T型三撑杆索穹顶预应力计算方法与参数分析

针对传统索穹顶构造形式单一及环向刚度弱的缺陷,提出一种T型三撑杆索穹顶.采用节点平衡法与求解超静定结构的位移法相结合的方法,推导出T型三撑杆索穹在考虑自重情况下结构初始预应力分布的计算公式;对索穹顶结构进行参数分析,讨论了矢跨比和撑杆高度对结构初始预应力分布的影响,给出了结构在忽略自重的情况下初始预应力计算表,得出了适用于T型三撑杆索穹顶结构的参数合理取值范围.研究表明,T型三撑杆索穹顶结构初始预应力与矢跨比、撑杆高度均成反比,撑杆高度的影响程度更大,该结构适宜矢跨比为1/20～3/20,适宜撑杆高度为斜索角度tan10°～tan20°时的取值.     

退役复学学生转专业动因分析及对策研究

深入探究退役复学学生的转专业动因,从中对退役复学学生转专业利弊加以分析,并对转专业过程中出现的问题提出应对之策。     

表面工程技术在导弹武器装备维修中的应用

本文主要介绍铝/F_(46),协合涂层新技术、复合电刷镀Ni—PTFE新工艺、DJB—823电接触保护剂及三防电子器件绝缘清漆在二炮导弹武器装备维修中的应用。     

城市街道分水口对洪水流态转换过程影响研究

随着城市化进程加快和全球气候变化加剧,城市洪涝灾害频发。研究城市街道的行洪特征,掌握城市建筑物对洪水流动的影响机理,对城市洪涝灾害治理具有重要的理论意义和应用价值。本文开展了城市建筑物对洪水运动影响的物理模型试验,在街道两侧布设分水口模拟建筑物不连续的分流效果,分析分水口位置及流量变化对洪水流态转化及水跃形态的影响。观测上游来流量变化、分水口位置等因素对洪水从急流向缓流过渡时的动力特征的影响,包括水跃发生位置、水跃形态转变、水跃漩滚长度、跃前和跃后水深比及分流比等。     

Toward Largely Enhanced Toughness and Balanced Strength in PA1012/EPDM Blends via Synergistic Effect of Sacrificial Bonds and Network Structure

Here, zinc-neutralized ethylene propylene diene monomer (EPDM) ionomers with different neutralization levels are prepared through melt blending, and are then incorporated with polyamide 1012 (PA1012) to fabricate PA1012/EPDM ionomer blends. Interestingly, complex crosslinking networks are formed in the blends due to the construction of sacrificial bonds (Zn²⁺-carboxyl, Zn²⁺-amide). The as-formed network structure and sacrificial bond endow the PA/EPDM blends with largely enhanced toughness (16 times higher than that of neat PA), as well as balanced strength and stiffness. Meanwhile, the rheological behaviors of PA1012/EPDM ionomer blends indicate their relative low melting viscosity, which can avoid the processing shortcomings of plastics toughened with rubber. Moreover, PA1012/EPDM ionomer blends show obvious gelation behavior, and a maximum notched Izod impact strength exhibited at the gel point, in which unique double network structure can be observed obviously, indicating that there is a corresponding correlation between the rheological and mechanical parameters. Furthermore, the supper-toughening mechanism of PA1012/EPDM ionomer blends at gel point is explored, which origins from the large deformation and cavitation of rubber particles and the destruction of special double network morphologies. This study provides a novel and effective strategy to fabricate PA materials with outstanding toughness and excellent strength simultaneously.     

Facile Fabrication of Povidone Iodine-Embedded Polytetrafluoroethylene Superhydrophobic Films with Improved Antiadhesive and Bactericidal Properties in Bacterial Environments

It remains a challenge to maintain the antiadhesion properties of superhydrophobic films after exposure to bacterial environments. In this work, superhydrophobic bactericidal polymer films via the simple incorporation of polyvinylpyrrolidone-iodine (PVP-I) or iodine into polytetrafluoroethylene (PTFE) are fabricated to improve their antiadhesive and antibacterial capability. Superhydrophobic iodine-embedded films, polytetrafluoroethylene/polyvinylpyrrolidone-iodine and polytetrafluoroethylene-iodine (PTFE/PVP-I and PTFE-I), show excellent antiadhesive and bactericidal performances even post exposure to bacterial solutions as compared to iodine-free counterparts by controlling the release of iodine. Especially, superhydrophobic PTFE/PVP-I films display a more sustained iodine release profile and significant antibacterial properties against gram-positive (S. aureus, methicillin-resistant S. aureus (MRSA)) and gram-negative (E. coli) bacteria. Such a facile combination of antiseptic agents and superhydrophobic surface could be widely used for antiseptic biomedical applications.     

气-电纺PHB引导组织再生膜的仿生矿化研究

实验将PHB通过气流-高压静电纺丝制成无纺膜，利用扫描电镜（SEM）、X射线衍射（XRD）对其形态和结构进行表征。在体外研究中，分别将无纺膜样本浸入37℃1．5倍仿生体液（SBF）中3、7、14、28d后对其表面形态和结构进行表征。结果表明，气电纺PHB无纺膜由超细纤维交织而成，纤维之间有多孔形成；通过气流一静电纺丝之后，PHB的结晶度及晶体的有序度降低；PHB膜在SBF中浸泡3天之后就有矿化结晶在纤维的表面形成，随着浸泡时间的增长，矿化结晶的数目增加，结晶度也随之增高，XRD及FTIR表明形成的结晶为含有碳酸根的磷灰石晶体。     

Extraction of Metal(Ti,V,Mo)-oxyl Cations by Monoacidic Phosphates and Phosphonates

The extraction of TiO~(2+),VO~(2+),VO_2~+ and MoO_2~(2+)by HDEHP,HEHEHP and HDTMPP was studiedrespectively.The orders of extraction ability for the three extractant systems are as follows:for TiO~(2+),VO~(2+):HDEHP>HEHEHP>HDTMPP;for VO_2~+, MoO_2~(2+):HDEHP< HEHEHP< HDTMPP.The experimental results were discussed from the point of view of extractant structures.     

基于ARM芯片$3C4510的步进电机加减速控制

在经济型数控机床中，步进电机的应用非常广泛，它具有简单易用等显著优点。但要想充分发挥它的优点就必须解决步进电机启动和停止时容易产生的失步和过冲的现象。本文选择高性能的ARM微处理器，采用不断修正定时器初值，从而改变定时中断脉冲频率的方法控制步进电机的启动和停止过程。取得了良好的控制效果，并给出了具体的计算公式和软件实现。     

浅谈流化床干燥器布风板的设计

介绍流化床干燥器所用各种形式布风板的结构。并对其使用情况作了分析。特别对高温布风板的形式进行了探讨。