The River Nile and Ethiopia’s Grand Renaissance Dam: challenges to Egypt’s security approach

There are increasing challenges to Egypt’s security approach to the River Nile. The river is under immense pressure. This paper examines the significance of the Nile for Egypt and the factors and problems of diminishing its waters. It reviews Egypt’s long-time policy on the Nile and concludes that this policy is difficult to maintain in the face of the present and future challenges. It recommends a non-security multilateral solution for the benefit of all parties.     

Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art

Russian Journal of Non-Ferrous Metals - Aluminum alloys have always been the material of choice for the aircraft industry owing to their versatile attributes, such as excellent strength to weight...     

Suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing

The stability of nano-zirconia 3YSZ powder in suspension was extensively studied by the colloidal method, and the optimum sintering temperature of the green sample fabricated through slip casting was determined. Zirconia suspensions with 10 vol% powder loading were prepared with distilled water, and HNO₃ was used to adjust the pH of the suspension to pH 1–6. All of the suspensions were subjected to sedimentation test, and the results showed that the suspensions adjusted to pH 2 had the lowest sediment volume. This finding indicates that a suspension with pH 2 produces higher packing density. Viscosity test was carried out for the suspensions added with dispersant ranging from 0.3 wt% to 0.7 wt% polyethyleneimine (PEI) with and without pH adjustment. The suspension containing 0.5 wt% PEI with pH 2 adjustment produced the lowest viscosity because of interparticle bond breakage in the aggregates, thus forming colloidally stable suspensions. The zirconia suspension containing 0.5 wt% PEI and whose pH was adjusted to pH 2 was chosen to be slip casted into cylindrical shape. Green samples were sintered at various sintering temperatures that ranged from 1100 °C to 1500 °C through a two-step sintering method. The sample sintered at 1500 °C was found to be porosite-free, and its highest relative density was 99.6% of the theoretical density. Morphological studies detected pores in the microstructure of the samples sintered at low sintering temperatures (1100 and 1200 °C). By contrast, the samples sintered at 1400 and 1500 °C were fully densified. However, the grain size of the sample sintered at 1500 °C was 230 nm, which indicated excessive grain growth. The Vickers hardness of the sample sintered at 1400 °C was found to be highest (12.9 GPa) and comparable to results found in the literature.     

Electrosynthesis and protection role of polyaniline–polvinylalcohol composite on stainless steel

Polyaniline–polyvinyl alcohol (PANI–PVA) composite has been electrodeposited on stainless steel surface from aqueous sulfuric acid solution of aniline monomer in presence of soluble PVA at different concentrations. The PVA increased the rate of electropolymerization where 4 g/L PVA formed a composite of 37 wt% PANI and 63 wt% PVA composition. The composite layer exhibited more adhesion to the steel surface in comparison with PANI layer but with less thermal stability. It has higher protection role for the stainless steel (SS) against general and pitting corrosion. It enhanced the passivation of the SS surface by increasing the thickness of oxide film and improving the composition.     

Oxidation stability and compositional characteristics of oils from microwave roasted pumpkin seeds during thermal oxidation

The oxidative stability and compositional characteristics of the pumpkin seed oil (PSO) exposed to microwaves were studied during heating at 170°C. The oxidative indices such as free fatty acid (FFA), peroxide value (PV), p-anisidine value (p-AV), TOTOX, specific extinctions and thiobarbituric acid (TBA) value of oils were significantly increased, and the increments were found to be significantly higher (P < 0.05) in unroasted seed oil as compared to roasted seed oil. The relative contents of polyunsaturated fatty acids (PUFAs) were decreased to 84.7%, and saturated fatty acids (SFAs) were increased to 119.5% in unroasted sample, after 9 h of heating. On the other hand, in 12 min roasted samples, the relative contents of PUFAs were decreased to 97.0%, and SFAs were increased to 102.6% after 9 h of heating. The triacylglycerol species LLL and OLL levels were decreased as a consequence of increased heating time, and the reduction tended to be significantly higher in unroasted samples as compared to roasted ones. The oxidation products formed were also investigated by FTIR. The present results indicated that microwave roasting of pumpkin seeds markedly enhanced the oxidative stability of the oils during heating.     

