancement starts with an anisotropic invariant wavelet transform to enhance the microtubules globally, followed by a three-dimensional (3-D) tube-enhancing filter based on Weingarten matrix to further accentuate the tubular structures locally. The enhancement ends with a modified coherence-enhancing diffusion to complete the interruptions along the microtubules. The microtubules are then localized with a centerline extraction algorithm adapted for tubular objects. To perform segmentation, we novelly modify and extend active shape model method. We first use 3-D local surface enhancement to characterize the microtubule boundary and improve shape searching by relating the boundary strength with the weight matrix of the searching error. We then integrate the active shape model with Kalman filtering to utilize the longitudinal smoothness along the microtubules. The segmentation improved in this way is robust against missing boundaries and outliers that are often present in the tomography volume. Experimental results demonstrate that our automated method produces results close to those by manual process and uses only a fraction of the time of the latter.     

ICA结构进化和未来网

ICA是一种含有中间件的网络软件体系结构,旨在以结构进化取得功能突破,据以全面支持来自用户的以及来自系统的各种应用需要。ICA的出台,表明国际上已建立起一种未来网定位新理念。ICA所代表的“信息通信”领域内的网络软件结构进化,立足于把未来网规范为三层结构,即“应用(Application)层”、“中间件(Middleware)层”和“基础(Baseware)层”。ICA的出现,对我国谋求新崛起是大好机遇,这不仅可以直接振兴我国网络软件产业,更可激励我国在新一轮的网络进化的进程中力争跻身“领潮国”的行列。“ICA融合了各种最新信息技术的长处”。ICA结构进化,标志着当今网络进化的时代特征。推进和实现基于ICA的未来网,有着较佳的可行性。     

实用宽带新技术

简要介绍了三种宽带新技术及其应用，包括替代五类线的VDSL，可解决HFC上行噪音漏斗效应的SCDMA技术以及利用电源线传输高速数据的PLC技术。这些新技术由于具有较高的性能价值比和广阔的应用前景，受到了广泛的关注。     

Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.