基于区块链的D2D辅助的MEC资源共享架构

随着终端设备智能化发展与设备到设备（D2D）通信技术的逐渐应用,终端设备可以通过直连链路进行资源共享.为提升网络边缘整体服务能力,提出了一种基于区块链的D2D辅助的多接入边缘计算资源共享架构（BD-MEC）.在BD-MEC下,综合考虑时延、能耗和支付开销等因素,设计了一种基于博弈论的多用户卸载方案,以满足不同用户的服务需求.其次,针对拒绝服务或付款等恶意行为,提出了一种基于智能合约的资源共享协议与争议事件处理方法,利用区块链来强制共享双方遵守资源共享协议,以实现安全的资源共享.仿真结果表明,BD-MEC能有效地降低计算任务的时延、能耗和支付开销.     

An Analytical Model Including Interface Traps and Temperature Effects in Negative Capacitance Double Gate Field Effect Transistor

Silicon - In this paper, an analytical model for negative capacitance double gate field effect transistor (NC-DG-FET) is proposed. This model includes interface traps and temperature effects, which...     

Role of TRPA1 in Tissue Damage and Kidney Disease

TRPA1, a nonselective cation channel, is expressed in sensory afferent that innervates peripheral targets. Neuronal TRPA1 can promote tissue repair, remove harmful stimuli and induce protective responses via the release of neuropeptides after the activation of the channel by chemical, exogenous, or endogenous irritants in the injured tissue. However, chronic inflammation after repeated noxious stimuli may result in the development of several diseases. In addition to sensory neurons, TRPA1, activated by inflammatory agents from some non-neuronal cells in the injured area or disease, might promote or protect disease progression. Therefore, TRPA1 works as a molecular sentinel of tissue damage or as an inflammation gatekeeper. Most kidney damage cases are associated with inflammation. In this review, we summarised the role of TRPA1 in neurogenic or non-neurogenic inflammation and in kidney disease, especially the non-neuronal TRPA1. In in vivo animal studies, TRPA1 prevented sepsis-induced or Ang-II-induced and ischemia-reperfusion renal injury by maintaining mitochondrial haemostasis or via the downregulation of macrophage-mediated inflammation, respectively. Renal tubular epithelial TRPA1 acts as an oxidative stress sensor to mediate hypoxia–reoxygenation injury in vitro and ischaemia–reperfusion-induced kidney injury in vivo through MAPKs/NF-kB signalling. Acute kidney injury (AKI) patients with high renal tubular TRPA1 expression had low complete renal function recovery. In renal disease, TPRA1 plays different roles in different cell types accordingly. These findings depict the important role of TRPA1 and warrant further investigation.     

麻石烟气脱硫装置耐酸胶泥的研究

通过对用于麻石烟气脱硫装置的2^#和3^#耐酸胶泥的单因素对比试验的研究，得出2^#胶泥耐酸度较好，因而防腐蚀性能也较好。这不仅回收了固废，而且还具有可观的环境效益。     

碳化硅晶须双重加热合成的研究

双重加热法是低成本、大批量合成碳化硅晶须的新技术，合成温度低、合成时间短、生成率高。对以炭黑和二氧化硅微粉为原料、用双重加热法合成碳化硅晶须的工艺过程进行了研究。观察了不同合成时间、合成温度和催化剂条件下的碳化硅晶须，揭示出不同工艺参数对合成的碳化硅晶须的产出率，微观形貌、直径和长度范围的影响。结果表明，催化剂的使用可以加快反应速度，提高碳化硅晶须的生成率，合成过程为VLS。实验中初步得到的最佳经济工艺参数为：Fe2O3的用量为2％，合成时间为1．5h，合成温度为1250℃。此时的该工艺条件下碳化硅晶须的生成率可达80％，晶须平均直径为0．6μm，平均长度为30μm。     

