A voltammetric sensor for the detection of 2-aminophenol in the presence of bisphenol A using a carbon paste electrode modified with N-doped reduced graphene oxide/CuO nanocomposite and ionic liquid

Journal of Materials Science: Materials in Electronics - In present work, a novel and facile electrode was constructed using the modification of carbon paste electrode (CPE) with N-doped reduced...     

Comparison between lipid and protein oxidation progress in the tail and claw muscles of signal crayfish (Pacifastacus leniusculus)

Microbial activity and then oxidation progress are the most important freshness indicators during post-mortem. In this study, we monitored proteomic and microbial changes, as well as biochemical degradation, in the tail and claw muscles of crayfish stored for 12 days at +4 °C. One specified protein band at 107 kDa in the claw muscle and two specified protein bands in the tail muscle at 140 and 36–40 kDa were identified. Western blotting indicated a higher amount of oxidised proteins in the tail compared to the claw muscle. Tail muscle showed higher oxidation progress and calpain activity than claw one. Both muscles were spoiled after 12 days with respect to total viable counts. In the first days, calpain activity is the main reason for protein degradation, while protein oxidation dominates for the rest of the time. Lipid–protein oxidation progress showed probably, protein oxidation started earlier than lipid oxidation in both muscles.     

Large-scale load capacity tests on a geosynthetic encased column

Stone columns have been used to minimize the settlement of embankments on soft soils but their use in very soft soils can become challenging, partly because of the low confinement provided by the surrounding soil. Geosynthetic encased columns (GECs) have been successfully used to enhance to reduce settlements of embankments on soft soils. This paper describes an investigation on the performance of encased columns constructed on a very soft soil using different types of encasement (three woven geotextiles with different values of tensile stiffness) and different column fill materials (sand, gravel and recycled construction and demolition waste, RCDW). The results of load capacity tests conducted on large-scale models constructed to simulate the different types of GECs indicate that the displacement method adopted during column installation can lead to an enhanced shear strength in the smear zone that develops within the very soft soil. In addition, breakage of the column fill material was found to affect the load-settlement response of gravel and RCDW columns. Furthermore, the excess pore water pressure generated in the surrounding soil during installation, was found to remain limited to radial distances smaller than three times the GEC diameter.     

Nature‐inspired meta‐heuristic algorithms for solving the load balancing problem in the software‐defined network

The growth of the networks has difficult network management. Recently, a concept called software‐defined network (SDN) has been proposed to address this issue, which makes network management more adaptable. Control and forwarding planes are separated in SDN. The control plane is a centralized logical controller that controls the network. The forwarding plane that consists of transfer devices is responsible for transmitting packets. Because the network resources are limited, optimizing the use of resources in the networks is an important issue. Load balancing improves the balanced distribution of loads across multiple resources in order to maximize the reliability and network resources efficiency. SDN controllers can create an optimal load balancing compared to traditional networks because they have a network global view. The load‐balancing problem can be solved using many different nature‐inspired meta‐heuristic techniques because it has the NP‐complete nature. Hence, for solving load balancing problem in SDN, nature‐inspired meta‐heuristic techniques are important methods. However, to the best of our knowledge, there is not a survey or systematic review on studying these matters. Accordingly, in the area of the load balancing in the SDN, this paper reviews systematically the nature‐inspired meta‐heuristic techniques. Also, this study demonstrates advantages and disadvantages regarded of the chosen nature‐inspired meta‐heuristic techniques and considers their algorithms metrics. Moreover, to apply better load balancing techniques in the future, the important challenges of these techniques have been investigated.     

Multi-target tracking using CNN-based features: CNNMTT

Multimedia Tools and Applications - In this paper, we focus mainly on designing a Multi-Target Object Tracking algorithm that would produce high-quality trajectories while maintaining low...     

An efficient inexact Full Adder cell design in CNFET technology with high-PSNR for image processing

The design of inexact circuits at the transistor level remarkably improves figures of merits such as power consumption, delay, energy, and area. Therefore, inexact technique for designing circuits has attracted the attention of researchers worldwide. Designing inexact Full Adder cell as a building block of a variety of arithmetic circuits can affect the entire electronic system’s performance. In this paper, two novel inexact 1-bit Full Adder cells are presented using carbon nanotube field effect transistors (CNFETs). The capacitive threshold logic (CTL) is used to realize the proposed cells. Comprehensive simulations at two levels of abstraction, i.e., application and hardware are carried out to evaluate the efficacy of these circuits. First, the motion detector which is one of the image processing applications is deployed in MATLAB software to measure peak signal-to-noise ratio (PSNR) figure of merit. At hardware level, the HSPICE tool is used to carry out simulations and measure power, delay, power-delay product (PDP), energy-delay product (EDP), power-delay-area product (PDAP) and power-delay-area-PSNR product (PDAPP). Simulation results confirmed the superiority of the proposed Full Adder cells compared to others. For instance, the proposed 6TIFA improves PDAPP metric at least 21% and at most 76% compared to its counterparts at 0.9V power supply.     

