Modularisierung von Gaswäschern für die CO2‐Entfernung aus Biogas

Modularization has been identified as one of the research fields of the ?50 % idea”?. A development methodology for modules must consider both the economies of scale for investment costs and costs of operation and maintenance. In this paper, the impact of an absorber module, which is offered as discretized diameter scaling, on the total process is investigated at the example of the CO₂ separation from biogas. The simulation shows the effect of this approach to the stripper diameter and the energy demand of the process. The calculations form the basis for applying cost models.     

Development and Evaluation of a Nanoparticle Generator for Human Inhalation Studies with Airborne Zinc Oxide

In the EU there is an increasing need for regulatory agencies to derive health based threshold limits based on human inhalation studies with airborne particles. A necessary prerequisite for such projects is the development of a suitable generator system to produce nanoparticle test aerosols for human whole-body inhalation studies. We decided to use a generator with flame-based heating of aqueous precursor solutions. Validation of the test system was done by generating zinc oxide (ZnO) nanoparticles with minimal contamination of trace gases, i.e., nitric oxides or carbon monoxide that could confound the effects seen in exposed subjects. ZnO was selected based on the uncertainties surrounding its health effects after exposure at the workplace. The generation process of the developed flame generator yields ZnO nanoparticles with monomodal size distribution and very good temporal stability. The maximum target exposure mass concentration of 2 mg/m³ ZnO, with a resulting median particle diameter of 57 nm, is attainable in our human exposure laboratory. The morphological examination shows typical agglomerates and aggregates formed by high temperature processes. Overall, the performed experiments confirm that a constant exposure can be provided for all subjects at all times.

Copyright 2014 American Association for Aerosol Research     

Non-fickian diffusion with reaction in glassy polymers with swelling induced by the penetrant—effects of consecutive and parallel reactions

A mathematical model is presented for non-Fickian diffusion of a penetrant A into a granular glassy polymer containing a reactive group B, resulting in the desired product P. Further, both a consecutive reaction between A and P (producing X) and a parallel reaction between A and C (producing Y) are incorporated, with C initially present in the particle. The swelling of the polymer, induced by the penetrant, is described by power-law kinetics for the velocity of the swelling front. Kinetics are considered to be first order in each of the two reactants. Concentration profiles in the particle and selectivity to desired product are calculated as function of the swelling behavior of the polymer grain. In case of a consecutive reaction the local concentration of P reaches a maximum value independent of the swelling rate. However, the position of the maximal concentration of P moves towards the center of the grain with a rate depending on the kinetics of swelling. For Case II diffusion this velocity equals the velocity of the advancing front between glassy and rubbery polymer. The selectivity of the desired reaction decreases with decreasing swelling rate. A low swelling rate also results in an inhomogeneous product distribution within the granule. A criterion is derived predicting under what conditions the consecutive reaction can be neglected and a pure product is obtained. The analysis further reveals that both a more homogeneous product and a higher selectivity toward a desired product can be obtained by realizing preswelling of the polymer with an inert swelling agent. For Case II diffusion the concentration profiles of the side product of the parallel reaction, Y, are flat in the rubbery part of the polymer. This is caused by the relatively low swelling rate allowing Y to redistribute in the swollen polymer. If additional C is continuously supplied from the gas phase, then the selectivity decreases continuously with increasing conversion of B.     

Ein Beitrag zur Biosynthese amylosereicher Erbsenstärken

Contribution to the Biosynthesis of High-amylose Pea Starches Biosynthesis of starch is a complex process but few details are still unknown. This paper describes an investigation upon pea starch biosynthesis. Peas as a source of starch offer two qualities, a pea starch with 40% amylose content (smooth pea starch) and a pea starch with more than 60% amylose content (wrinkled pea starch). Samples for analysis were taken during growth. According to the quantitative determination of starch and amylose the accuracy of amylose detection was tested. Furthermore a qualitative analysis was carried out by molecular weight estimation of the starch. Both kinds of peas showed a high amylose synthesis during the last few days of growth, whereas amylopectin synthesis was highly in earlier stages. Wrinkled peas have shown only little synthesis activity of amylopectin during maturity. Therefore the amylose content of these peas was higher, instead of equal amylose synthesis quotas of both smooth and wrinkled peas.     

