TESLA: an extended study of an energy-saving agent that leverages schedule flexibility

This paper presents transformative energy-saving schedule-leveraging agent (TESLA), an agent for optimizing energy usage in commercial buildings. TESLA’s key insight is that adding flexibility to event/meeting schedules can lead to significant energy savings. This paper provides four key contributions: (i) online scheduling algorithms, which are at the heart of TESLA, to solve a stochastic mixed integer linear program for energy-efficient scheduling of incrementally/dynamically arriving meetings and events; (ii) an algorithm to effectively identify key meetings that lead to significant energy savings by adjusting their flexibility; (iii) an extensive analysis on energy savings achieved by TESLA; and (iv) surveys of real users which indicate that TESLA’s assumptions of user flexibility hold in practice. TESLA was evaluated on data gathered from over 110,000 meetings held at nine campus buildings during an 8-month period in 2011–2012 at the University of Southern California and Singapore Management University. These results and analysis show that, compared to the current systems, TESLA can substantially reduce overall energy consumption.     

Robust resource targeting in continuous and batch process

Clean Technologies and Environmental Policy - Water is considered a significant resource in process industries. It is essential for planners to target and optimize the use of water as an external...     

Evaluation and optimisation of receiver height in a compound parabolic collector with low acceptance angle

This research presents the method of finding an optimised location of a tubular receiver for a compound parabolic collector (CPC) with 6° acceptance angle. Due to low acceptance angle, reflected rays concentrate below the focus of a parabola. Graphical ray tracing (GRT) approach is implemented to execute the optical analysis with and without manufacturing error in the collector. It is performed on collector–receiver combinations by varying receiver height below the focus and they are compared on the basis of utilised area and projection ratios. The ideal cases of collector–receiver combinations which contribute high utilisation and projection ratio are selected and verified with the camera target method (CTM) performed on the actual set-up. It is built for water heater application to validate the results obtained from GRT and CTM. The thermal performance of CPC at various receiver heights is compared by thermal efficiency and therefore the optimum receiver height is concluded.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part I, Effect of Starting Powder

The effect of starting SiC powder (β-SiC or α-SiC), with simultaneous additions of Al₂O₃ and Y₂O₃, on the microstructural evolution of liquid-phase-sintered (LPS) SiC has been studied. When using α-SiC starting powder, the resulting microstructures contain hexagonal platelike α-SiC grains with an average aspect ratio of 1.4. This anisotropic coarsening is consistent with interface energy anisotropy in α-SiC. When using β-SiC starting powder, the β→α phase transformation induces additional anisotropy in the coarsening of platelike SiC grains. A strong correlation between the extent of β→α phase transformation, as determined using quantitative XRD analysis, and the average grain aspect ratio is observed, with the maximum average aspect ratio reaching 3.8. Based on these observations and additional SEM and TEM characterizations of the microstructures, a model for the growth of these high-aspect-ratio SiC grains is proposed.     

Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits

Airborne sand particles that deposit on thermal barrier coatings (TBCs) in gas-turbine engines melt and form calcium–magnesium–aluminosilicate (CMAS) glass, which attacks the TBCs. A new approach for mitigating CMAS attack on TBCs is presented, where up to 20 mol.% Al₂O₃ and 5 mol.% TiO₂ in the form of a solid solution is incorporated into Y₂O₃-stabilized ZrO₂ (YSZ) TBCs. The fabrication of such TBCs with engineered chemistries is made possible by the solution-precursor plasma spray (SPPS) process, which is uniquely suited for depositing coatings of metastable ceramics with extended solid-solubilities. Here, the TBC serves as a reservoir of Al and Ti solutes, which are incorporated into the molten CMAS glass that is in contact with the TBC. This results in the crystallization of the CMAS glass and the attendant arrest of the penetrating CMAS front. This approach could also be used to mitigate attack by other types of foreign deposits (salt, ash, and contaminants) on TBCs.     

消费者期望驱动数据转换设计的发展

Σ-△数据转换架构可以弥补流水线型和SAR架构的性能差距,将为新一代的高性能和低成本终端解决方案打开一道大门.     

Numerical study of compressible convective heat transfer with variations in all fluid properties

The effects of property variations in single-phase laminar forced micro-convection with constant wall heat flux boundary condition are investigated in this work. The fully-developed flow through micro-sized circular (axisymmetric) geometry is numerically studied using two-dimensional continuum-based conservation equations. The non-dimensional governing equations show significance of momentum transport in radial direction due to μ(T) variation and energy transport by fluid conduction due to k(T) variation. For the case of heated air, variation in C_p(T) and k(T) causes increase in Nu. This is owing to: (i) reduction in T_w, (T_w ? T_m), and (?T/?r)_w and (ii) change in ?T_m/?z results in axial conduction along the flow. The effects of ρ(p,T) and μ(T) variation on convective-flow are indirect and lead to: (i) induce radial velocity which alters u(r) profile significantly and (ii) change in (?u/?r)_w along the flow. It is proposed that the deviation in convection with C_p(T), k(T) variation is significant through temperature field than ρ(p,T), μ(T) variation on velocity field. It is noted that Nu due to variation in properties differ from invariant properties (Nu = 48/11) for low subsonic flow.