Wideband Frequency-Reconfigurable Antenna for Airborne Applications

Wireless Personal Communications - One of the important objectives of underwater acoustic sensor network is to extend the lifespan of a network which depends on the topology control mechanisms....     

The Role of Selectively Located Commercial Graphene Nanoplatelets in the Electrical Properties,Morphology, and Stability of EVA/LLDPE Blends

Graphene nanoplatelets (GN) produced on a large scale by mechanochemical exfoliation of graphite are incorporated in a co‐continuous ethylene‐vinyl acetate/linear low‐density polyethylene (EVA/LLDPE) blend. Two different processing routes are chosen to selectively place GN in the EVA phase or force its migration to the EVA/LLDPE interface. The results show a drastic decrease in the electrical percolation threshold when the blends are compared to the respective single‐polymer composites. Even with the presence of agglomerates, GN particles are able to migrate to the blend interface and stabilize the morphology and hence the electrical properties. Annealing the insulating samples at processing temperatures causes a drastic increase in conductivity due to continued GN migration and blend morphology coarsening. Semi‐conductive samples, in which a more robust GN network is already established during processing, present no change in morphology but a slight increase in conductivity during annealing. The mechanical performance of the materials is also evaluated and some of the blends with GN present similar elongation at break as pure EVA, but with increased tensile modulus and tensile strength. The electrical performance at different working temperatures shows that the EVA/LLDPE/GN composites are good candidates to act as a semi‐conductive screen material in power cables or as anti‐static materials in electronic devices.     

A fast response hafnium selective polymeric membrane electrode based on N,N'-bis(alpha-methyl-salicylidene)-dipropylenetriamine as a neutral carrier

In this study a new hafnium selective sensor was fabricated from polyvinylchloride (PVC) matrix membrane containing neutral carrier N,N'-bis(alpha-methyl-salicylidene)-dipropylenetriamine (Mesaldpt) as a new ionophore, sodium tetraphenyl borate (NaTPB) as anionic discriminator and dioctyl phthalate (DOP) as plasticizing solvent mediator in tetrahydrofuran solvent. The electrode exhibits Nernstian response for Hf(4+) (Hafnium(IV)) over a wide concentration range (2.0 x 10(-7) to 1.0 x 10(-1)M) with the determination coefficient of 0.9966 and slope of 15.1+/-0.1 mVdecades(-1). The limit of detection is 1.9 x 10(-7)M. The electrode has a fast response time of 18s and a working pH range of 4-8. The proposed membrane shows excellent discriminating ability towards Hf(4+) ion with regard to several alkali, alkaline earth transition and heavy metal ions. It can be used over a period of 1.5 months with good reproducibility. It is successfully applied for direct determination of Hf(4+) in solutions by standard addition method for real sample analysis.     

Sonochemical degradation of Basic Blue 41 dye assisted by nanoTiO2 and H2O2

The sonolysis of Basic Blue 41 dye in aqueous solution was performed at 35 kHz using ultrasonic power of 160 W and aqueous temperature of 25+1 degrees C within 180 min. The TiO2 nanoparticles were used as a catalyst to assist the sonication process. The effect of experimental parameters such as pH, H2O2 concentration and initial dye concentration on the reaction were investigated. It was recognized that in lower pH values the dye removal rate decreased. However, dye removal increased via increase in H2O2 concentration and lowering the initial dye concentration. All intermediate compounds were detected by integrated gas chromatography-mass spectrometry (GC/MS) and also ion chromatograph (IC). During the decolorization, all nitrogen atoms and aromatic groups of Basic Blue 41 were converted to urea, nitrate, formic acid, acetic acid and oxalic acid, etc. Kinetic studies revealed that the degradation process followed pseudo-first order mechanism with the correlation coefficient (R2) of 0.9918 under experimental conditions. The results showed that power ultrasound can be regarded as an appropriate tool for degradation of azo dyes to non-toxic end products.