Fabrication of on-chip microcapillary using photosensitive glass

The on-chip microcapillary applying for electrophoresis analysis device has been fabricated on photosensitive glass. This process can make a high aspect-ratio channel structure. The channel-depth can be controlled by varying wet-etching time without widening the channel width because the substrate material has vertical high etch rate selectivity. This high aspect-ratio structure obtains a long optical path and appropriate sample volume resulting in high-sensitivity for various analyses. The fabrication process is simpler than a usual glass micromachining process because of photo-resistless lithography process. In order to smooth the channel surface and to attach a cover glass onto the substrate, a polysilazane coating process is proposed and revealed to be effective. We are indebted to Dr. N. Sawanobori (SUMITA OPTICAL GLASS, INC., Japan) for photosensitive glass and Dr. T. Ishikawa (TONEN CORPORATION, Japan) for polysilazane. They have given valuable advice for fabrication process in this study. This work was partially supported by the Grant-in-Aid for Science Research (No. 13450146) from the Japan Society for the Promotion of Science (JSPS).     

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Grazing exit electron probe microanalysis of submicrometer inclusions in metallic materials

Grazing exit electron probe microanalysis (GE-EPMA) is a new method of EPMA in which characteristic X-rays emitted from only near-surface regions of a specimen are detected at extremely low exit angles near 0 degrees (the grazing exit condition). This technique requires the analytical objects exist on a flat surface. Therefore, the GE-EPMA analysis has been used only for the analysis of particles or a thin film on a flat substrate so that there were only few applications for practical analysis. As a new application, we have carried out GE-EPMA analysis of approximately 0.2-microm inclusions on stainless steel, which appeared to be a projection on the specimen surface with chemical etching. The GE-EPMA quantitative results were in excellent agreement with those of inclusions that were extracted from the stainless steel and analyzed by EPMA with conventional exit condition (30 degrees). This method could be, therefore, applied to the analysis of the submicrometer inclusion in a wide variety of metallic materials if the inclusion appears to be a projection with chemical etching treatment.     

Bidirectional Data Injection Operation of Hybrid Integrated SOA–MZI All-Optical Wavelength Converter

A bidirectional data signal input scheme of a semiconductor optical amplifier--Mach-Zehnder interferometer (SOA-MZI) wavelength converter was proposed and experimentally verified for a nonreturn-to-zero (NRZ)-format signal. Theoretical analyses reveal that it is possible to mitigate the patterning effect induced by cross-gain modulation (XGM) by utilizing the difference of the ratio between the XGM and cross-phase modulation on the injection directions of data signals. A hybrid integrated SOA-MZI all-optical wavelength converter, in which the coupling loss between the SOA and the silica waveguide was as small as 1 dB owing to a unique active alignment technique, was used for the experiment. We have verified the superior characteristics of the proposed operation scheme for the first time. Error-free wavelength-conversion operation for an NRZ signal at 40 Gb/s was confirmed     

In-Plane Coupling of Light From InP-Based Photonic Crystal Band-Edge Lasers Into Single-Mode Waveguides

In this paper, we analyze the coupling of light from photonic-crystal band-edge lasers into single-mode waveguides. Both active and passive devices lie in the same plane and coupling of light is achieved by using parabolic and nanotapers in InP based epitaxial structures. Two- and three-dimensional finite-difference time-domain methods are employed to analyze these devices. Coupling efficiencies higher than 80% can be obtained with parabolic couplers. We also present laser configurations that can reduce multiwavelength coupling of light into single-mode waveguides, using structures that are similar to coupled cavity Fabry-Peacuterot lasers     

Color displays and flexible displays using quick‐response liquid‐powder technology for electronic paper

Abstract— Color displays and flexible displays that use electronic liquid powder have been developed. Novel types of color displays using either a colored powder or a color filter are discussed. We have also developed a flexible display with low‐cost substrate films with a high‐throughput roll‐to‐roll manufacturing method. These technologies enable a QR‐LPD to be widely used as an electronic‐paper display.     

BAAQ: an infrastructure for application integration and knowledge discovery in bioinformatics.

The emerging grid computing technologies enable bioinformatics scientists to conduct their researches in a virtual laboratory, in which they share public databases, computational tools as well as their analysis workflows. However, the development of grid applications is still a nightmare for general bioinformatics scientists, due to the lack of grid programming environments, standards and high-level services. Here, we present a system, which we named Bioinformatics: Ask Any Questions (BAAQ), to automate this development procedure as much as possible. BAAQ allows scientists to store and manage remote biological data and programs, to build analysis workflows that integrate these resources seamlessly, and to discover knowledge from available resources. This paper addresses two issues in building grid applications in bioinformatics: how to smoothly compose an analysis workflow using heterogeneous resources and how to efficiently discover and re-use available resources in the grid community. Correspondingly an intelligent grid programming environment and an active solution recommendation service are proposed. Finally, we present a case study applying BAAQ to a bioinformatics problem.     

Capillary rise properties of porous mullite ceramics prepared by an extrusion method with various diameters of fiber pore formers

Porous mullite ceramics with unidirectionally oriented pores were prepared by an extrusion method using rayon fibers as the pore formers. Rayon fibers of 8.1, 9.6, 16.8, and 37.6 μm in diameter were used as the pore formers and were kneaded with alumina powder, kaolin clay, China earthen clay, and water to form pastes. These pastes were extruded into cylindrical tubes, dried, and fired at 1500 °C for 4 h. The apparent porosities ranged from 45.7 to 48.2 %. The pore size distributions showed a sharp peak at 9.4, 10.0, 15.6, and 30 μm with increasing fiber diameters. The height of the capillary rise was 1780, 1670, 1320, and 950 mm with increasing fiber diameter. The maximum capillary rise is much higher than previously reported. The contact angle and effective pore radius that determine the capillary rise ability were calculated by fitting the capillary rise curves using the Fries and Dreyer’s equation.     

Local Dynamics of Adhesives in Aggressive Environment in the Pre-Damage Stage

Molecular aspects of chemical and physical changes in adhesive joints caused by absorbed moisture were investigated. The focus was on the pre-damage stage that precedes the formation of voids and microcracks. A model and a commercial epoxy-amine formulation were studied. Local dynamics were monitored by broad-band dielectric relaxation spectroscopy (DRS). One portion of the absorbed water does not form hydrogen bonds with the network and gives rise to a fast relaxation process (termed γ) with activation energy of 28 kJ/mol. The local β dynamics are slowed down by the interactions between water and various sites on the network that include the ether oxygen, the hydroxyl group and the tertiary amine nitrogen. One particularly significant finding is that the average relaxation time for the β process above 20°C is of the order of nanoseconds or less and, hence, the detection and monitoring of this process hinges upon the ability to perform high-precision DRS at frequencies above 1 MHz. This is an important consideration in the ongoing efforts aimed at the implementation of DRS as nondestructive inspection (NDI) tool for adhesive joints.