High‐Temperature Neutron Diffraction,Raman Spectroscopy,and First‐Principles Calculations of Ti3SnC2 and Ti2SnC

Herein, we report—for the first time—on the additive‐free bulk synthesis of Ti₃SnC₂. A detailed experimental study of the structure of the latter together with a secondary phase, Ti₂SnC, is presented through the use of X‐ray diffraction (XRD), and high‐resolution transmission microscopy (HRTEM). A previous sample of Ti₃SnC₂, made using Fe as an additive and Ti₂SnC as a secondary phase, was studied by high‐temperature neutron diffraction (HTND) and XRD. The room‐temperature crystallographic parameters of the two MAX phases in the two samples are quite similar. Based on Rietveld analysis of the HTND data, the average linear thermal expansion coefficients of Ti₃SnC₂ in the a and c directions were found to be 8.5 (2)·10^?6 K^?1 and 8.9 (1)·10^?6 K^?1, respectively. The respective values for the Ti₂SnC phase are 10.1 (3)·10^?6 K^?1 and 10.8 (6)·10^?6 K^?1. Unlike other MAX phases, the atomic displacement parameters of the Sn atoms in Ti₃SnC₂ are comparable to those of the Ti and C atoms. When the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Sn atoms. In the case of the Ti and C atoms, the agreement is more qualitative. We also used first principles to calculate the elastic properties of both Ti₂SnC and Ti₃SnC₂ and their Raman active modes. The latter are compared to experiment and the agreement was found to be good.     

Grauwasserreinigung mit einer Sumpfpflanzenmatte unter Praxisbedingungen

There is increasing interest worldwide in the decentralized treatment of gray water. Since ground‐level areas are generally costly, gray‐water treatment can also be carried out using helophyte mats on the roofs of buildings as an alternative. Alongside the water treatment itself, this process also has a positive effect on the indoor climate in the building. In a test carried out under realistic conditions, it was shown that a helophyte mat with a root‐layer depth of 0.1 m and with hydraulic loads per unit up to 15 L m^?2d^?1 is suitable for treating typical gray water from a residential building.     

Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti–6Al–4V

The residual stress state of coatings influences tool life and performance in machining significantly. Due to thermo-mechanical loads during the cutting process the coatings require tailored properties. Beside the coating structure the two most important properties are the residual stress state and the chemical composition of the coating. Therefore, the influence of these two properties is investigated in this study, comparing the cutting performance in continuous and interrupted cutting of 42CrMo4 (AISI 4140) and Ti–6Al–4V. It is shown that the residual stress states of the coating close to the surface and close to the substrate are important for the wear behavior. High compressive residual stresses near the substrate combined with a material-optimized composition increase the resistance against chipping. Flank wear resistance increases with high compressive residual stresses near the surface and decreasing stresses towards the substrate.     

Fire‐retardant hybrid thermosetting resins from unsaturated polyesters and polysilazanes

This introduces an organic–inorganic thermosetting hybrid resin system based on unsaturated polyester and polysilazanes. It shows the chemical modification of unsaturated polyester structures by end capping to enable the combination of both components. In general, halogen‐free unsaturated polyesters are not fire‐retardant and have to be equipped with additives. Fillers and intumescent additives are preponderantly used in today's fire‐retardant formulations. In contrast to these fire‐retardants, polysilazanes act as ceramizing agents. Polysilazanes are suitable fire‐retardants for resin transfer molding due to their low viscosity. Both burning behavior and glass transition temperature (T_g) are investigated as important application properties. In contrast to state‐of‐the‐art fire‐retardant formulations polysilazane‐based thermosetting hybrid resins burn with high intensity and fast extinction. Therefore, total heat and smoke emission is decreased. The formation of ceramic structures during burning results in high residual mechanical properties and a low mass loss. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40375.     

Effect of pH,co-monomer content,and surfactant structure on the swelling behavior of microgel-azobenzene-containing surfactant complex

The contraction/swelling transition of anionic PNIPAM-co-AAA particles can be manipulated by light using interactions with cationic azobenzene-containing surfactant. In this study the influence of pH-buffers and their concentrations, the charge density (AAA content) in microgel particles as well as the spacer length of the surfactant on the complex formation between the microgel and surfactant is investigated. It is shown that the presence of pH buffer can lead to complete blocking of the interactions in such complexes and the resulting microgel contraction/swelling response. There is a clear competition between the buffer ions and the surfactant molecules interacting with microgel particles. When working in pure water solutions with fixed concentration (charge density) of microgel, the contraction/swelling of the particles is controlled only by relative concentration (charge ratio) of the surfactant and AAA groups of the microgel. Furthermore, the particle contraction is more efficient for shorter spacer length of the surfactant. The onset point of the contraction process is not affected by the surfactant hydrophobicity. This work provides new insight into the interaction between microgel particles and photo-sensitive surfactants, which offers high potential in new sensor systems.     

Progress in the Enzymatic Saccharification of Wheat Starch

Problems were noticed when trying to include wheat starch to the normal liquefaction and saccharification lines because of the formation of precipitations which are difficult to filter. The effects of different side activities of Aspergillus niger glucoamylases on the filterability of wheat syrups are demonstrated. In order to speed up filtration, viscosity has to be decreased by degradation of arabinoxylanes with present pentosanes. A new enzyme has been discovered which is able to split partially the lysophospholipids contained in wheat starch and let the insoluble components flocculate to big particles. This enzyme splits the phospholipids into free fatty acids and glycerophophorylcholines. The properties of this enzyme present in a novel glucoamylase preparation for the wheat starch processing are demonstrated by using an HPLC method, showing the degradation of wheat lipids as well as synthetic lysophopholipids.     

The Role of Oncostatin M and Its Receptor Complexes in Cardiomyocyte Protection,Regeneration, and Failure

Oncostatin M (OSM), a member of the interleukin-6 family, functions as a major mediator of cardiomyocyte remodeling under pathological conditions. Its involvement in a variety of human cardiac diseases such as aortic stenosis, myocardial infarction, myocarditis, cardiac sarcoidosis, and various cardiomyopathies make the OSM receptor (OSMR) signaling cascades a promising therapeutic target. However, the development of pharmacological treatment strategies is highly challenging for many reasons. In mouse models of heart disease, OSM elicits opposing effects via activation of the type II receptor complex (OSMR/gp130). Short-term activation of OSMR/gp130 protects the heart after acute injury, whereas chronic activation promotes the development of heart failure. Furthermore, OSM has the ability to integrate signals from unrelated receptors that enhance fetal remodeling (dedifferentiation) of adult cardiomyocytes. Because OSM strongly stimulates the production and secretion of extracellular proteins, it is likely to exert systemic effects, which in turn, could influence cardiac remodeling. Compared with the mouse, the complexity of OSM signaling is even greater in humans because this cytokine also activates the type I leukemia inhibitory factor receptor complex (LIFR/gp130). In this article, we provide an overview of OSM-induced cardiomyocyte remodeling and discuss the consequences of OSMR/gp130 and LIFR/gp130 activation under acute and chronic conditions.