Strong correlations in two-dimensional quantum fluids of4He and3He adsorbed on hectorite

A theory for the high temperature superconductors is proposed. The dispersion of carriers in the 2D t-J model is calculated using numerical and analytical techniques, and compared with recent photoemission experimental results that reported a flat dispersion near the X and Y points. Good agreement is observed between theory and experiments. The density of states (DOS) of these dressed quasiparticles has a van Hove singularity. From the two carriers problem in an antiferromagnet, an effective Hamiltonian for holes is proposed. This effective model has superconductivity in the d_x ²–y² channel, a critical temperature T_c 100Kat the optimal hole density, x = 0.15, and a quasiparticle lifetime linearly dependent with energy. The appearance of an optimal concentration is a consequence of the van Hove singularity in the DOS. Other experimental results are also quantitatively reproduced by the theory. The present contribution is based on two recent papers by the authors (Phys. Rev. Lett.73, 728 (1994) and NHMFL preprint, July 1994).     

Indexing expensive functions for efficient multi-dimensional similarity search

Similarity search is important in information retrieval applications where objects are usually represented as vectors of high dimensionality. This leads to the increasing need for supporting the indexing of high-dimensional data. On the other hand, indexing structures based on space partitioning are powerless because of the well-known “curse of dimensionality”. Linear scan of the data with approximation is more efficient in the high-dimensional similarity search. However, approaches so far have concentrated on reducing I/O, and ignored the computation cost. For an expensive distance function such as L _p norm with fractional p, the computation cost becomes the bottleneck. We propose a new technique to address expensive distance functions by “indexing the function” by pre-computing some key values of the function once. Then, the values are used to develop the upper/lower bounds of the distance between a data vector and the query vector. The technique is extremely efficient since it avoids most of the distance function computations; moreover, it does not involve any extra secondary storage because no index is constructed and stored. The efficiency is confirmed by cost analysis, as well as experiments on synthetic and real data.     

Chemical and electrochemical preparation of poly(9,10-dihydrophenanthrene-2,7-diyl) using nickel complexes and electrochemical properties of the polymer

Summary Dehalogenation polycondensations of 2,7-dibromo-9,10-dihydrophenanthrene with isolated zero-valent nickel complex and electrochemically generated zero-valent nickel complex afford -conjugated poly(9,10-dihydrophenanthrene-2,7-diyl). The electrochemically synthesized polymer is obtained as a thin film on electrode, and shows a reversible electrochemically doping-undoping cycle in an oxidation region. The polymer has essentially the same -conjugation system as that of poly(p-phenylene).     

Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing

The authors and Hitachi Cable, Ltd. have recently developed small-diameter optical fiber and its fiber Bragg grating (FBG) sensor for embedment inside a lamina of composite laminates without strength reduction. The outside diameters of the cladding and polyimide coating are 40 and 52 μm, respectively. First, a brief summary is presented for applications of small-diameter FBG sensors to damage monitoring in composite structures. Then, we propose a new damage detection system for quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing. In this system, a piezo-ceramic actuator generates Lamb waves in a CFRP laminate. After the waves propagate in the laminate, transmitted waves are received by an FBG sensor attached on or embedded in the laminate using a newly developed high-speed optical wavelength interrogation system. This system was applied to detect interlaminar delamination in CFRP cross-ply laminates. When the Lamb waves passed through the delamination, the amplitude decreased and a new wave mode appeared. These phenomena could be well simulated using a finite element analysis. From the changes in the amplitude ratio and the arrival time of the new mode depending on the delamination length, it was found that this system could evaluate the delamination length quantitatively. Furthermore, small-diameter FBG sensors were embedded in a double-lap type coupon specimen, and the debonding progress could be evaluated using the wavelet transform.     

Behavior of a mechanically anchored waterproofing membrane system under wind suction and uniform Pressure

A pressure and wind tunnel test was conducted to obtain the basic data for wind resistance design of a mechanically anchored waterproofing membrane system. The test specimen was a flat roof with the following dimensions: 2.4 m in width, 3 m in length and 0.29 m in height. The waterproofing material was polyvinyl chloride sheet reinforced with polyester fiber (PVC sheets). In the pressure test, because the applied pressure was equivalent to the pressure on the entire surface area of the roof, the billowing heights of the PVC sheet around the fastener had almost the same maximum values; therefore, the axial force at the fastener was also similar to the pressure induced by a compressor, and no lateral forces were measured. On the other hand, in the wind tunnel test, the strain of the PVC sheet around the fastener at windward side was larger than that of the leeward side. The lateral force was 70% of the axial force at a mean wind speed of 38.6 m/s. Therefore, it was clear that the characteristics of the mechanically anchored waterproofing membrane system in the pressure test and the wind tunnel test were different.     

