The PANOPTIC Camera: A Plenoptic Sensor with Real-Time Omnidirectional Capability

A new biologically-inspired vision sensor made of one hundred “eyes” is presented, which is suitable for real-time acquisition and processing of 3-D image sequences. This device, named the Panoptic camera, consists of a layered arrangement of approximately 100 classical CMOS imagers, distributed over a hemisphere of 13 cm in diameter. The Panoptic camera is a polydioptric system where all imagers have their own vision of the world, each with a distinct focal point, which is a specific feature of the Panoptic system. This enables 3-D information recording such as omnidirectional stereoscopy or depth estimation, applying specific signal processing. The algorithms dictating the image reconstruction of an omnidirectional observer located at any point inside the hemisphere are presented. A hardware architecture which has the capability of handling these algorithms, and the flexibility to support additional image processing in real time, has been developed as a two-layer system based on FPGAs. The detail of the hardware architecture, its internal blocks, the mapping of the algorithms onto the latter elements, and the device calibration procedure are presented, along with imaging results.     

A Direct Approach to Organic/Inorganic Semiconductor Hybrid Particles via Functionalized Polyfluorene Ligands

Controlled Suzuki–Miyaura coupling polymerization of 7′‐bromo‐9′,9′‐dioctyl‐fluoren‐2′‐yl‐4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolane initiated by bromo(4‐tert‐butoxycarbonylamino‐phenyl)(tri‐tert‐butylphosphine)palladium ( 1 ) or bromo(4‐diethoxyphosphoryl‐phenyl)(tri‐tert‐butylphosphine)palladium ( 2 ) yields functionalized polyfluorenes (M_n = 4 × 10³ g mol^?1, M_w/M_n < 1.2) with a single amine or phosphonic acid, respectively, end‐group. High temperature synthesis of cadmium selenide quantum dots with these functionalized polyfluorenes as stabilizing ligands yields hybrid particles consisting of good quality (e.g. emission full width at half maximum of 30 nm; size distribution σ < 10%) inorganic nanocrystals with polyfluorene attached to the surface, as corroborated by transmission electron microscopy analysis and analytical ultracentrifugation. Sedimentation studies on particle dispersions show that a substantial portion (ca. half) of the phosphonic acid terminated polyfluorene ligands is bound to the inorganic nanocrystals, versus ca. 5% for the amino‐functionalized polyfluorene ligands. Single particle micro‐photoluminescence spectroscopy shows an efficient and complete energy transfer from the polyfluorene layer to the inorganic quantum dot.     

Binary Controls on Interfacial Magnetism in Manganite Heterostructures

The complex interfacial correlations provide new routes toward tunable functionalities. Here, the wide range of tunabilities for magnetic properties are presented, including Curie temperature (from 245 to 320 K), coercive field (from 2 to 205 Oe), and saturated magnetic moment (from 0.9 to 2.8 µ_B Mn^?1), in a 9‐unit‐cell La_2/3Sr_1/3MnO₃ (LSMO) layer via modifying interfacial boundary conditions. Moreover, the LSMO/PbTiO₃‐based multilayers and superlattices that consist of PbTiO₃/LSMO/NdGaO₃ and PbTiO₃/LSMO/PbTiO₃ interfaces are characterized by two distinct Curie temperatures and coercive fields. The results reveal the feasibility of the interface‐resolved strategy based on boundary modification in fabricating potential devices with multiple accessible states for information storage. The wide‐range modulations on magnetic properties at LSMO/titanate interfaces are explained in terms of binary controls arising from the oxygen octahedral coupling (OOC) and magnetoelectric coupling (MEC). The results not only shed some light on understanding interfacial correlations in oxide heterostructures, but also pave an alternative path for exploring multiple accessible states in all‐oxide‐based electronic devices.     

Glycocalyx‐Like Hydrogel Coatings for Small Diameter Vascular Grafts

Novel biological vascular conduits, such as decellularized tissue engineered vascular grafts (TEVGs) are hindered by high thrombogenicity. To mimic the antithrombogenic surface of native vessels with a continuous glycosaminoglycan layer that is present on endothelial cells (ECs), a hyaluronic acid (HA) modified surface is established, to effectively shield blood platelets from collagen‐triggered activation. Using the amine groups present on 4 mm diameter decellularized TEVGs, a continuous HA hydrogel coating is built via a bifunctional thiol‐reactive cross‐linker, thereby avoiding nonspecific collagen matrix cross‐linking. The HA hydrogel layer recreates a luminal wall, “hiding” exposed collagen from the bloodstream. In vitro blood tests show that adhered platelets, fibrinogen absorption, and fibrin formation on HA‐coated decellularized TEVGs are significantly lower than on uncoated decellularized TEVGs. The HA surface also inhibits macrophage adhesion in vitro. HA‐coated decellularized syngeneic rat aortae (≈1.5 mm diameter), and TEVGs in rat and canine models, respectively, are protected from aggressive thrombus formation, and preserve normal blood flow. Re‐endothelialization is also observed. HA‐coated TEVGs may be an off‐the‐shelf small‐diameter vascular graft with dual benefits: antithrombogenic protection and promotion of endothelium.     