Investigations on Selectivity of Gas-Liquid Reactions in Capillaries

Biocatalysis offers a broad spectrum of possible ecological and economic advantages over conventional chemical catalysis processes, e.g., lower energy consumption and high enantio selectivity. The focus of this work is on gas-liquid reactions. These are of great importance in the chemical and biochemical industry and subject of current research since they are often limited by mass transfer or show low selectivity. Different suitable biocatalytically gas-liquid reaction systems were tested in capillary reactor designs in order to obtain information about the interaction between reaction and fluid mechanics. Furthermore, an optical measuring method was established. The experiments were performed in batch mode in a glass beaker with a flow cuvette for UV/Vis measurement of product concentration.     

Untersuchungen zur Amylosebestimmung in proteinreichen Stärkerohstoffen,insbesondere Erbsen

Investigations on the Amylose Determination in High Protein Starch Source Materials, Especially Peas. The proposed utilization of amylose rich starches requires different methods of amylose determination. In addition to laboratory methods also simple tests are important to that. Because the discussed legume starches are hardly investigated, first of all the suitability of the amperometric iodine titration had to be checked. Then a more easier work was described. In the case of routine analyses a modified test procedure was compared with the method of iodine titration.     

Genetic Deficiency and Pharmacological Stabilization of Mast Cells Ameliorate Pressure Overload-Induced Maladaptive Right Ventricular Remodeling in Mice

Although the response of the right ventricle (RV) to the increased afterload is an important determinant of the patient outcome, very little is known about the underlying mechanisms. Mast cells have been implicated in the pathogenesis of left ventricular maladaptive remodeling and failure. However, the role of mast cells in RV remodeling remains unexplored. We subjected mast cell-deficient WBB6F1-KitW/W-v (Kit^W/Kit^W-v) mice and their mast cell-sufficient littermate controls (MC^+/+) to pulmonary artery banding (PAB). PAB led to RV dilatation, extensive myocardial fibrosis, and RV dysfunction in MC^+/+ mice. In PAB Kit^W/Kit^W-v mice, RV remodeling was characterized by minimal RV chamber dilatation and preserved RV function. We further administered to C57Bl/6J mice either placebo or cromolyn treatment starting from day 1 or 7 days after PAB surgery to test whether mast cells stabilizing drugs can prevent or reverse maladaptive RV remodeling. Both preventive and therapeutic cromolyn applications significantly attenuated RV dilatation and improved RV function. Our study establishes a previously undescribed role of mast cells in pressure overload-induced adverse RV remodeling. Mast cells may thus represent an interesting target for the development of a new therapeutic approach directed specifically at the heart.     

Size-Dependent Cellular Uptake of RGD Peptides

Monomeric RGD peptides show unspecific fluid-phase uptake in cells, whereas multimeric RGD peptides are thought to be internalized by integrin-mediated endocytosis. However, a potential correlation between uptake mechanism and molecular mass has been neglected so far. A dual derivatization of peptide c(RGDw(7Br)K) was performed to investigate this. A fluorescent probe was installed by chemoselective Suzuki–Miyaura cross-coupling of the 7-bromotryptophan and a poly(ethylene glycol) (PEG) linker was attached to the lysine residue. Flow cytometry and live cell imaging confirmed unspecific uptake of the small, non-PEGylated peptide, whereas the PEG₅₀₀₀ peptide conjugate unveiled a selective internalization by M21 cells overexpressing α_vβ₃ and no uptake in α_v-deficient M21L cells.     

A non-conserved sequence in the 5'region of the CYH2 intron from Saccharomyces cerevisiae controls splicing efficiency of the pre-mRNA

The CYH2 gene from Saccharomyces cerevisiae containing one 510 bp intron is spliced inefficiently. We have shown previously that a non-conserved sequence within the intron is responsible for this low splicing efficiency. Using synthetic oligonucleotides comprising the identified region we show in this report that a very short region contains the specificity to act negatively on the splicing efficiency of the CYH2 gene. Furthermore, this sequence influences the splicing efficiency only when it is placed close to the 5' splice site of the gene. Investigations with chimeric CYH2/beta-actin genes show that this sequence acts independent from its natural surroundings. We propose that this sequence might interact with splicing factor(s).