Sepiolite hybridized commercial fillers,and their effects on curing process,mechanical properties,thermal stability,and flammability of ethylene propylene diene monomer rubber composites

Ethylene propylene diene monomer rubber (EPDM)-based composites containing sepiolite (sep) hybridized with calcium carbonate (CaCO₃), silica (Sil) or carbon black (CB) were prepared on a two-roll mill. The influence of fillers’ contents on the curing, mechanical, thermal and flammability of the composites was investigated. In comparison with EPDM/sep at 30 parts per hundred rubbers (phr) as a control composite, EPDM/sep/CB composites exhibited an outstanding improvement in tensile strength followed by EPDM/sep/Sil and EPDM/sep/CaCO₃ composites. EPDM/sep/CB displayed the highest thermal stability and also improved flammability resistance. In addition, a higher amount of carbon black gave higher tensile strength. The results were influenced by the ability of CB to disperse well and form protective layers acting as mass transport barriers in the matrix. The field emission scanning electron microscopy analyses proved better dispersion of CB in the matrix. The presence of protective layers on the surface of samples consequently improved the thermal properties of the EPDM composites. The mechanism of formation of char protective layer in hybrid EPDM composites was also investigated based on morphological observations of char residues. According to this work, Sil and CB were able to hybrid with sep, while sep could be a potential substitution of CaCO₃ in the EPDM composites.     

Easily made and handled carbon nanocones for scanning tunneling microscopy and electroanalysis

Well-formed carbon nanocones at the ends of micrometer-diameter carbon fibers (CFs) were fashioned into functional tips for scanning tunneling microscopy (STM) and miniaturized voltammetric sensors. Sharpening of single graphite filaments was achieved by simple DC electrochemical etching in 0.1 N NaOH. Operated as STM tips, pointed CFs resolved in air the contour and surface morphology of a nanoscopic Au line pattern and imaged in vacuum a Si (1 1 1) surface with clear atomic resolution. Subjecting already etched CFs to tip-sparing insulation with electrodeposited paint produced conical carbon ultramicroelectrodes (UMEs) with effective radii down to about 900 nm. Comparative cyclic voltammetry trials in alkaline, neutral and acidic solutions showed that the conical carbon UME’s had a wider practical potential window for electroanalytic applications than, for instance, Pt disk UMEs. The CF-based conical sensors described here are exceptionally easy to make with simple laboratory equipment and perform well in STM topography imaging and voltammetry. The inherent simplicity of sensor production widens the field of potential users, and offers clear advantages over existing types of UMEs, in particular those based on carbon nanotubes, which are especially hard to handle in an optical microscope setting.     

Geological Engineering,Civil Engineering,Traffic and Transportation Engineering Electrical capacitance volume tomography for measurement soil water infiltration in vessel experiments简

Electrical capacitance volume tomography （ECVT） is a recently-developed technique for real-time, non-invasive 3D monitoring of processes involving materials with strong contrasts in dielectric permittivity. This work is first application of the method to visualization of water flow in soil. We describe the principles behind the method, and then demonstrate its use with a simple laboratory infiltration experiment. 32 ECVT sensors were installed on the sides of an empty PVC column. Water was poured into the column at a constant rate, and ECVT data were collected every second. The column was then packed with dry sand and again supplied with water at a constant rate with data collected every second. Data were analyzed to give bulk average water contents, which proved consistent with the water supply rates. Data were also analyzed to give 3D images （216 voxels） allowing visualization of the water distribution during the experiments. Result of this work shows that water infiltration into the soil, wall flow, progress of the unstable wetting front and the final water distribution are clearly visible.     

Comparison of the mechanical properties and interfacial interactions between talc,kaolin, and calcium carbonate filled polypropylene composites

Three types of mineral fillers—talc, calcium carbonate (CaCO₃), and kaolin (10–40 wt % filler loadings)—were compounded with polypropylene (PP) with a twin‐screw extruder. The composites were injection‐molded, and the effects of the filler loading on the mechanical, flow, and thermal properties for the three different types of filled composites were investigated. The aim was to compare their properties and to deduce prospective filler combinations that would yield hybrid PP composites in following studies. The results showed that in most cases, the strength and stiffness of the talc‐filled PP composites was significantly higher than those of the CaCO₃‐ and kaolin‐filled PP composites. However, CaCO₃, being a nonreactive filler, increased the toughness of PP. The kaolin‐filled PP composites also showed some improvement in terms of strength and stiffness, although the increases in these properties were not as significant as those of the talc‐filled PP composites. The effects of interfacial interactions between the fillers and PP on the mechanical properties were also evaluated with semiempirical equations. The nucleating ability of all three fillers was studied with differential scanning calorimetry, and the strongest nucleating agent of the three was talc, followed by CaCO₃ and kaolin. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3315–3326, 2004     

Highly transparent antibacterial hydrogel-polymeric contact lenses doped with silver nanoparticles

