Physical,mechanical and dry sliding wear properties of hybrid and non-hybrid Al–V nanocomposites produced by powder metallurgy

The present work aims to characterise the sliding wear behaviour of non-hybrid Al–Al₃V and hybrid Al–(Al₃V, Al₂O₃) nanocomposites. Wear rates were calculated from mass loss measurements. X-Ray diffraction (XRD) pattern was utilised to evaluate the microstructural changes during milling hot-pressed samples. It was found that the wear resistance of hybrid nanocomposites was enhanced by increasing Al₃V–Al₂O₃ percentage due to an increase in hardness. The mass loss measurement showed that not only was the wear rate of hybrid samples lower than that of Al–Al₃V, but also it had lower friction coefficients in comparison to the non-hybrid sample. The worn surface evaluation in hybrid samples indicated that the formed darker layer possesses the features of the mechanically mixed layer (MML), which inhibits mass loss intensification. Moreover, formation of MML as a lubricant layer promotes the friction characteristic of the hybrid nanocomposite.     

Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification

As the metal additive manufacturing (AM) industry moves towards industrial production, the need for qualification standards covering all aspects of the technology becomes ever more prevalent. While some standards and specifications for documenting the various aspects of AM processes and materials exist and continue to evolve, many such standards still need to be matured or are under consideration/development within standards development organizations. An important subset of this evolving the standardization domain has to do with critical property measurements for AM materials. While such measurement procedures are well documented, with various legacy standards for conventional metallic material forms such as cast or wrought structural alloys, many fewer standards are currently available to enable systematic evaluation of those properties in AM-processed metallic materials. This is due in part to the current lack of AM-specific standards and specifications for AM materials and processes, which are a logical precursor to the material characterization standards for any material system. This paper summarizes some of the important standardization activities, as well as limitations associated with using currently available standards for metal AM with a focus on measuring mission-critical properties. Technical considerations in support of future standards development, as well as a pathway for qualification/certification of AM parts enabled by the appropriate standardization landscape, are discussed.     

Computationally efficient pseudo-viscoelastic models for evaluation of residual stresses in thermoset polymer composites during cure

In this study of the constitutive modelling of thermoset polymers during cure, we compare what we call the “cure hardening instantaneously linear elastic (CHILE)” approach with the more computationally intensive viscoelastic approach. The CHILE approach is popular compared to the viscoelastic approach as the cost of material characterization, data reduction, finite element model development and implementation, and computer run time is significantly lower. However, CHILE models suffer from the fact that the justification for their validity is essentially anecdotal, rather than based on a clear linkage to viscoelastic theory; and in related manner, materials characterization is done at an intuitively low but essentially arbitrary frequency. In this work we show that there are approximations that allow the full viscoelastic approach to be simplified progressively, and that these approximations are appropriate for the typical cure cycle undergone by a thermoset polymer. We present the functions of time at which the elastic modulus of the polymer should be calibrated for these simplified ‘pseudo-viscoelastic’ models, and show that for the uniaxial loading of a fully constrained block of polymer undergoing a given cure cycle, the predicted residual stresses compare very well with those computed using the full viscoelastic model. For further simplification, at the price of slightly lower accuracy and generality, a constant time or frequency can be chosen to evaluate the modulus. In general, we show that the CHILE approach, when properly calibrated, is a valid and efficient pseudo-viscoelastic (PVE) model, and that there is a continuum of trade-off of investment versus accuracy as we go from a full viscoelastic approach to the simplest CHILE approach.     

Simulation of Convective Heat Transfer of Gas–Liquid Bubble Train Flow in Wet Microtube

In this paper, a direct numerical simulation of a two‐phase incompressible gas–liquid flow for simulation of bubble motion and convective heat transfer in a microtube is presented. The microtube radius is 10 μm. The interface between the two phases is tracked by the volume of fluid method with the continuous surface force model. Newtonian flows are solved using a finite volume scheme based on the PISO algorithm. Numerical simulation is done on an axisymmetric domain with a periodic boundary condition for different values of pressure gradient, void fraction, and bubble period. Mean pressure gradient is fixed for each simulation. The superficial Reynolds numbers of gas and liquid phases studied are 0.3 to 7 and 5 to 210, respectively. Numerical results are coincident with the Serizawa regime map, and there is a linear relation between the void fraction and gas flow ratio. Simulation shows local Nusselt number increases in the presence of a gas bubble.     

A Century of Fractionated Radiotherapy: How Mathematical Oncology Can Break the Rules

Radiotherapy is involved in 50% of all cancer treatments and 40% of cancer cures. Most of these treatments are delivered in fractions of equal doses of radiation (Fractional Equivalent Dosing (FED)) in days to weeks. This treatment paradigm has remained unchanged in the past century and does not account for the development of radioresistance during treatment. Even if under-optimized, deviating from a century of successful therapy delivered in FED can be difficult. One way of exploring the infinite space of fraction size and scheduling to identify optimal fractionation schedules is through mathematical oncology simulations that allow for in silico evaluation. This review article explores the evidence that current fractionation promotes the development of radioresistance, summarizes mathematical solutions to account for radioresistance, both in the curative and non-curative setting, and reviews current clinical data investigating non-FED fractionated radiotherapy.     

