Suitability of Different Food Grade Materials for the Encapsulation of Some Functional Foods Well Reported for Their Advantages and Susceptibility

Functional foods find a very important place in the modern era, where different types of cancer, diabetes, cardiovascular diseases, etc. are on a high. Irrespective of the abundance of bioactive components in different fruits and vegetables, their low solubility in aqueous solution, vulnerability to destruction in different environmental and gastrointestinal conditions and a low intestinal absorption becomes a concern. Because it is quite difficult to commercialize non food materials for the food encapsulation purposes due to their safety concerns in the human body, scientists in the recent times have come up with the idea of encapsulating the different bioactive components in different food grade materials that are able to safeguard these bioactive components against the different environmental and gastrointestinal conditions and ensure their safe and targeted delivery at their absorption sites. Different food grade encapsulation materials including various oligosaccharides, polysaccharides (starch, cyclodextrins, alginates, chitosan, gum arabic, and carboxymethyl cellulose) and proteins and their suitability for encapsulating various bioactive components like flavonoids (catechins, rutin, curcumin, hesperetin, and vanillin), nonflavonoids (resveratrol), carotenoids (β-carotene, lycopene, and lutein), and fatty acids (fish oil, flaxseed oil, and olive oil) of high medical and nutritional value are reviewed here.     

Physicochemical stability of antilisterial proteins from P. polymyxa Kp10 as potential food biopreservative

Listeria monocytogenes has continuously become a significant threat to consumers worldwide. The use of chemical-derived preservatives that are commonly associated with safety and nutritional issues has prompted the use of natural-based preservatives as a better alternative. Many bacterial strains including Paenibacillus polymyxa Kp10 have been reported to produce various antimicrobial proteins and compounds that are considered more natural. However, their stability in various physicochemical conditions should be examined before being applied in various types of food. In this study, the stability of four previously identified antilisterial proteins in P. polymyxa Kp10 upon exposure to several physicochemical conditions was examined. More than 80% residual antilisterial activity is conserved upon heat and proteinase K treatment. But, sensitivity to 24 h trypsin digestion has been observed. P1 and P2 proteins (histone-like DNA binding proteins HU) were sensitive to alkaline pH (pH 10-12) as compared with other proteins. More than 70% and 97% residual antilisterial activity were recovered after incubation in raw beef homogenates and simulated meat gravy model, respectively. However, the antilisterial activity of most proteins was highly compromised in chicken and salmon meat homogenates, and UHT cow milk. Inoculation of these proteins into Listeria-contaminated simulated meat gravy showed that all proteins exerted a bactericidal action against L. monocytogenes. P1 and P2 shared almost similar antilisterial activity rates, while P4 was the most potent antilisterial protein. The findings in this study could provide important preliminary data for future applications of these proteins as preservative in food products especially beef-based meat products.     

Wear characteristics of commercial gas turbine components

Wear is one of the common degradations in a commercial gas turbine. A stainless steel grade 304 (SS 304) fuel nozzle and its collar made of nickel-based superalloy (Hastelloy X) are two vital components that normally suffer from rapid wear. During an installation, the fuel nozzle is slotted into the collar of the combustion liner. In operation, these two surfaces are subjected to high pressure from the fuel combustion, hence continuously rubbing against each other causes vibrations. During the start–stop operation, these surfaces had undergone a large relative motion. The vibration is the main cause of the wear occurrence on the surfaces. Physical properties of the worn surfaces were obtained through visual observations: wear measurement, hardness and microstructure examination. Through visual observations, fretting wear was mainly suspected as the dominant wear mode, particularly after 8,000 of running hours at high temperature and vibration. In short, this paper discusses the preliminary findings of wear on the fuel nozzle and its collar. It also discusses the changes in the mechanical properties before and after the operation. Solutions for mitigating the problem were discussed.     

转速对6061-T6铝合金搅拌摩擦搭接焊接头力学性能的影响(英文)

采用场发射扫描电子显微镜(FE-SEM),研究转速对厚度为5 mm的6061-T6铝合金搅拌摩擦搭接焊接头的宏观和微观组织、硬度、搭接头剪切性能和失效模式的影响。结果表明:在最低的转速度下,上模板和下模板具有十分相似的硬度分布。采用EDX分析发现,焊核区的断裂面中含有Fe的化合物。     

硅烷涂层对316L不锈钢耐腐蚀性能的影响

目的提高316L不锈钢的耐腐蚀性能。方法在316L不锈钢样品表面涂覆主要成分为1,2-二(三乙氧基硅基)乙烷(BTSE)的硅烷涂层。通过电化学分析测试,评价涂覆硅烷涂层的316L不锈钢的耐蚀性,并通过扫描电子显微镜和扫描电化学显微镜对其表面形貌进行分析。结果在相同的腐蚀环境下,与未涂覆硅烷涂层的316L不锈钢样品相比,涂覆硅烷涂层样品的表面更加光滑,点蚀现象明显好转。电化学测试结果显示,涂覆硅烷涂层的316L不锈钢样品的腐蚀电位为?565.02m V,未涂覆硅烷涂层样品的腐蚀电位为?796.01 mV,前者明显高于后者,其腐蚀倾向明显减小。另外,涂覆硅烷涂层的316L不锈钢样品的腐蚀电流为2.5177μA,未涂覆硅烷涂层样品的腐蚀电流为5.4291μA,涂覆硅烷涂层样品的腐蚀电流明显更小,表现出了更好的耐腐蚀性能。通过观察扫描电化学显微镜图像可以得出,未涂覆硅烷涂层的316L不锈钢样品的电流范围为?3.144×10?9～?1.957×10?9 A,涂覆硅烷涂层的316L不锈钢样品的电流范围为?3.004×10?9～?1.975×10?9A,涂覆硅烷涂层样品的电流范围更窄,腐蚀程度明显减轻。结论在316L不锈钢表面涂覆硅烷涂层可以在一定程度上减缓样品的腐蚀程度,硅烷涂层起到了物理屏障的作用,显着提高了316L不锈钢的耐腐蚀性。     

