Response analysis for identifying the origin of photo-modulated current contrasts in scanning tunneling microscopic imaging semiconductor surfaces

Inhomogeneities in semiconductor solids can be imaged by two-dimensional mapping of the amplitude of periodically modulated tip current in scanning tunneling microscopy that is induced by illumination of semiconductor samples with a chopped light. It has been shown that it is possible to distinguish between plural origins of the photo-modulated current by analyzing the response properties of the current signal. A judicial choice of the modulation frequency is important for the required contrasts to be obtained.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Effect of radial curvature of magnetic media on glide avalanche

Spacing loss due to micro-waviness and curvature effects in the radial direction of a disk was investigated via numerical simulations and measurements. New techniques based on interferometry and laser scanning were employed to measure radius of curvature (ROC) and to reconstruct the profiles at the outer edge of a disk. A good correlation between ROC values and fly height degradation was obtained, and ROC less than 50 m clearly showed the deterioration in fly height by as much as 1.5 nm. The new measurement techniques proved to be an important means to improve substrate manufacturing processes.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Constant-gap spectrometer design for the electron/ion collider ELISe

For the study of electron-scattering off radioactive nuclei, the ELISe spectrometer will be constructed as a part of the Facility of Antiprotons and Ion Research (FAIR) in Darmstadt. A conceptional design of a spectrometer with a “clam-shell” gap was presented before. Here, we will present an improved design with a pre-deflector with a constant gap. Such a pre-deflector is not only simpler to construct but also provides larger angle acceptances in the forward-angle range compared to those with the “clam-shell” design.     

Highly photostable distributed-feedback polymer waveguide blue laser using spirobifluorene derivatives

In this study, we synthesized the new spirobifluorene derivatives; hexylbiphenyl-spirobifluorene (HBP-Spiro) and triphenylamine-spirobifluorene (TPA-Spiro) and demonstrated the operation of a distributed-feedback polymer waveguide blue laser. In addition, we investigated the optical and lasing properties of spirobifluorene derivatives including photostability. The experimental slope efficiency and the energy threshold of a HBP-Spiro-doped waveguide laser were 3.6% and 1.9 μJ, respectively. An operation lifetime of 27,000 shots was obtained for a pump-pulse duration of 1.2 ns and energy of 3.0 μJ at a wavelength of 355 nm.     

Sparse LMS/F algorithms with application to adaptive system identification

Standard least mean square/fourth (LMS/F) is a classical adaptive algorithm that combined the advantages of both least mean square (LMS) and least mean fourth (LMF). The advantage of LMS is fast convergence speed while its shortcoming is suboptimal solution in low signal‐to‐noise ratio (SNR) environment. On the contrary, the advantage of LMF algorithm is robust in low SNR while its drawback is slow convergence speed in high SNR case. Many finite impulse response systems are modeled as sparse rather than traditionally dense. To take advantage of system sparsity, different sparse LMS algorithms with l_p‐LMS and l₀‐LMS have been proposed to improve adaptive identification performance. However, sparse LMS algorithms have the same drawback as standard LMS. Different from LMS filter, standard LMS/F filter can achieve better performance. Hence, the aim of this paper is to introduce sparse penalties to the LMS/F algorithm so that it can further improve identification performance. We propose two sparse LMS/F algorithms using two sparse constraints to improve adaptive identification performance. Two experiments are performed to show the effectiveness of the proposed algorithms by computer simulation. In the first experiment, the number of nonzero coefficients is changing, and the proposed algorithms can achieve better mean square deviation performance than sparse LMS algorithms. In the second experiment, the number of nonzero coefficient is fixed, and mean square deviation performance of sparse LMS/F algorithms is still better than that of sparse LMS algorithms. Copyright © 2013 John Wiley & Sons, Ltd.     

Selective enumeration of viable Enterobacteriaceae and Pseudomonas spp. in milk within 7 h by multicolor fluorescence in situ hybridization following microcolony formation

Rapid and simultaneous enumeration of viable Enterobacteriaceae and viable Pseudomonas spp. in milk was achieved by using multicolor fluorescence in situ hybridization (FISH) with oligonucleotide probes based on 16S ribosomal RNA (rRNA) sequences in combination with a microcolony growth method (multicolor microcolony-FISH; MMC-FISH). The procedure of MMC-FISH method is rather simple; that is milk clearing, filtration of cells, incubation, hybridization and enumeration. Enumeration of targeted bacteria in logarithmic growth phase, stationary phase, or in a starved state in milk by MMC-FISH required 5-7 h, while it took 1-3 days to test for Escherichia coli and Pseudomonas putida by the conventional culture method. The numbers of E. coli and P. putida in each phase or in a starved state in milk determined by MMC-FISH were almost the same or greater than the number of colony forming units determined by the plate counting method. The MMC-FISH allows rapid examination of contamination in milk by viable Enterobacteriaceae and Pseudomonas spp. with growth potential.