生色团4′-正戊烷氧基-4-氰基二联苯的合成及表征

用对氰基二联苯酚和硫溴法自制的正溴戊烷合成了非线型光生色团4′-正戊烷氧基-4-氰基二联苯(4′-(oentyloxy)-4-biphenylcarbonitrile-5OCB)；测定了正溴戊烷的物理性质，与标准正溴戊烷的性质符合。根据50CB的红外特征峰数据，认为合成物5OCB结构与其理论结构相符。     

Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution. Part II: An electrochemical quartz crystal microbalance study

Electropolymerization of phenol and mono-, di-, tri-, pentachlorophenols was studied using EQCM on a Pt electrode at 0.78 V (SHE) in 1 M NaOH solution containing 0.1 M of the corresponding phenol. The highest electropolymerization rate was found for ortho-substituted chlorophenols indicating a weak fouling of the electrode. Low electropolymerization rates for para-substituted chlorophenols suggest a low permeability of the polymer film, resulting in rapid electrode fouling. The EQCM data suggest that electropolymerization of chlorophenols occurs without Cl-elimination for the monomers with unsubstituted ortho and para positions. Dechlorination is most pronounced for electropolymerization of para-substituted isomers. The mechanism of electropolymerization of chlorophenols is discussed.     

含活性硅氧烷型大分子改性剂BA-MMA-VTES的合成与表征

针对弱极性天然/丁苯橡胶复合体系,从分子设计的角度出发,选择乙烯基三乙氧基硅氧烷(VTES)、丙烯酸丁酯(BA)、甲基丙烯酸甲酯(MMA)为单体,通过自由基溶液聚合并优化了反应条件:在85℃和115℃分别加入两种不同量的引发剂BPO和DCP,均保温反应2h,合成了三元共聚物BA-MMA-VTES大分子表面改性剂,用于纳米碳化硅、氮化硅陶瓷粉体的表面改性。采用FTIR、NMR、GPC、DSC、TGA等对所合成的三元共聚物的结构、性质和数均相对分子质量进行了分析和表征。通过FTIR、NMR测试结果,证实了BA-MMA-VTES三元共聚物的结构;通过GPC测试,证明BA-MMA-VTES三元共聚物的数均相对分子质量控制在3000～10000;DSC显示合成的大分子只有一个Tg,在3.3℃左右,表明它是无规共聚物,柔性适中;TGA显示三元共聚物主要热分解区间在280～500℃,热稳定性良好。     

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

In this study, a kind of novel damping materials was prepared based on the blend of chlorinated butyl rubber (CIIR) and polyacrylate (PAc) synthesized by different molar ratio of butyl methacrylate and ethyl acrylate. Research results from experiments and analyses by employing DMA, TEM, and FTIR show that whether at a cocured system or noncocured system, it can be achieved to shift a loss peak of CIIR towards a higher temperature region and to keep the damping value from markedlly decreasing, which broadens the effective damping function area of CIIR to the vicinity of ambient temperature. In the former system, the thermodynamical miscibility of CIIR and PAc, to some extent, is predominated by the molecular design of PAc, while in the latter system, covulcanized networks play a more significant role in improving compatibility and abating the peak split, though the suppression effect of thermal stress on the transition of CIIR T_ll transition still can not be neglected. Furthermore, transition state derived from the cocuring CIIR and PAc cannot make the phase separation completely take place, and consequently results in the deformation of phase morphology of the cocured CIIR/PAc blend. It is the influence of thermodynamics miscibility and forced compatibility in different size that makes the suppression effect of foreign PAc on CIIR T_ll transition be controllable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3127–3133, 2006     

硅通孔化学机械平坦化中铜去除的电化学与选择性研究

利用极化曲线测量法研究了甘氨酸和过氧化氢浓度及pH对硅通孔(TSV)化学机械平坦化(CMP)中铜腐蚀的影响。结果表明:甘氨酸对铜的腐蚀随其浓度增大而增强;随着过氧化氢浓度增大,铜腐蚀电位逐渐增大;在p H为10时铜的腐蚀效果最佳。CMP实验表明,在不同浓度的甘氨酸和过氧化氢之下,抛光速率可调,达1.9~5.8μm/min,铜表面粗糙度为5~29 nm,铜钽去除速率比为20~50。