Synthesis and Characterization of Cationic Surfactants Based on N‐Hexamethylenetetramine as Active Microfouling Agents

Four cationic surfactants of quaternary hexammonium silane chloride based on hexamethylenetetramine and alkyl chloride were synthesized. The chemical structures of the prepared cationic surfactants were elucidated using Fourier transform infrared (FT‐IR) spectroscopy and mass spectrometry analysis. The surface and thermodynamic properties of the prepared surfactants were also studied. The performance of these cationic surfactants as microfouling agents against two strains of Gram‐negative bacteria, namely, Pseudomonas aeruginosa and Escherichia coli, and two strains of Gram‐positive bacteria, namely, Staphylococcus aureus and Bacillus subtilis, were evaluated as antimicrobial agents. The results showed that the maximum antimicrobial activity was detected for N‐hexamethylenetetramine‐N‐ethyl silane ammonium trichloride (Ah). The maximum and minimum antimicrobial activities were 73 and 60 % against S. aureus and E. coli, respectively, at a concentration of 5 mg/l, pH 7, and 37 °C.     

Properties of Ferrite-Filled Natural Rubber Composites

Nickel zinc ferrite (Ni-ZnFe₂O₄)-filled natural rubber (NR) composite was prepared at various loading of ferrite. The tensile properties included in this study were tensile strength, tensile modulus and elongation at break. The tensile strength and elongation at break of the composites increased up to 40 parts per hundred rubber (phr) of ferrite and then decreased at higher loading whereas the tensile modulus was increased gradually with increasing of ferrite loading. Scanning electron microscopy (SEM) was used to determine the wettability of filler in rubber matrix. From the observation, the increase of filler loading reduced the wettability of the filler. Thermal stability of the composites was conducted by using a thermogravimetry analyser (TGA). The incorporation of ferrite in NR composites enhanced the thermal stability of NR composites. The swelling test results indicate that the swelling percentage of the composites decreased by increasing of ferrite loading. The initial permeability, μ_i and quality factor, Q of magnetic properties of NR composites achieved maximum value at 60 phr of ferrite loading for frequency range between 5000–40,000 kHz. The maximum impedance, Z _max of the NR composites was at the highest value at 80 phr ferrite loading for frequency range between 200–800 MHz.     

Molecular weight studies of the γ‐irradiation degradation of poly(methyl methacrylate) doped with poly(p‐sulfanilamide)

The protection of some poly(methyl methacrylate) (PMMA) samples against γ rays was investigated in the absence and presence of poly(p‐sulfanilamide). Pure PMMA (without additives) and PMMA–poly(p‐sulfanilamide) blend samples were irradiated with γ rays for different exposure doses (5, 15, 25, 35, 50, 75, and 100 kGy). The viscosity‐average molecular weights were determined and thin‐layer chromatography measurements were carried out after each irradiation dose. The maximum protection against γ rays was found when 1% poly(p‐sulfanilamide) was used. The radiation chemical yield for main scission (G_s) was calculated and had lower values in the case of 1% poly(p‐sulfanilamide). The energy absorption per scission was maximum for 1% poly(p‐sulfanilamide), and this confirmed the obtained G_s data. From thin‐layer chromatography studies, it was observed that both the retention factor (R_f) values and polydispersity of the PMMA samples increased with an increasing exposure dose. The effect of γ irradiation on PMMA films doped with 1% poly(p‐sulfanilamide) was investigated with UV spectroscopy after the extraction of the additives. A change in the intensity of the absorption bands with an increasing irradiation dose was recorded. It is suggested that PMMA films doped with this type of polymer can be used as dosimeters. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effects of acid strength and micro pore size on -caprolactam selectivity and catalyst deactivation in vapor phase Beckmann rearrangement over acid solid catalysts

The vapor phase Beckmann rearrangement of cyclohexanone oxime (CHO) over solid acid catalysts including zeolites was carried out to elucidate the effects of the acid strength and the micropore size of the catalysts on the selectivity of -caprolactam (CL) and the catalyst deactivation rate. It was found that the catalyst deactivation rate was strongly dependent on the acid strength of the acid catalysts. The improvement of catalyst life was achieved by using MFI-type metallosilicates having weak acid sites. The CL selectivity decreased over the acid catalysts with micropores larger than those of the MFI zeolites. Furthermore, using methanol and carbon dioxide as the diluent solvent and diluent gas improved CL selectivity and catalyst life, respectively.