Alcohol dehydrogenases that catalyse methyl formate synthesis participate in formaldehyde detoxification in the methylotrophic yeast Candida boidinii

Methyl formate synthesis during growth on methanol by methylotrophic yeasts has been considered to play a role in formaldehyde detoxification. An enzyme that catalyses methyl formate synthesis was purified from methylotrophic yeasts, and was suggested to belong to a family of alcohol dehydrogenases (ADHs). In this study we report the gene cloning and gene disruption analysis of three ADH-encoding genes in the methylotrophic yeast Candida boidinii (CbADH1, CbADH2 and CbADH3) in order to clarify the physiological role of methyl formate synthesis. From the primary structures of these three genes, CbAdh1 was shown to be cytosolic and CbAdh2 and CbAdh3 were mitochondrial enzymes. Gene products of CbADH1, CbADH2 and CbADH3 expressed in Escherichia coli showed both ADH- and methyl formate-synthesizing activities. The results of gene-disruption analyses suggested that methyl formate synthesis was mainly catalysed by a cytosolic ADH (CbAdh1), and this enzyme contributed to formaldehyde detoxification through glutathione-independent formaldehyde oxidation during growth on methanol by methylotrophic yeasts.     

Probability distributions of gas hydrate formation

Induction time distributions for gas hydrate formation were measured for gas mixtures of methane + propane at pressures up to 11.3 MPa using a high‐pressure automated lag time apparatus (HP‐ALTA). Measurements were made at subcooling temperatures between 4.3 and 13.5 K and, while isothermal induction times between 0 and 15,000 s were observed, the median isothermal induction times for the distributions ranged from 100 to 4000 s. A hyperbolic relationship between median induction time and subcooling was used to correlate the data. A graphical interpretation is presented that relates the two types of data that can be acquired by using the HP‐ALTA in one of two modes to study hydrate formation: induction time distributions at constant subcooling and formation temperature distributions observed during linear cooling ramps. The equivalence of these two modes provides a robust method for studying the variation of formation phenomena in different hydrate systems. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2640–2646, 2013     

天津以及周边近代化遗产的思考

小序2006年9月我们从日本来到天津大学任教,我们在天津工作的主要目标是:(1)成立文化遗产的保护研究中心;(2)参与中国的文化遗产保护研究和规划设计;(3)从事文化遗产学的教学。我们关注传统建筑的保护研究,同时也深感近代遗产研究是一个薄弱环节。     

从北洋水师大沽船坞保护到天津滨海新区总体规划

北洋水师大沽船坞100年前曾经在直隶创造了中国近代工业的先驱性业绩,如今对这个遗址的保护集中反映了现阶段中国对工业遗产的认识和保护情况。此外,在塘沽海河沿岸还分布着28个不同等级的文物,如何从滨海新区总体规划的角度考虑文化遗产群是值得深思的问题。文章首先记录了大沽船坞的保护过程,分析保护第一线的若干特征;其次,将文物调查数据和中心商务区进行比较,指出文物所在地和中心商务区高度重合的问题;第三,分析以往塘沽总体规划的历程和滨海新区文化定位的重要性。文章的结论是,在世界创意城市的背景下,不仅应该考虑城市的经济定位,更应该从建设之初就考虑其文化定位。     

Internal-external transition for the oxidation of Fe-Cr-Ni austenitic stainless steels in steam

Several Fe-Cr-Ni austenitic stainless steels (Cr wt.%: 13–25, Ni wt.%: 15) were oxidized in steam for 1000 hr at 500–900°C. The oxide scales were examined and categorized with respect to the chromium concentration and the grain size of the base metal. Experiments showed three conditions for the critical bulk Cr concentration and the oxidation temperature at which the oxidation behavior changed drastically. Metallographic examination showed that two of these three conditions resulted from the internal-external transition of Cr₂O₃ either on the metal surface or along the grain boundaries of the base metal. Attempts were made to interpret these conditions from the available oxidation theories. Atkinson's treatment was employed with some modification to incorporate the grain-boundary diffusion of Cr in the base metal. The calculation basically explained the internal-external transition for the oxidation of these steels.