Blood mercury following DMPS administration to subjects with and without dental amalgam

The use of DMPS as a diagnostic tool in patients with symptoms allegedly caused by mercury from dental amalgam fillings is disputed. We have previously shown that the mercury concentrations in urine cannot be used in such a way. In the present study, we wished to evaluate the effect on blood mercury levels (B-Hg) following intravenously injected DMPS in four groups of subjects: 19 controls without amalgam experience; 21 healthy controls with amalgam fillings; 20 patients with self-reported symptoms from existing dental amalgams; and 20 patients who had removed amalgam fillings. A single dose of DMPS (2 mg/kg) was injected. Blood samples were collected prior to the injection and after 15, 30, 120 min, and after 24 h, and mercury was analyzed by cold vapor atomic absorption spectrophotometry. All groups showed an initial drop of 24 to 30% in the blood levels, approaching baseline values (2.5-5.5 microg/l) after 2 h. The subjects with no amalgam experience had the lowest mercury values. There was no significant difference between the three groups with such experience. There were no significant differences between the two groups with amalgam fillings present. Patients with symptoms allegedly caused by amalgam were not different from the control groups. There were indications that part of the urinary mercury excreted during the first 30 min originated from blood.     

Full angle spatial compounding for improved replenishment analyses in contrast perfusion imaging: in vitro studies

For contrast enhanced perfusion imaging semi-quantitative methods (such as the bolus-, replenishment- or depletion-method) are commonly used to analyze the dynamic changes in concentration of contrast agent induced by insonification. In order to apply these methods and to decrease artifacts from tissue nonlinearity, perfusion imaging is conducted using decreased transmit power. However, echo signals from deeper structures are often too weak to be successfully analyzed. Furthermore, shadowing artifacts may occur as a result of high concentration of contrast agent in the beam path. Thus, those semi-quantitative methods often fail or yield ambiguous diagnoses. Imaging an object (e.g., the female breast) from multiple viewing angles (spatial compounding) may overcome these issues. In addition, spatial compounding achieves an isotropic resolution and reduces speckle and further common artifacts. In this paper we present results obtained from a combination of spatial compounding with contrast enhanced perfusion imaging. Applying the replenishment method, we extracted perfusion-related parameters and compared the conventional parametric images with the compound parametric images. We found that the compounded parametric images outperform the conventional images due to reduced noise and suppression of artifacts.     

Semi-Godunov schemes for general triangular systems of conservation laws

General m × m triangular systems of conservation laws in one space dimension are considered. These systems arise in applications like multi-phase flows in porous media and are non-strictly hyperbolic. Simple and efficient finite-volume schemes of the Godunov type are devised. These are based on a local decoupling of the system into a series of single conservation laws with discontinuous coefficients and are hence termed semi-Godunov schemes. These schemes are not based on the characteristic structure of the system. Some useful properties of the schemes are derived and several numerical experiments demonstrate their robustness and computational efficiency.     

Ultrafast spin dynamics in colloidal ZnO quantum dots

Time-resolved Faraday rotation measurements in the ultraviolet have been performed to reveal the ultrafast spin dynamics of electrons in colloidal ZnO quantum dots. Oscillating Faraday rotation signals are detected at frequencies corresponding to an effective g factor of g = 1.96. Biexponential oscillation decay is observed that is due to (i) rapid depopulation of the fundamental exciton (tau = 250 ps) and (ii) slow electron spin dephasing ( T 2 = 1.2 ns) within a metastable state formed by hole-trapping at the quantum dot surface.     

Effective nanoconfinement of 2LiBH4–MgH2 via simply MgH2 premilling for reversible hydrogen storages

To improve nanoconfinement of LiBH₄ and MgH₂ in carbon aerogel scaffold (CAS), particle size reduction of MgH₂ by premilling technique before melt infiltration is proposed. MgH₂ is premilled for 5 h prior to milling with LiBH₄ and nanoconfinement in CAS to obtained nanoconfined 2LiBH₄–premilled MgH₂. Significant confinement of both LiBH₄ and MgH₂ in CAS, confirmed by SEM–EDS–mapping results, is achieved due to MgH₂ premilling. Due to effective nanoconfinement, enhancement of CAS:hydride composite weight ratio to 1:1, resulting in increase of hydrogen storage capacity, is possible. Nanoconfined 2LiBH₄–premilled MgH₂ reveals a single–step dehydrogenation at 345 °C with no B₂H₆ release, while dehydrogenation of nanoconfined sample without MgH₂ premilling performs in multiple steps at elevated temperatures (up to 430 °C) together with considerable amount of B₂H₆ release. Activation energy (E_A) for the main dehydrogenation of nanoconfined 2LiBH₄–premilled MgH₂ is considerably lower than those of LiBH₄ and MgH₂ of bulk 2LiBH₄–MgH₂ (ΔE_A = 31.9 and 55.8 kJ/mol with respect to LiBH₄ and MgH₂, respectively). Approximately twice faster dehydrogenation rate are accomplished after MgH₂ premilling. Three hydrogen release (T = 320 °C, P(H₂) = 3–4 bar) and uptake (T = 320–325 °C, P(H₂) = 84 bar) cycles of nanoconfined 2LiBH₄–premilled MgH₂ reveal up to 4.96 wt. % H₂ (10 wt. % H₂ with respect to hydride composite content), while the 1st desorption of nanoconfined sample without MgH₂ premilling gives 4.30 wt. % of combined B₂H₆ and H₂ gases. It should be remarked that not only kinetic improvement and B₂H₆ suppression are obtained by MgH₂ premilling, but also the lowest dehydrogenation temperature (T = 320 °C) among other modified 2LiBH₄–MgH₂ systems is acquired.     

