Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Stable and super‐low friction of amorphous carbon nitride coatings in nitrogen gas by using two‐step ball‐on‐disk friction test

Effect of running‐in process on friction behaviour of carbon nitride (CNx) coating in N₂ gas stream was investigated with a newly introduced two‐step ball‐on‐disk friction test, where the rubbed Si₃N₄ ball in the pre‐sliding (step 1) was replaced by a new CNx‐coated Si₃N₄ ball in the subsequent sliding stage under N₂ gas (step 2). The two‐step friction test is clarified to be a simple but effective technique for obtaining contact material combination of self‐mated CNx coatings and for achieving stable and low frictions of CNx coatings. Friction coefficients of CNx/CNx in N₂ gas stream decrease greatly from 0.07 without pre‐sliding to less than 0.025 in two‐step friction tests. The minimum friction coefficient of 0.004 was obtained by introducing 500 cycles of pre‐sliding in ambient air. These stable and low frictions are attributed to the generation of self‐mated CNx coatings and the formation of a lubricious layer on the disk surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Multicopy suppressors of the sly1 temperature-sensitive mutation in the ER-Golgi vesicular transport in Saccharomyces cerevisiae

Saccharomyces cerevisiae Sly1 protein is a member of the Sec1/Munc18-family proteins, which are essential for vesicular trafficking, but their exact biological roles are yet to be determined. A temperature-sensitive sly1 mutant arrests the vesicular transport from the ER to Golgi compartments at 37 degrees C. We screened for multicopy suppressor genes that restore the colony formation of the sly1(ts) mutant to discover functionally interacting components. The suppressor genes obtained were classified as: (1) those that encode a multifunctional suppressor, SSD1; (2) heat shock proteins, SSB1 and SSB2; (3) cell surface proteins, WSC1, WSC2 and MID2; (4) ER-Golgi transport proteins, USO1 and BET1; and (5) an as-yet-uncharacterized protein, HSD1 (high-copy suppressor of SLY1 defect 1). By epitope tagging of the gene product, we found that Hsd1 protein is an ER-resident membrane protein. Its overproduction induced enlargement of ER-like membrane structures.     

Structural Change of Maize Starch Granules by Ball-mill Treatment

Effect of ball-mill treatment on physical properties and molecular change of maize starch granule was investigated. Ball-mill treatment was done by rotary type mill, and species of maize starch are normal, waxy and high amylose (amylo). Running time of the treatment is 0–320 h. Starch granules loss smoothness on surface and became rough, even though their changing speed was different among the three species. But, they retained whole figure and size after 320 h treatment in the all cases. Amylase susceptivity and water absorption activity were measured. Structural change of starch components was compared among the three species with X-ray diffraction, DSC and GPC. High Performance An-ion Exchange Chromatography (HPAEC) pattern of debranched sample treated with ball-mill for 320 h showed that formation of very short chain in amylopectin is little. ¹³C solid-NMR spectra suggest that disruption of molecules of amylopectin and amylose with ball-mill might occur at their glycosidic linkage. However, very slight radical was observed by Electron Spin Resonance spectroscopy (ESR) in the case of 320 h sample.     

Phenanthrene-functionalized 3,6-dithiophen-2-yl-2,5- dihydropyrrolo[3,4-c]pyrrole-1,4-diones as donor molecules for solution-processed organic photovoltaic cells

3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione (DPP) based organic molecules and polymers have received strong attention as the donor materials of efficient organic photovoltaic cells (OPVs). This paper reports the synthesis and characterization of two DPP-based organic molecules functionalized with phenanthrene and ethynylphenanthrene and their application as the donor materials of solution-processed OPVs. They have band gaps of 1.6-1.8 eV and appropriate energy levels, and they can be soluble in common organic solvents such as chloroform and tetrahydrofuran. The C≡C triple bond in ethynylphenanthrene has a strong effect on the structure and properties of molecules. It increases the rigidity of molecule, decreases the solubility in organic solvents, and increases the crystallinity of the active layer and photovoltaic performance of the OPVs. The optimal photovoltaic efficiency of OPVs with ethynylphenanthrene-functionalized DPP is 1.71% under AM 1.5 G illumination (100 mW cm⁻²), more than double of that of the OPVs with phenanthrene-functionalized DPP.     