Modification of oil palm empty fruit bunches with maleic anhydride: The effect on the tensile and dimensional stability properties of empty fruit bunch/polypropylene composites

Oil palm empty fruit bunch (EFB)‐filled polypropylene (PP) composites were produced. The EFB filler was chemically modified with maleic anhydride (MAH). The effects of the filler size and chemical modification of EFBs on the tensile and dimensional stability properties of EFB–PP composites were studied. The composites with MAH‐treated EFBs showed higher tensile strengths than those with untreated EFBs. This was attributed to the enhanced compatibility between the MAH‐treated EFBs and PP matrix, as shown in a scanning electron microscopy study. Fourier transform infrared analysis showed evidence of C?C and C?O bonds from MAH at 1630 and 1730 cm^?1, respectively. The MAH‐treated PP composites showed lower water absorption and thickness swelling than those with untreated EFBs. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 827–835, 2003     

Dual-Function Semaphorin 4D Released by Platelets: Suppression of Osteoblastogenesis and Promotion of Osteoclastogenesis

Effects of the antiosteoblastogenesis factor Semaphorin 4D (Sema4D), expressed by thrombin-activated platelets (TPs), on osteoblastogenesis, as well as osteoclastogenesis, were investigated in vitro. Intact platelets released both Sema4D and IGF-1. However, in response to stimulation with thrombin, platelets upregulated the release of Sema4D, but not IGF-1. Anti-Sema4D-neutralizing monoclonal antibody (mAb) upregulated TP-mediated osteoblastogenesis in MC3T3-E1 osteoblast precursors. MC3T3-E1 cells exposed to TPs induced phosphorylation of Akt and ERK further upregulated by the addition of anti-sema4D-mAb, suggesting the suppressive effects of TP-expressing Sema4D on osteoblastogenesis. On the other hand, TPs promoted RANKL-mediated osteoclastogenesis in the primary culture of bone-marrow-derived mononuclear cells (BMMCs). Among the known three receptors of Sema4D, including Plexin B1, Plexin B2 and CD72, little Plexin B2 was detected, and no Plexin B1 was detected, but a high level of CD72 mRNA was detected in RANKL-stimulated BMMCs by qPCR. Both anti-Sema4D-mAb and anti-CD72-mAb suppressed RANKL-induced osteoclast formation and bone resorptive activity, suggesting that Sema4D released by TPs promotes osteoclastogenesis via ligation to a CD72 receptor. This study demonstrated that Sema4D released by TPs suppresses osteogenic activity and promotes osteoclastogenesis, suggesting the novel property of platelets in bone-remodeling processes.     

Mechanical,flow, and morphological properties of talc‐ and kaolin‐filled polypropylene hybrid composites

Polypropylene (PP) hybrid composites have been produced by compounding two types of mineral fillers, viz., talc and kaolin with PP copolymer using a twin screw extruder. The PP hybrid composite was injection‐molded into dumbbell specimen for tensile, flexural, and impact properties characterizations. MFI and SEM studies were used to characterize the flow and morphological properties of the PP hybrid composites. The result shows that most of the hybrid composites showed a significant decrease in flow, tensile, flexural, and impact properties compared with the single filler‐filled PP composites. However, a hybridization effect was seen for the PPT20K10 hybrid composites, through the synergistic coalescence of positive characteristics from 20 wt % of talc and 10 wt % of kaolin. This hybrid formulation have given an economically advantageous material with the mechanical properties (tensile, flexural, and impact) comparable to those of the talc‐filled PP composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 434–441, 2007     

The effect of structural features on mechanical properties of loose optical fiber poly(butylene terephthalate) tubes

Results of a study on the modifying mechanical properties of loose optical‐fiber poly(butylene terephthalate) (PBT) tubes, produced during the standard industrial extrusion process, show that heat treatment make the structure of their material to change. The study comprised measurements of mechanical strengths properties of the tubes (tensile strength, compression strength, kinking) and determination of tube material structure [by differential thermal analysis (DTA), wide angle X‐ray scattering analysis (WAXD), and scanning electron microscopy (SEM)]. Results of the study allowed observation that the annealing at 70°C for 34 h of the tubes caused the crystalline α phase to increase in the tube material from ～28.5% to ～31.5% and the structure of the existing crystallites to become more perfect. This made the values of certain mechanical properties of the tubes to increase even by as much as 30%. The tubes following such thermal treatment could be used in cables exposed to heavy‐duty operation in arduous environments, where a larger margin from the standpoint of mechanical properties is required. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2130–2134, 2002