高容量移动应用的NOR闪存和NAND闪存

高速数据传输网络和多媒体服务的大量部署使得具有更大的存储量成为新型手机和3G手机共有的要素。这些手机的存储量有望超过1Gb,而低端3G手机的存储能力将军少是32Mb。     

Mechanical Properties of Robust Ultrathin Silk Fibroin Films

Robust ultrathin multilayer films of silk fibroin were fabricated by spin coating and spin‐assisted layer‐by‐layer assembly and their mechanical properties were studied both in tensile and compression modes for the first time. The ultrathin films were characterized by a high elastic modulus of 6–8 GPa (after treatment with methanol) with the ultimate tensile strength reaching 100 MPa. The superior toughness is also many times higher than that usually observed for conventional polymer composites (328 kJ m^–3 for the silk material studied here versus typical values of < 100 kJ m^–3). These outstanding properties are suggested to be caused by the gradual development of the self‐reinforcing microstructure of highly crystalline β‐sheets, serving as reinforcing fillers and physical crosslinks, a process that is well known for bulk silk materials but it is demonstrated here to occur in ultrathin films as well, despite their limited dimensions. However, the confined state within films thinner than the lengths of the extended domains causes a significantly reduced elasticity which should be considered in the design of nanosized films from silk materials. Such regenerated silk fibroin films with outstanding mechanical strength have potential applications in microscale biodevices, biocompatible implants, and synthetic coatings for artificial skin.     

Biopolymer Nanoscale Assemblies as Building Blocks for New Materials: A Review

Biopolymers, a class of fascinating polymers from biomass provide sustainability, biodegradability, availability, biocompatibility, and unique properties. A ubiquitous feature of biopolymers is their hierarchical structure, with the presence of well-organized structures from the nanoscale to macroscopic dimensions. This structural organization endows biopolymers with toughness, defect resistance, and bucking adaptability. To retain these inherent structural features, nano-structural assemblies isolated from biomass have been applied as building blocks to construct new biopolymer-based materials. This top-down processing strategy is distinct from the more traditional molecular-level bottom-up design and assembly approach for new materials. In this review, the hierarchical structures of several representative biopolymers (cellulose, chitin, silk, collagen) are introduced with a focus on these nanoscale building blocks, as well as highlighting the similarities and differences in the respective chemistries and structures. Recent progress in production strategies of these natural building blocks are summarized, covering methods and treatments used for isolations. Finally, approaches and emerging applications of biopolymer-based materials using these natural nano- and meso-scale building blocks are demonstrated in areas of biomedicine, electronics, environmental, packaging, sensing, foods, and cosmetics.     

Integration of Stiff Graphene and Tough Silk for the Design and Fabrication of Versatile Electronic Materials

The production of structural and functional materials with enhanced mechanical properties through the integration of soft and hard components is a common approach to Nature's material design. However, directly mimicking these optimized design routes in the lab for practical applications remains challenging. For example, graphene and silk are two materials with complementary mechanical properties that feature ultrahigh stiffness and toughness, respectively. Yet, no simple and controllable approach is developed to homogeneously integrate these two components into functional composites, mainly due to the hydrophobicity and chemical inertness of graphene. In this study, well‐dispersed and highly stable graphene/silk fibroin (SF) suspension systems are developed, which are suitable for processing to fabricate polymorphic materials, such as films, fibers, and coatings. The obtained graphene/SF nanocomposites maintain the electronic advantages of graphene, and they also allow tailorable mechanical performance to form including ultrahigh stretchable (with a strain to failure to 611 ± 85%), or high strength (339 MPa) and high stiffness (7.4 GPa) material systems. More remarkably, the electrical resistances of these graphene/SF materials are sensitive to material deformation, body movement, as well as humidity and chemical environmental changes. These unique features promise their utility as wearable sensors, smart textiles, intelligent skins, and human–machine interfaces.     

A distributed control architecture of high-speed networks

A control architecture for a high-speed packet-switched network is described. The architecture was designed and implemented as part of the PARIS (subsequently plaNET and BBNS) networking project at IBM. This high bandwidth network for integrated communication (data, voice, video) is currently operational as a laboratory prototype. It will also be deployed within the AURORA Testbed that is part of the NSF/DARPA gigabit networking program. The high bandwidth dictates the need for specialized hardware to support faster packet handling for both point-to-point and multicast connections. A faster and more efficient network control is also required in order to support the increased number of connections and their changing requirements with time. The new network control architecture presented exploits specialized hardware, thereby enabling tasks to be performed faster and with less computation overhead. In particular, since control information can be distributed quickly using hardware packet handling mechanisms, decisions can be made based upon more complete and accurate information. In some respects, this has the effect of having the benefits of centralized control (e.g., easier bandwidth resource allocation to connections), while retaining the fault tolerance and scalability of a distributed architecture     

Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications

Three–dimensional, microperiodic scaffolds of regenerated silk fibroin have been fabricated for tissue engineering by direct ink writing. The ink, which consisted of silk fibroin solution from the Bombyx mori silkworm, was deposited in a layer‐by‐layer fashion through a fine nozzle to produce a 3D array of silk fibers of diameter 5 µm. The extruded fibers crystallized when deposited into a methanol‐rich reservoir, retaining a pore structure necessary for media transport. The rheological properties of the silk fibroin solutions were investigated and the crystallized silk fibers were characterized for structure and mechanical properties by infrared spectroscopy and nanoindentation, respectively. The scaffolds supported human bone marrow‐derived mesenchymal stem cell (hMSC) adhesion, and growth. Cells cultured under chondrogenic conditions on these scaffolds supported enhanced chondrogenic differentiation based on increased glucosaminoglycan production compared to standard pellet culture. Our results suggest that 3D silk fibroin scaffolds may find potential application as tissue engineering constructs due to the precise control of their scaffold architecture and their biocompatibility.     

High‐Strength,Durable All‐Silk Fibroin Hydrogels with Versatile Processability toward Multifunctional Applications

Hydrogels are the focus of extensive research due to their potential use in fields including biomedical, pharmaceutical, biosensors, and cosmetics. However, the general weak mechanical properties of hydrogels limit their utility. Here, pristine silk fibroin (SF) hydrogels with excellent mechanical properties are generated via a binary‐solvent‐induced conformation transition (BSICT) strategy. In this method, the conformational transition of SF is regulated by moderate binary solvent diffusion and SF/solvent interactions. β‐sheet formation serves as the physical crosslinks that connect disparate protein chains to form continuous 3D hydrogel networks, avoiding complex chemical and/or physical treatments. The Young's modulus of these new BSICT–SF hydrogels can reach up to 6.5 ± 0.2 MPa, tens to hundreds of times higher than that of conventional hydrogels (0.01–0.1 MPa). These new materials fill the “empty soft materials' space” in the elastic modulus/strain Ashby plot. More remarkably, the BSICT–SF hydrogels can be processed into different constructions through different polymer and/or metal‐based processing techniques, such as molding, laser cutting, and machining. Thus, these new hydrogel systems exhibit potential utility in many biomedical and engineering fields.     

Cell‐Tethered Ligands Modulate Bone Remodeling by Osteoblasts and Osteoclasts

The goals of the present study are to establish an in vitro co‐culture model of osteoblast and osteoclast function and to quantify the resulting bone remodeling. The bone is tissue engineered using well‐defined silk protein biomaterials in 2D and 3D formats in combination with human cells. Parathyroid hormone (PTH) and glucose‐dependent insulinotropic peptide (GIP) are selected because of their roles in bone remodeling for expression in tethered format on human mesenchymal stem cells (hMSCs). The cell‐modified biomaterial surfaces are reconstructed from scanning electron microscopy images into 3D models for quantitative measurement of surface characteristics. Increased calcium deposition and surface roughness are found in 3D surface models of silk protein films remodeled by co‐cultures containing tethered PTH, and decreased surface roughness is found for the films remodeled by tethered GIP co‐cultures. Increased surface roughness is not found in monocultures of hMSCs expressing tethered PTH, suggesting that osteoclast‐osteoblast interactions in the presence of PTH signaling are responsible for the increased mineralization. These data point towards the design of in vitro bone models in which osteoblast‐osteoclast interactions are mimicked for a better understanding of bone remodeling.     

Simulation of Cortical and Cancellous Bone to Accelerate Tissue Regeneration

Different tissues have complex anisotropic structures to support biological functions. Mimicking these complex structures in vitro remains a challenge in biomaterials designs. Here, inspired by different types of silk nanofibers, a composite materials strategy is pursued toward this challenge. A combination of fabrication methods is utilized to achieve separate control of amorphous and beta-sheet rich silk nanofibers in the same solution. Aqueous solutions containing two types of silk nanofibers are simultaneously treated with an electric field and with ethylene glycol diglycidyl ether (EGDE). Under these conditions, the beta-sheet rich silk nanofibers in the mixture responded to the electric field while the amorphous nanofibers are active in the crosslinking process with the EGDE. As a result, cryogels with anisotropic structures are prepared, including mimics for cortical- and cancellous-like bone biomaterials as a complex osteoinductive niche. In vitro studies revealed that mechanical cues of the cryogels induced osteodifferentiation of stem cells while the anisotropy inside the cryogels influenced immune reactions of macrophages. These bioactive cryogels also stimulated improved bone regeneration in vivo through modulation of inflammation, angiogenesis and osteogenesis responses, suggesting an effective strategy to develop bioactive matrices with complex anisotropic structures beneficial to tissue regeneration.