Two computational regimes of a single-compartment neuron separated by a planar boundary in conductance space

Recent in vitro data show that neurons respond to input variance with varying sensitivities. Here we demonstrate that Hodgkin-Huxley (HH) neurons can operate in two computational regimes: one that is more sensitive to input variance (differentiating) and one that is less sensitive (integrating). A boundary plane in the 3D conductance space separates these two regimes. For a reduced HH model, this plane can be derived analytically from the V nullcline, thus suggesting a means of relating biophysical parameters to neural computation by analyzing the neuron's dynamical system.     

Capillary-driven pumping for passive degassing and fuel supply in direct methanol fuel cells

In this paper we present a new concept of creating and using capillary pressure gradients for passive degassing and passive methanol supply in direct methanol fuel cells (DMFCs). An anode flow field consisting of parallel tapered channels structures is applied to achieve the passive supply mechanism. The flow is propelled by the surface forces of deformed CO₂ bubbles, generated as a reaction product during DMFC operation. This work focuses on studying the influence of channel geometry and surface properties on the capillary-induced liquid flow rates at various bubbly gas flow rates. Besides the aspect ratios and opening angles of the tapered channels, the static contact angle as well as the effect of contact angle hysteresis has been identified to significantly influence the liquid flow rates induced by capillary forces at the bubble menisci. Applying the novel concept, we show that the liquid flow rates are up to thirteen times higher than the methanol oxidation reaction on the anode requires. Experimental results are presented that demonstrate the continuous passive operation of a DMFC for more than 15 h.     

Rotor Position Estimation for Permanent Magnet Synchronous Machines using Electromotive Force and Anisotropy Using Extended-Kalman-Filter

In this paper a new rotor position observer for permanent magnet synchronous machines (PMSM) based on an Extended-Kalman-Filter (EKF) is presented. With this method, just one single EKF is sufficent to evaluate the position information from electromotive force (EMF) and anisotropy. Thus, the PMSM can be controlled for the entire speed range without a position sensor and without the need to switch or synchronize between different observers. The approach covers online estimation of permanent magnetic field and mechanical load. The resulting EKF-based rotor position estimator is embedded in the existing cascaded control concept of the PMSM without need of additional angle trackers or signal filters. The experimental validation for the position sensorless control shows optimized dynamic behaviour.

     

Controlled counter-flow motion of magnetic bead chains rolling along microchannels

We demonstrate controlled transport of superparamagnetic beads in the opposite direction of a laminar flow. A permanent magnet assembles 200 nm magnetic particles into about 200 μm long bead chains that are aligned in parallel to the magnetic field lines. Due to a magnetic field gradient, the bead chains are attracted towards the wall of a microfluidic channel. A rotation of the permanent magnet results in a rotation of the bead chains in the opposite direction to the magnet. Due to friction on the surface, the bead chains roll along the channel wall, even in counter-flow direction, up to at a maximum counter-flow velocity of 8 mm s⁻¹. Based on this approach, magnetic beads can be accurately manoeuvred within microfluidic channels. This counter-flow motion can be efficiently be used in Lab-on-a-Chip systems, e.g. for implementing washing steps in DNA purification.     

Truck scheduling at zero-inventory cross docking terminals

Handling freight at cross docking terminals constitutes a complex planning task which comprises several executive steps as shipments delivered by inbound trucks are to be unloaded, sorted according to their designated destinations, moved across the dock and finally loaded onto outbound trucks for an immediate delivery elsewhere in the distribution system. To enable an efficient synchronization of inbound and outbound flows, a careful planning of operations, e.g. by computerized scheduling procedures, becomes indispensable. This work treats a special truck scheduling problem arising in the (zero-inventory) cross docks of the food industry, where strict cooling requirements forbid an intermediate storage inside the terminal, so that all products are to be instantaneously loaded onto refrigerated outbound trucks. The problem is formalized such that different operational objectives, i.e. the flow time, processing time and tardiness of outbound trucks, are minimized. To solve the resulting truck scheduling problem suited exact and heuristic solution procedures are presented.     

Multistage System Planning for Hydrogen Production and Distribution

Hydrogen is an energy carrier that has the potential to improve the sustainability of transportation fuels and reduce oil dependence. This paper presents a stochastic dynamic programming model for sequentially building a hydrogen production and distribution system. The decision variables are the sequence and locations of the central production sites and the corresponding distribution systems from supply to demand sites. A case study based on the geographic setting of Northern California is included, in which the hydrogen is produced via coal gasification and transported from plant to city gates (demand sites) by cryogenic liquid hydrogen trucks. Future demands for hydrogen are modeled as uncertain parameters, with an assumption that hydrogen fuel cell vehicle (HFCV) market penetration rate increases from 1% to 25% over a 20-year period. This model provides multistage decision support for long term transportation energy planning at national and regional levels.     

Setpoint regulation for stochastically interacting robots

We present an integral feedback controller that regulates the average copy number of an assembly in a system of stochastically interacting robots. The mathematical model for these robots is a tunable reaction network, which makes this approach applicable to a large class of other systems, including ones that exhibit stochastic self-assembly at various length scales. We prove that this controller works for a range of setpoints and how to compute this range both analytically and experimentally. Finally, we demonstrate these ideas on a physical testbed.     

Integrated micro Pirani gauge based hermetical package monitoring for uncooled VO x bolometer FPAs

This paper presents the design and fabrication of a micro Pirani gauge using VO _x as the sensitive material for monitoring the pressure inside a hermetical package for micro bolometer focal plane arrays (FPAs). The designed Pirani gauge working in heat dissipating mode was intentionally fabricated using standard MEMS processing which is highly compatible with the FPAs fabrication. The functional layer of the micro Pirani gauge is a VO _x thin film designed as a 100 × 200 μm pixel, suspended 2 μm above the substrate. By modeling of rarefied gas heat conduction using the Extended Fourier’s law, finite element analysis is used to investigate the sensitivity of the pressure gauge. Also the thermal interactions between the micro Pirani gauge and bolometer FPAs are verified. From the fabricated prototype, the measured device TCR is about −0.8% K⁻¹ and the sensitivity about 1.84 × 10⁻³ W K⁻¹ mbar⁻¹.     

Estimating body shape of dressed humans

The paper presents a method to estimate the detailed 3D body shape of a person even if heavy or loose clothing is worn. The approach is based on a space of human shapes, learned from a large database of registered body scans. Together with this database we use as input a 3D scan or model of the person wearing clothes and apply a fitting method, based on ICP (iterated closest point) registration and Laplacian mesh deformation. The statistical model of human body shapes enforces that the model stays within the space of human shapes. The method therefore allows us to compute the most likely shape and pose of the subject, even if it is heavily occluded or body parts are not visible. Several experiments demonstrate the applicability and accuracy of our approach to recover occluded or missing body parts from 3D laser scans.     

Der Stand der Forschung zur Erfolgsmessung von Informationssystemen

Measuring information systems (IS) success is of great interest to both researchers and practitioners. This article examines multidimensional approaches to measuring IS success and explores the current state of IS success research through a literature review and by classifying articles published between 2003 and 2007. Based on a total of 41 academic journal and conference publications, the relevant research carried out is identified, while the research results are categorized, consolidated, and discussed. The results show that the dominant empirical research analyzes the individual impact of a certain type of information system by ascertaining users’ evaluation of it by means of surveys and then applying structural equation modeling. The DeLone and McLean Information Systems Success Model is the main theoretical basis of the reviewed empirical studies. This article provides researchers with a comprehensive review and structuring of IS success research. Furthermore, opportunities for additional development are identified and future research directions suggested.