Risk factors for intramammary infections and subclinical mastitis in post-partum dairy heifers

The prevalence of intramammary infections (IMI) and subclinical mastitis (SCM) in 436 German Holstein heifers was put in relation with clinical findings of the udder and data regarding individual rearing and housing conditions of the animals. The clinical examination took place on the day of the livestock auction (at approximately 41 d in milk, DIM). On that day, 31% of the heifers had IMI in at least one quarter, and 18% of all quarters were infected. Coagulase-negative staphylococci were the most prevalent bacteria isolated, accounting for 68% of the positive samples. Data were analysed by logistic regression. Criteria such as 'juvenile intersucking', 'teats shorter than 35 mm', 'teats with a diameter <18 mm' and 'udder oedema at the day of the auction' were associated with IMI in heifers during the first 41 DIM. Loose-housing systems during pregnancy (as opposed to tie-stalls), juvenile intersucking, clinical mastitis during the first week after calving, teat diameters <18 mm, and employing organic bedding material in the stables before calving were associated with subclinical mastitis.     

Initial adhesion of Listeria monocytogenes to solid surfaces under liquid flow

Some strains of the food borne pathogen Listeria monocytogenes persist in food processing environments. The exact reason behind this phenomenon is not known, but strain differences in the ability to adhere to solid surfaces could offer an explanation. In the present work, initial adhesion of nine strains of L. monocytogenes was investigated under liquid flow at two levels of shear stress on six different surfaces using a flow chamber set-up with microscopy measurements. The surfaces tested were glass and PVC, and glass coated with beef extract, casein, and homogenised and unhomogenised milk. In addition, the effect of prior environmental stress (5% NaCl, low nutrient availability) on initial adhesion was investigated. The hydrophobicity of the investigated surfaces was determined by contact angle measurements and the surface properties of the investigated L. monocytogenes strains were determined using Microbial Adhesion To Solvents (MATS). All surfaces with the exception of PVC were found to be hydrophilic. Strain differences were found to significantly influence the initial adhesion rate (IAR) of all nine strains to all the surfaces (p < 0.05) at both low and high shear stress. Furthermore, there was a significant effect of the surfaces tested (p < 0.05) in the adhesion ability of almost all strains. The IAR was affected by flow rate (shear stress) as seen by a decrease in adhesion at high shear stress for most strains. A significant effect of interactions between strain-surface and strain-shear stress (p < 0.001) was observed but not of interactions between surface-shear stress. No correlation between surface hydrophobicity and IAR was observed. Addition of 5% NaCl during propagation resulted in a decrease in IAR whilst propagation in low nutrient media caused an increase indicating a general change in surface characteristics under these conditions. Known persisting strains did not display general better adherence.     

Printing of Highly Integrated Crossbar Junctions

A new process is presented that combines nanoimprint lithography and soft lithography to assemble metal–bridge–metal crossbar junctions at ambient conditions. High density top and bottom metal electrodes with half‐pitches down to 50 nm are fabricated in a parallel process by means of ultraviolet nanoimprint lithography. The top electrodes are realized on top of a sacrificial layer and are embedded in a polymer matrix. The lifting of the top electrodes by dissolving the sacrificial layer in an aqueous solution results in printable electrode stamps. Crossbar arrays are noninvasively assembled with high yield by printing the top electrode stamps onto bare or modified bottom electrodes. A semiconducting and a quasi metal like conducting type of polymer are incorporated in the cross points to form metal‐polymer‐metal junctions. The electrical characterization of the printed junctions revealed that the functional integrity of the electrically addressed conductive polymers is conserved during the assembling process. These findings suggest that printing of electrodes represents an easy and cost effective route to highly integrated nanoscale metal‐bridge‐metal junctions if imprint lithography is used for electrode fabrication.     

1D nanofabrication with a micrometer-sized laser spot

A simple laser-assisted procedure for the fabrication of functional organic nanostructures is demonstrated. Native silicon samples are coated with alkylsiloxane monolayers and patterned with a focused beam of an Ar(+) laser (lambda = 514 nm). After patterning, the coating is chemically functionalized following a robust preparation scheme. Despite a laser spot diameter of about 2.5 mum, this routine allows for the fabrication of well-confined organosiloxane stripes with widths below 100 nm. As shown, these structures provide a versatile means for building ordered surface architectures of nanoscopic components. In particular, gold nanoparticles (d = 16 nm) self-assemble into one-dimensional arrangements, such as single chains.