Investigation of precursors concentration in spray solution on the optoelectronic properties of CuInSe2 thin films deposited by spray pyrolysis method

Copper indium selenide CuInSe₂(CISe) thin films were deposited by chemical spray pyrolysis (CSP) method of CuInS₂(CIS) and subsequent selenization process. To study the effects of solution concentration, we prepared different precursors solution of CIS including different amount of indium salts from 0.025 to 0.100 M with In/Cu 1.25 and S/In 4. These results propose that solution concentration is critical for inflecting the morphological, optical, electrical, and electrochemical characteristics of solution-processed CISe films and device performance. The studied morphological properties of deposited samples were homogenous, crack-free with large grains in indium salt concentrations more than 0.075 M. The deposited film thickness depends on the spray precursor concentration and increases for higher concentration. In addition with increasing of indium precursor concentration from 0.025 to 0.100 M in spray solution, the optical bandgap of deposited film decreases from 1.40 to 1.35 eV. Also the films mobility and carrier density were notably influenced by any change in the solution concentration. Electrical and electrochemical properties showed a decrease in carrier density from?~?10²⁰ to?~?10¹⁷ cm^?3 and the increase in mobility of order?~?10^–7 to?~?10^–2 cm²/V s, respectively, for 0.025 M, 0.100 M CISe films. All films exhibited p-type conductivity owing to different concentrations. However, it seems that the concentration of the ideal solution is 0.100 molars.

     

Molecular Insight into the Therapeutic Effects of Stem Cell-Derived Exosomes in Respiratory Diseases and the Potential for Pulmonary Delivery

Respiratory diseases are the cause of millions of deaths annually around the world. Despite the recent growth of our understanding of underlying mechanisms contributing to the pathogenesis of lung diseases, most therapeutic approaches are still limited to symptomatic treatments and therapies that only delay disease progression. Several clinical and preclinical studies have suggested stem cell (SC) therapy as a promising approach for treating various lung diseases. However, challenges such as the potential tumorigenicity, the low survival rate of the SCs in the recipient body, and difficulties in cell culturing and storage have limited the applicability of SC therapy. SC-derived extracellular vesicles (SC-EVs), particularly SC-derived exosomes (SC-Exos), exhibit most therapeutic properties of stem cells without their potential drawbacks. Similar to SCs, SC-Exos exhibit immunomodulatory, anti-inflammatory, and antifibrotic properties with the potential to be employed in the treatment of various inflammatory and chronic respiratory diseases. Furthermore, recent studies have demonstrated that the microRNA (miRNA) content of SC-Exos may play a crucial role in the therapeutic potential of these exosomes. Several studies have investigated the administration of SC-Exos via the pulmonary route, and techniques for SCs and SC-Exos delivery to the lungs by intratracheal instillation or inhalation have been developed. Here, we review the literature discussing the therapeutic effects of SC-Exos against respiratory diseases and advances in the pulmonary route of delivery of these exosomes to the damaged tissues.     

Consolidation of soft clay foundation improved by geosynthetic-reinforced granular columns: Numerical evaluation

Soft clays are problematic soils as they present high compressibility and low shear strength. There are several methods for improving in situ conditions of soft clays. Based on the geotechnical problem's geometry and characteristics, the in situ conditions may require reinforcement to restrain instability and construction settlements. Granular columns reinforced by geosynthetic material are widely used to reduce settlements of embankments on soft clays. They also accelerate the consolidation rate by reducing the drainage path's length and increasing the foundation soil's bearing capacity. In this study, the performance of encased and layered granular columns in soft clay is investigated and discussed. The numerical results show the significance of geosynthetic stiffness and the column length on the embankment settlements. Furthermore, the results show that granular columns may play an important role in dissipating the excess pore water pressures and accelerating the consolidation settlements of embankments on soft clays.     

An integrated model for solving cell formation and cell layout problem simultaneously considering new situations

Cellular manufacturing system (CMS) is one of the group technology (GT) usages. Among the necessary decisions for a successful CMS implementation, cell formation problem (CFP) and cell layout problem (CLP) are two most popular ones. The majority of past studies in CMS discussed on CFPs and some of those focused on CLP ones. A few researchers solve the CPF and CLP simultaneously. In this paper, we present a new integrated mathematical model considering cell formation and cell layout simultaneously. The goal of our model is to group similar parts and corresponding different machines in same cells. Machines sequence in each cell and cell positions is also specified in the system. Moreover, our proposed model considers forward and backtracking movements as well as new assumptions for distances between cells using sequence data and production volume. One appropriate adjusted measure from the literature and two new measures of performance for evaluating solutions are defined. To validate the model, two well-known critical benchmark examples are employed. Computational experiments demonstrate that our proposal is a proficient model and show the effectiveness of our implementation.