Nanoscale Insight Into Lead‐Free BNT‐BT‐xKNN

Piezoresponse force microscopy (PFM) is used to afford insight into the nanoscale electromechanical behavior of lead‐free piezoceramics. Materials based on Bi_1/2Na_1/2TiO₃ exhibit high strains mediated by a field‐induced phase transition. Using the band excitation technique the initial domain morphology, the poling behavior, the switching behavior, and the time‐dependent phase stability in the pseudo‐ternary system (1–x)(0.94Bi_1/2Na_1/2TiO₃‐0.06BaTiO₃)‐xK_0.5Na_0.5NbO₃ (0 <= x <= 18 mol%) are revealed. In the base material (x = 0 mol%), macroscopic domains and ferroelectric switching can be induced from the initial relaxor state with sufficiently high electric field, yielding large macroscopic remanent strain and polarization. The addition of KNN increases the threshold field required to induce long range order and decreases the stability thereof. For x = 3 mol% the field‐induced domains relax completely, which is also reflected in zero macroscopic remanence. Eventually, no long range order can be induced for x >= 3 mol%. This PFM study provides a novel perspective on the interplay between macroscopic and nanoscopic material properties in bulk lead‐free piezoceramics.     

Topology control for fault-tolerant communication in wireless ad hoc networks

Fault-tolerant communication and energy efficiency are important requirements for future-generation wireless ad hoc networks, which are increasingly being considered also for critical application domains like embedded systems in automotive and aerospace. Topology control, which enables multi-hop communication between any two network nodes via a suitably constructed overlay network, is the primary target for increasing connectivity and saving energy here. In this paper, we present a fault-tolerant distributed topology control algorithm that constructs and continuously maintains a k-regular and k-node-connected overlay for energy-efficient multi-hop communication. As a by-product, it also builds a hierarchy of clusters that reflects the node density in the network, with guaranteed and localized fault-tolerant communication between any pair of cluster members. The construction algorithm automatically adapts to a dynamically changing environment, is guaranteed to converge, and exhibits good performance as well.     

Role of acidic sphingomyelinase in thymol‐mediated dendritic cell death

Scope : Thymol is a component of several plants with antimicrobial activity. Little is known about the effects of thymol on immune cells of the host. This study addressed the effects of thymol on dendritic cells (DCs), regulators of innate and adaptive immunity. Methods and results : Immunohistochemistry, Western blotting and fluorescence‐activated cell sorting analysis were performed in bone marrow‐derived DCs either from wild‐type mice or from mice lacking acid sphingomyelinase (ASM^?/?) treated and untreated for 24 h with thymol (2–100 μg/mL). Thymol treatment resulted in activation of ASM, stimulation of ceramide formation, downregulation of anti‐apoptotic Bcl‐2 and Bcl‐xL proteins, activation of caspase 3 and caspase 8, DNA fragmentation as well as cell membrane scrambling. The effects were dependent on the presence of ASM and were lacking in ASM^?/? mice or in wild‐type DCs treated with sphingomyelinase inhibitor amitriptyline. Conclusion : Thymol triggers suicidal DC death, an effect mediated by and requiring activation of ASM.     

Chemical characterization of 21 species of marine macroalgae common in Norwegian waters: benefits of and limitations to their potential use in food and feed

BACKGROUND

In the past few years, much effort has been invested into developing a new blue economy based on harvesting, cultivating and processing marine macroalgae in Norway. Macroalgae have high potential for a wide range of applications, e.g. as source of pharmaceuticals, production of biofuels or as food and feed. However, data on the chemical composition of macroalgae from Norwegian waters are scant. This study was designed to characterize the chemical composition of 21 algal species. Both macro‐ and micronutrients were analysed. Concentrations of heavy metals and the metalloid arsenic in the algae were also quantified.

RESULTS

The results confirm that marine macroalgae contain nutrients which are relevant for both human and animal nutrition, the concentrations whereof are highly dependent on species. Although heavy metals and arsenic were detected in the algae studied, concentrations were mostly below maximum allowed levels set by food and feed legislation in the EU.

CONCLUSION

This study provides chemical data on a wide range of algal species covering the three taxonomic groups (brown, red and green algae) and discusses both benefits of and potential limitations to their use for food and feed purposes. © 2017 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Validation of the performance of a GMO multiplex screening assay based on microarray detection

A new screening method for the detection and identification of GMO, based on the use of multiplex PCR followed by microarray, has been developed and is presented. The technology is based on the identification of quite ubiquitous GMO genetic target elements first amplified by PCR, followed by direct hybridisation of the amplicons on a predefined microarray (DualChip^® GMO, Eppendorf, Germany). The validation was performed within the framework of a European project (Co-Extra, contract no 007158) and in collaboration with 12 laboratories specialised in GMO detection. The present study reports the strategy and the results of an ISO complying validation of the method carried out through an inter-laboratory study. Sets of blind samples were provided consisting of DNA reference materials covering all the elements detectable by specific probes present on the array. The GMO concentrations varied from 1% down to 0.045%. In addition, a mixture of two GMO events (0.1% RRS diluted in 100% TOPAS19/2) was incorporated in the study to test the robustness of the assay in extreme conditions. Data were processed according to ISO 5725 standard. The method was evaluated with predefined performance criteria with respect to the EC CRL method acceptance criteria. The overall method performance met the acceptance criteria; in particular, the results showed that the method is suitable for the detection of the different target elements at 0.1% concentration of GMO with a 95% accuracy rate. This collaborative trial showed that the method can be considered as fit for the purpose of screening with respect to its intra- and inter-laboratory accuracy. The results demonstrated the validity of combining multiplex PCR with array detection as provided by the DualChip^® GMO (Eppendorf, Germany) for the screening of GMO. The results showed that the technology is robust, practical and suitable as a screening tool.