Modeling of reverse osmosis flux of aqueous solution containing glucose

The aim of the paper is to model the permeate flux during reverse osmosis (RO) of a highly concentrated glucose solution using the osmotic pressure model. Such a model accounts for the effect of the concentration polarization phenomenon on the permeate flux. To apply this model the viscosity, the osmotic pressure of solution and the diffusion coefficient of glucose were estimated. Using mathematical simulation software, the values of mass transfer coefficient for different concentrations of glucose (5, 10, 15 and 20 wt%) and at different feed flow rate were determined. The experimental permeate flux values conducted on flat RO membranes (Type HR-99) agreed well with the values calculated by the osmotic pressure model, as shown by statistical analysis.     

Selective Raman Scattering Detection of the Dirac Node and the Anti-node of the Spin Density Wave Gap and Magnetic Excitations in BaFe2As2

The electronic and magnetic excitations at the spin density wave (SDW) transition are investigated by Raman scattering. The multi-orbital electronic states induce the Dirac nodes in the SDW gap. The excitations near the nodes and anti-nodes are separately detected in accordance with the two-orbital tight-binding model. The exchange interactions are found to be given by the second derivative of the total energy with respect to the angle of the moment from two-magnon scattering. The two-magnon peak has the large spectral weight above twice the maximum energy of magnon. It is interpreted by the magnetic self-energy of the electron spectral function in the localized spin model or particle-hole excitations in the itinerant spin model.     

Catalyst‐Free GaN Nanorods Synthesized by Selective Area Growth

GaN nanorod formation on Ga‐polar GaN by continuous mode metalorganic chemical vapor deposition selective area growth (MOCVD SAG) is achieved under a relatively Ga‐rich condition. The Ga‐rich condition, provided by applying a very low V/III ratio, alters the growth rates of various planes of the defined nanostructure by increasing relative growth rate of the semi‐polar tilted m‐plane {1–101} that usually is the slowest growing plane under continuous growth conditions. This increased growth rate relative to the non‐polar m‐plane {1–100} and even the c‐plane (0001), permits the formation of GaN nanorods with nonpolar sidewalls. In addition, a new growth mode, called the NH₃‐pulsed mode, is introduced, utilizing the advantages of both the continuous mode and the lower growth rate pulsed mode to form nanorods. Finally, nanorods grown under the different growth modes are compared and discussed.     

Conversion of aqueous extracts from thermochemical treatment of bagasse into functional emulsifiers

Synthetic emulsifiers in food industries are being replaced with a customer-friendly food ingredient that is derived from biomass using sustainable green technologies. After hydrothermal liquefaction treatment, raw bagasse (21%), pith (26%), and rind portions (25%) were obtained with reduced ash contents. As aqueous extracts, with oligosaccharides and lignin residues, it was used in the preparation of oil-in-water emulsions with 5% soybean oil. Results showed that the emulsions stabilised the oil droplets with particle size between 11 and 17 µm by steric repulsion with raw bagasse-stabilised emulsion showing a better stability at 25 °C (31 days). It was demonstrated that raw bagasse extracts, without alteration, maybe a potential unconventional source for food-grade emulsifiers by integrating a versatile thermochemical conversion of waste without the use of chemicals.     

Development and field test of the articulated mobile robot T2 Snake-4 for plant disaster prevention

Abstract

In this work, we develop an articulated mobile robot that can move in narrow spaces, climb stairs, gather information, and operate valves for plant disaster prevention. The robot can adopt a tall position using a folding arm and gather information using sensors mounted on the arm. In addition, this paper presents a stair climbing method using a single backward wave. This method enables the robot to climb stairs that have a short tread. The developed robot system is tested in a field test at the World Robot Summit 2018, and the lessons learned in the field test are discussed.     

Quantitative Magneto-Optical Imaging of Supercurrents in Heavy-Ion Irradiated Cuprate and Pnictide Superconductors

Spatial distributions of magnetic field and of current density in superconductors are obtained, in real-time, by the magneto-optical imaging technique with an indicator film. Quantitative values of the local magnetic field and then of the local current density were achieved by a careful optical calibration and custom algorithms for the inversion of Biot–Savart law. An iterative procedure was developed for the correction of artifacts due to the coupling of the indicator film magnetization with the in-plane magnetic field generated by the superconducting sample. This technique is highly valuable when the sample under study has nonuniform properties. Several cases of such systems are shown. Particular attention is devoted to the local variation of structural and chemical properties by means of heavy-ion irradiation. A comparative study of swift-ion irradiation effects between cuprate and pnictide superconductors is addressed. For the case of cuprate materials, some successful applications of the heavy ion irradiation engineering are presented and discussed.     

Introduction of sulfhydryl groups and disulfide linkage to mungbean 8Sα globulin and effects on physicochemical and functional properties

Sulfhydryl groups and disulfide bond were introduced in mungbean's major storage protein, 8Sα globulin, by protein engineering to improve structural stability and functional properties. Five modified proteins or mutants (F59C, I99C, A213C, one free sulfhydryl group; I99C/A213, one disulfide bridge; F59C/I99C/A213C, one free sulfhydryl group and one disulfide linkage) were expressed in Escherichia coli at a yield similar to that of the unmodified protein or wild type (WT) in soluble form (38%). The number of introduced groups in the mutants was confirmed by Ellman analysis. Mutant and WT proteins exhibited similar elution patterns on gel filtration indicating their trimeric native conformation. Mutants had 2 to 3.8 °C higher T_m values than WT and were digested by chymotrypsin at 52–58% in 60 min but exhibited different digestion patterns. All mutants showed greater hardness of heat-induced gels than WT, especially I99C/A213C and F59C/I99C/A213C. Results indicate the improved structural stability of the modified 8Sα globulin.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.