Coupling Analysis of GaAs-Based Microdisk Lasers With Different External Claddings

In this paper, we analyze the coupling of light from a GaAs microdisk laser into a waveguide. Starting from an air cladding, we examine several configurations to couple light into the waveguide with different cladding structures aimed to foster light coupling into the waveguide: photonic crystal and metallic (plasmonic cladding). In these coupling schemes, we tried to optimize the coupling of the emitted light into the waveguide, while maintaining a reasonable quality factor to allow the lasing operation of the device. We show that a plasmonic layer, introduced beside the waveguide can lead to a significant improvement in the coupling efficiency, reaching an efficiency close to 80%.     

Decay of material properties of degraded MEA caused by repeated cold starts under subzero conditions in polymer electrolyte fuel cells

This study investigated the characteristics of cell performance degradation, decline of component performance, and changes in the properties of membrane electrode assembly materials caused by repeated cold starts under a subzero condition of ?30 °C. It was made clear that functional decay appeared mainly at the cathode due to increased proton conductive impedance and reduction of reactivity of the electrode catalyst. Among the cathode components, an increase in proton conductive impedance in the cathode electrolyte was dominant. Furthermore, the application of ion chromatography and a newly developed proton‐induced gamma‐ray emission method to measure fluorine in the off‐gas drain revealed that decomposition of the electrolyte was dominant in the cathode catalyst layer. A decrease in fluorine in the cathode electrolyte measured by fluorine‐19 nuclear magnetic resonance confirmed this decomposition. A hypothesis is also presented concerning the cause of the performance degradation. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20394     

Template-free hydrothermal synthesis of hollow hematite microspheres

Hollow hematite (α-Fe₂O₃) microspheres with an average diameter of 3-4 μm and a shell thickness of approximate 150 nm was synthesized by a simple hydrothermal route using FeCl₃·6H₂O solution and acetic acid without using any templates. The hollow microspheres were composed of α-Fe₂O₃ nanoparticles with the diameter range from 20 to 40 nm. The effects of reaction parameters such as reaction time, temperature, concentration of FeCl₃·6H₂O solution, and initial pH on the morphology of the final products were investigated. A possible formation mechanism of hollow α-Fe₂O₃ microspheres was also proposed, where the acetic acid played a role of etching in the formation of hollow structure.     

Self-flux synthesis and photoluminescent properties of LiAl5O8

Pure-phase LiAl₅O₈ was selected as an oxide ceramic red phosphor material without dopants (color centers) and was synthesized using a self-flux method. The LiAl₅O₈ was formed by heating a powder mixture consisting of γ-Al₂O₃:Li₂SO₄ = 1:2 (molar ratio) at over 1100 °C for 1 h. Photoluminescence (PL) properties for the synthesized LiAl₅O₈ were investigated. The maximum intensity of the excitation spectrum for the photoluminescent emission of LiAl₅O₈ synthesized was at 274 nm. The peak intensity of the emission spectrum was at a wavelength of 667 nm (red color). The intensity of the peak emission spectrum increased with the heating temperature, i.e., the maximum peak intensity of the red emission spectrum was detected for the LiAl₅O₈ synthesized by heating at 1500 °C for 1 h.     

Electrochemical removal of p-nonylphenol from dilute solutions using a carbon fiber anode

p-Nonylphenol, which is widely used as raw material in industrial activities has been regarded as an environmental endocrine disrupter. In an effort to develop a new treatment method for p-nonylphenol, we initially investigated the electrochemical behavior of p-nonylphenol by voltammetric techniques. The electrochemical oxidation of p-nonylphenol led to the formation of electropolymerized film on the glassy carbon electrode surface. The fouling on the electrode surface by the electropolymerized film was evaluated by monitoring the electrode response of ferrocyanide ions as the redox marker. The electrochemical removal of p-nonylphenol based on the formation of the electropolymerized film on an anode surface was performed using a carbon fiber (CF) with a very large surface area. The high removal efficiency for p-nonylphenol was obtained by applying a potential at 0.7 V. The maximum surface coverage of electropolymerized p-nonylphenol on the CF was about 5 x 10(-9) mol/cm2. The presence of humic acid hardly inhibited the removal of p-nonylphenol. Furthermore, the application to the removal of phenol, o-chlorophenol, p-chlorophenol, 2,4-dichlorophenol, and 2,4,5-trichlorophenol was attempted by using this method.     

A reflective‐display QR‐LPD®

Abstract— A novel reflective display [Quick‐Response Liquid Powder Display (QR‐LPD®)], has been developed. This paper‐like display has the advantages of outstanding image stability, easy viewing, low‐power consumption, and a high‐response time. QR‐LPD® will be promoted, initially, for use as electronic price‐tag displays for merchandise. In addition, QR‐LPD® is suitable for flexible display applications because it does not require TFT arrays or a high‐temperature process while maintaining an excellent paper‐like image as well as glass‐type display compatibility.     

Molecular cloning and characterization of a novel bacteriophage-associated sialidase

Bacteriophage 63D, previously isolated from sewage, is associated with alpha-2,8-linked polysialic acid degrading activity. We cloned a DNA fragment containing the sialidase gene from a 63D phage genomic library and the enzyme was functionally expressed in Escherichia coli. Determination of the nucleotide sequence of the fragment revealed that it contained one open reading frame (ORF) coding for a 108-kDa polypeptide consisting of 984 amino acid residues. The fragment had promoter sequences similar to the E. coli consensus promoters for sigma70. The deduced amino acid sequence of the central region of the ORF showed homology to those of phages K1F (51.6% identity) and PK1E (51.7% identity) endosialidases. Two Asp-box motifs that are widely found in sialidases were conserved. Purification of the soluble enzyme from lysed culture broth of infected E. coli yielded a 90-kDa protein upon SDS polyacrylamide gel electrophoresis, suggesting that the primary translational product is processed to the mature 90-kDa protein. The molecular mass of the enzyme was determined as 360 kDa by gel filtration, indicating that the native enzyme was probably a tetramer of identical 90-kDa subunits.     

Fatal interstitial pulmonary disease in a patient with dyskeratosis congenita after allogeneic bone marrow transplantation

Local control rate by radical radiation therapy was analyzed in 33 patients with a piriform sinus cancer. Twenty-five patients (76%) were in stage T3 + T4. Local recurrence-free survival at 3 years was 49% in T1 + T2 and 25% in T3 + T4 (p = 0.01). In T1 + T2 lesions, a biologically effective dose for an acute reaction over 80 Gy and total treatment time less than 70 days appeared to improve local control. In T3 + T4 lesions, good radiation response assessed by the regaining of laryngeal mobility affected local control favorably. An esophageal involvement and destruction of the laryngeal cartilage as well as soft tissue extension precluded the possibility of local control by radiation therapy alone. In addition to the T-stage, other tumor factors should also be considered for predicting local control with radiation therapy.     

High-throughput of DNA sequencing by automated machines

I describe recent advance of DNA sequencing technology including automated machines. The human genome project, particularly large-scale DNA sequencing, forces us to handle numbers of samples simultaneously and rapidly. This lead us to develop new technologies. I herein introduce current progress of sequencing technologies and automated machines.