Biocompatible polymers such as poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) are used to prepare hydrogels for biomedical applications, including optical applications such as the manufacture of sensing devices, cosmetic and smart, and medical contact lenses, among others. In this study, three contact lenses were prepared by doping PVP-PVA supportive hydrogel with 0.1, 0.5, and 1 wt% of laboratory-manufactured Ag NPs. The work demonstrates the evaluation of vision correction through each lens and the effect of changing the concentration of silver on its refractive index. The simulation involved the design and simulation of an aberrated human eye based on the Liou and Brennan model (LBM), and the insertion of the contact lenses for vision correction using the ZEMAX optical design program. This work also included a study of the antimicrobial properties of the resulting hydrogel contact lenses doped with Ag NPs. The resulting refractive index of one PVP-PVA-Ag lens was relatively high at 532 nm = 1.604, which made the lens provide the highest image contrast (the lowest MTF curve degradation) of 0.883 ± 0.027 at 20 cycles/mm and an RMS nearly the Airy disc diameter of 3.983 μm. PVA was used in combination with PVP for stabilizing Ag NPs to give the contact lenses an antibacterial property. Finally, the optimum contact lens with a 1 wt% Ag NPs concentration showed the highest inhibition activity.     

Effect on Mechanical Performance of UHMWPE/HDPE-Blend Reinforced with Kenaf,Basalt and Hybrid Kenaf/Basalt Fiber

The aim of this study was to investigate the performance of UHMWPE/HDPE-reinforced kenaf, basalt and hybrid kenaf/basalt composites. Mechanical testing of these samples was carried out such as tensile, flexural (three-point bending) and an impact test (Charpy). Pure resin (UHMWPE/HDPE) samples were tested and compare with reinforced 10% weight fraction of kenaf, basalt and hybrid kenaf/basalt samples to identifying their contribution and potential in this new composite material. UHMWPE/ HDPE sample was produced in constant ratio 60:40 respectively via extrusion process. Basalt reinforced UHMWPE/HDPE generates the highest elastic modulus result compared to kenaf and hybrid kenaf/basalt as a reinforcement material. The tensile results of kenaf reinforcement UHMWPE/HDPE samples are significantly higher (20%) than pure blend resin, which is an indication for good performance of kenaf, basalt and hybrid kenaf/basalt to be used in UHMWPE/HDPE-blend polymers. The flexural and Charpy strengths show the drawback results, where performance of polymer is reduced 5% with the absence of kenaf. It can be concluded that kenaf, basalt and hybrid kenaf/basalt fiber successfully increase the UHMWPE/HDPE blends performance especially under tensile loading.     

Properties of Ferrite-Filled Natural Rubber Composites

Nickel zinc ferrite (Ni-ZnFe₂O₄)-filled natural rubber (NR) composite was prepared at various loading of ferrite. The tensile properties included in this study were tensile strength, tensile modulus and elongation at break. The tensile strength and elongation at break of the composites increased up to 40 parts per hundred rubber (phr) of ferrite and then decreased at higher loading whereas the tensile modulus was increased gradually with increasing of ferrite loading. Scanning electron microscopy (SEM) was used to determine the wettability of filler in rubber matrix. From the observation, the increase of filler loading reduced the wettability of the filler. Thermal stability of the composites was conducted by using a thermogravimetry analyser (TGA). The incorporation of ferrite in NR composites enhanced the thermal stability of NR composites. The swelling test results indicate that the swelling percentage of the composites decreased by increasing of ferrite loading. The initial permeability, μ_i and quality factor, Q of magnetic properties of NR composites achieved maximum value at 60 phr of ferrite loading for frequency range between 5000–40,000 kHz. The maximum impedance, Z _max of the NR composites was at the highest value at 80 phr ferrite loading for frequency range between 200–800 MHz.     

Fabrication and Characterization of Jute Fiber-Reinforced PET Composite: Effect of LLDPE Incorporation

The aim of the research was to study the effect of LLDPE incorporation in the jute fiber-reinforced PET composites (50% fiber by wt). The effect of LLDPE incorporation into PET was investigated by measuring the mechanical properties of the LLDPE blended jute fiber-reinforced PET composites. LLDPE was blended (20-80% by wt) with PET and the thin films were made by compression molding. Water uptake of the composites was also investigated. Degradation of all the composites was carried out in soil medium.     

Enhanced Tensile and Dynamic Mechanical Properties of Thermoplastic Natural Rubber Nanocomposites

The melt compounding technique was employed to prepare thermoplastic natural rubber (TPNR) nanocomposites. The maleic anhydride grafted polyethylene (MA-PE) as a coupling agent was used to improve the filler-matrix interfacial adhesion. TPNR were prepared in the ratio of (70:20:10) from linear low-density polyethylene (LLDPE), natural rubber (NR) and liquid natural rubber (LNR) as a compatibilizer between the matrix. The composites were prepared using the in-situ method at the optimum processing parameter at 140°C with 100 rpm mixing speed and 12 minutes processing time. The results of the tensile test showed that the optimum of clay loading was obtained at 4 wt%. Dynamic mechanical analysis (DMA) was performed to investigate the thermomechanical properties of the composites. The results show that the addition of organoclay has improved the storage modulus (E′) and loss modulus (E′′) of TPNR nanocomposites. The α transition peaks was also shifted to the higher temperature. However, nanocomposites with MA-PE demonstrated higher, E′ and E′′ compared to TPNR nanocomposites without MA-PE. The TEM results show good clay dispersion with a combination of intercalated-exfoliated structure in the TPNR matrix.