Study on the Effects of Flow in the Volute Casing on the Performance of a Sirocco Fan

The flow at the exit from the runner blade of a centrifugal fan with forward curved blades (a sirocco fan) sometimes separates and becomes unstable. We have conducted many researches on the impeller shape of a sirocco fan, proper inlet and exit blade angles were considered to obtain optimum performance. In this paper, the casing shape were decided by changing the circumferential angle, magnifying angle and the width, 21 sorts of casings were used. Performance tests, inner flow velocity and pressure distributions were measured as well. Computational fluid dynamic calculations were also made and compared with the experimental results. Finally, the most suitable casing shape for best performance is considered.     

Internal oxidation of Fe-Al alloys in the α-phase region

The internal oxidation behavior of Fe-0.069, 0.158, and 0.274 wt% Al alloys was investigated in the -phase region. The internal oxidation experiments have been made over the temperature range from 1023 to 1123 K using a mixture of iron and its oxide powders. A parabolic rate law holds in the present alloys, where the rate constant, K_p, depends upon the oxidation temperature as well as the aluminum content. The internal oxidation of Fe-Al alloys is, therefore, controlled by a diffusion process of oxygen in the alloy. The oxide formed in the oxidation layer is the stoichiometric FeAl₂O₄ (hercynite). The aluminum concentration, N _Al ^Io , in the oxidation layer was calculated by taking account of counterdiffusion of aluminum. Furthermore, the oxygen concentration, N _O ^S , at the specimen surface was evaluated on the basis of thermodynamics. Using these estimated values of K_p, N _Al ^IO , and N _O ^S , the diffusion coefficient of oxygen, D _O ^IO , in the oxidation layer, where the oxide particles were dispersed, was also calculated. D _O ^IO increases as the volume fraction of the oxide, f^IO, increases. The diffusion coefficient of oxygen, D_O, in -iron was determined by extrapolating D _O ^IO to f^IO=0.     

Effect of Contact Stiffness on Creep-Groan Occurrence on a Simple Caliper-Slider Experimental Model

In this paper, a fundamental mechanism for creep-groan generation is investigated by adopting a simple yet effective caliper-slider experimental model. Contact condition, which is a function of three parameters, namely normal force, contact roughness, and material combination, is connected with the creep-groan phenomenon in terms of contact stiffness. Creep-groan generation is determined by analyzing the frequency characteristic of the generated vibration acceleration when the sliding commences due to a simultaneous application and release of force in the tangential and normal directions, respectively. As per the obtained results, creep-groan occurrence or absence in the employed experimental model may be classified into three regions based upon the value of the contact stiffness, i.e., occurrence, non-occurrence, and mixed regions. The results also indicate that creep-groan occurrence in this caliper-slider experimental model can be avoided by controlling the value of contact stiffness in an effective manner.     

Mechanical stress effect on oxygen ion mobility in 8 mol% yttria-stabilized zirconia electrolyte

In the present study, the effect of mechanical tensile stress on oxygen mobility in 8 mol% yttria-stabilized zirconia (8YSZ) was investigated. The experimental results show that the ionic conductivity increases with stress and saturates. The maximum improvement in the conductivity was about 18% observed at 973 K. The simulation results show that the diffusion coefficient increases with stress and decreases with excessive stress. The maximum improvement was about 40% observed at 973 K. The improvement was larger at lower temperatures in both the experiment and the simulation. The strain caused by the stress is considered to have caused the gradient in the potential energies of the neighbouring oxygen sites, especially around the yttrium ions, which probably facilitated the migration of the oxygen ions.