Copper indium selenide CuInSe2(CISe) thin films were deposited by chemical spray pyrolysis (CSP) method of CuInS2(CIS) and subsequent selenization process. To study the effects of solution concentration, we prepared different precursors solution of CIS including different amount of indium salts from 0.025 to 0.100 M with In/Cu 1.25 and S/In 4. These results propose that solution concentration is critical for inflecting the morphological, optical, electrical, and electrochemical characteristics of solution-processed CISe films and device performance. The studied morphological properties of deposited samples were homogenous, crack-free with large grains in indium salt concentrations more than 0.075 M. The deposited film thickness depends on the spray precursor concentration and increases for higher concentration. In addition with increasing of indium precursor concentration from 0.025 to 0.100 M in spray solution, the optical bandgap of deposited film decreases from 1.40 to 1.35 eV. Also the films mobility and carrier density were notably influenced by any change in the solution concentration. Electrical and electrochemical properties showed a decrease in carrier density from?~?1020 to?~?1017 cm?3 and the increase in mobility of order?~?10–7 to?~?10–2 cm2/V s, respectively, for 0.025 M, 0.100 M CISe films. All films exhibited p-type conductivity owing to different concentrations. However, it seems that the concentration of the ideal solution is 0.100 molars.
Knowledge sharing is an activity through which knowledge, namely, information, skills, or expertise, is exchanged between people, friends, families, communities or organizations. Online knowledge sharing activities are flourishing with the advent of social media and digital life. However, despite of the importance of the online knowledge sharing methods and mechanisms, there is not any comprehensive and systematic study about studying and analyzing its important techniques. Therefore, the main aim of this paper, the comprehensive, detailed, and systematic study, and survey of the state-of-the-art knowledge sharing mechanisms in an online environments is provided. Also, this paper presents a systematic literature review (SLR) on the online knowledge sharing literatures up to end of 2015. We identified 348 papers, which are reduced to 251 primary studies through our paper selection process. Also, the broad overview of the literature provides insights into potential areas for further research. By providing state-of-the-art information, this survey will directly support academics and practicing professionals in their understanding of developments in online knowledge sharing mechanisms and techniques. 相似文献
Over time, architectural ornaments have had a variety of forms that are created from a combination of different types of materials and factors. Brick decorations are one such example, a type of ornament that is often formed on the exterior façade of buildings. Investigating covert rules and brick bonds geometry can reveal a part of the ancient architectural secrets and ways used to reduce the ravages upon new brick façades. Shaped bricks in traditional Iranian architecture directly affect the placement, size and brick arrangement rules. This article is the first attempt to study the effects of geometry and the principal rules of arrangement that help to shape the formation of brick façades specifically, as well as analysing the samples of brick façades taken from monuments, field recordings and discussion with the workmen themselves. The analysis has revealed that permanent rules govern the bonding of brick façades, along with the size and dimensions of the brick effects, which shape the final look of the decoration. 相似文献
We provide a smoothed analysis of Hoare’s find algorithm, and we revisit the smoothed analysis of quicksort. Hoare’s find algorithm—often called quickselect or one-sided quicksort—is an easy-to-implement algorithm for finding the k-th smallest element of a sequence. While the worst-case number of comparisons that Hoare’s find needs is Θ(n2), the average-case number is Θ(n). We analyze what happens between these two extremes by providing a smoothed analysis. In the first perturbation model, an adversary specifies a sequence of n numbers of [0,1], and then, to each number of the sequence, we add a random number drawn independently from the interval [0,d]. We prove that Hoare’s find needs $\Theta(\frac{n}{d+1} \sqrt{n/d} + n)$ comparisons in expectation if the adversary may also specify the target element (even after seeing the perturbed sequence) and slightly fewer comparisons for finding the median. In the second perturbation model, each element is marked with a probability of p, and then a random permutation is applied to the marked elements. We prove that the expected number of comparisons to find the median is $\Omega((1-p) \frac{n}{p} \log n)$. Finally, we provide lower bounds for the smoothed number of comparisons of quicksort and Hoare’s find for the median-of-three pivot rule, which usually yields faster algorithms than always selecting the first element: The pivot is the median of the first, middle, and last element of the sequence. We show that median-of-three does not yield a significant improvement over the classic rule. 相似文献
A modified version of Boosted Mixture of Experts (BME) is presented in this paper. While previous related works, namely BME, attempt to improve the performance by incorporating complementary features of a hybrid combining framework, they have some drawback. Analyzing the problems of previous approaches has suggested several modifications that have led us to propose a new method called Boost-wise Pre-loaded Mixture of Experts (BPME). We present a modification in pre-loading (initialization) procedure of ME, which addresses previous problems and overcomes them by employing a two-stage pre-loading procedure. In this approach, both the error and confidence measures are used as the difficulty criteria in boost-wise partitioning of problem space.
This study was conducted on the visible–near-infrared camouflage properties of olive hue poly(ethylene terephthalate) multifilament mass dyed yarn textured by two texturizing method (simultaneous and conventional). The effect of thermal process and structural changes on the reflectance, mechanical, and crimp properties of these yarns was studied using the DSC, XRD, and birefringence analyses. It was observed that simultaneously textured mass dyed multifilament yarns have higher crimp properties and lower mechanical properties. Furthermore, the effect of yarns’ geometry in the fabric structure on the reflectance properties was investigated using images of fabric structure. The results showed that the reflectance behavior of fabric sample is affected by two major factors, namely structural and geometrical factors; it is clear that the geometrical factor has a significant effect on the reflectance properties. 相似文献
In this paper, a direct numerical simulation of a two‐phase incompressible gas–liquid flow for simulation of bubble motion and convective heat transfer in a microtube is presented. The microtube radius is 10 μm. The interface between the two phases is tracked by the volume of fluid method with the continuous surface force model. Newtonian flows are solved using a finite volume scheme based on the PISO algorithm. Numerical simulation is done on an axisymmetric domain with a periodic boundary condition for different values of pressure gradient, void fraction, and bubble period. Mean pressure gradient is fixed for each simulation. The superficial Reynolds numbers of gas and liquid phases studied are 0.3 to 7 and 5 to 210, respectively. Numerical results are coincident with the Serizawa regime map, and there is a linear relation between the void fraction and gas flow ratio. Simulation shows local Nusselt number increases in the presence of a gas bubble. 相似文献