Hierarchical steganography using novel optimum quantization technique

Security and imperceptibility are fundamental issues for steganography. This paper presents a multi-level steganography system based on concealing and deception. Basically, the secret image is embedded in a cover image, which in turn is embedded in another higher-level cover image. Each steganography level provides additional security, with lower levels implemented using stronger steganography methods. Furthermore, in the event that the higher level steganography is compromised, it would include misleading information to deceive the attacker that he/she is successfully eavesdropping. One challenge of hierarchical system is retaining hidden data in lower level in a higher level stenographic technique. To mitigate this issue, we designed a novel technique which combines discrete cosine transform and least significant bit (LSB). The technique objective is to maximize the capacity and invisibility of the secret image with minimal modification to the cover image (at most k-bits per block). The performance (capacity and peak signal-to-noise ratio) of the proposed method has superior performance compared with LSB since it combines the benefits of 1-bit and 3-bit LSBs. Furthermore, the paper demonstrates that the secret message is successfully embedded and extracted in two-level steganography system with peak signal-to-nose ratio greater than 20 dB.     

Optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin composite using metaheuristic algorithms

Injectable calcium phosphate cements have been introduced as adjuncts to internal fixation for treating selected fractures. These cements harden without producing much heat, develop compressive strength, and are remodeled slowly in vivo. The main purpose of the cement is to fill voids in metaphyseal bone, thereby reducing the need for bone graft. However, such cements may also improve the holding strength around metal devices in osteoporotic bone. This paper presents the optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin (CPC/MWCNT-OH/BSA) composites in terms of compressive strength using well-known metaheuristic optimizers. The process parameters studied were wt% of MWCNT-OH (0.2–0.5 wt%) and wt% of BSA (5–15 wt%). The obtained results from metaheuristic algorithms were compared with the results from the response surface methodology (RSM) in the literature. The results obtained from metaheuristic algorithms outperformed the results given by the RSM in terms of less error percentage and high compressive strength.     

Design of Nonlinear Servo Systems by the Fuzzy Method

This paper presents the design of nonlinear servo systems using the fuzzy method. The idea behind this control method is to divide the operating region of a nonlinear system into a collection of local linear servo control systems and apply the fuzzy method for calculation of the control input. The control input of each local linear servo system is calculated using the Davison–Smith method and the Hikita pole assignment method. We can prove that all states of the fuzzy servo system are bounded and that the output errors converge to zero by the Lyapunov method. Simulations on a nonlinear mass‐spring‐damper system illustrate the effectiveness of the proposed method.     

Effects of peroxide crosslinking on the mechanical and morphological properties of poly(ethylene‐co‐vinyl acetate)/zeolite composites

Uncrosslinked and chemically crosslinked ethylene‐vinyl acetate copolymers (EVAs) with 5–25 volume percentages of zeolite were prepared in a melt‐mixing process and then compression‐molded on a hot‐press machine according to standard test specifications. The mechanical properties measured by tensile test showed a reduction in tensile strength and elongation at break with increasing zeolite content. However, an increasing trend was observed for tensile modulus with addition of zeolite. Experimental results for ultimate stress were compared with those from Pukanszky equation. The experimental data showed a good fit to the Pukanszky model. The improvement in the interfacial interaction for crosslinked composites was also confirmed by this model. Morphological changes of EVA/zeolite composites were analyzed by scanning electron microscopy (SEM). The fractured surface of the composites indicated more complex morphology at higher zeolite loading. The influence of crosslinking induced by 2 wt% of dicumyl peroxide on the properties of EVA/zeolite composites was also investigated. The crosslinked composites showed better tensile properties than the uncrosslinked ones, a result which might be an indication of enhanced interaction between the EVA and zeolite. Density measurements, gel content determinations, and Fourier transform infrared analyses were also performed to evaluate the crosslink content of the composites. The changes in the properties of chemically crosslinked EVA/zeolite composites were observed. Meanwhile, SEM micrographs of the crosslinked EVA/zeolite composites showed better interfacial strength between zeolite and the EVA matrix as compared to that of the uncrosslinked composites. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Phase Transformations of α-Alumina Made from Waste Aluminum via a Precipitation Technique

We report on a recycling project in which α-Al₂O₃ was produced from aluminum cans because no such work has been reported in literature. Heated aluminum cans were mixed with 8.0 M of H₂SO₄ solution to form an Al₂(SO₄)₃ solution. The Al₂(SO₄)₃ salt was contained in a white semi-liquid solution with excess H₂SO₄; some unreacted aluminum pieces were also present. The solution was filtered and mixed with ethanol in a ratio of 2:3, to form a white solid of Al₂(SO₄)₃·18H₂O. The Al₂(SO₄)₃·18H₂O was calcined in an electrical furnace for 3 h at temperatures of 400–1400 °C. The heating and cooling rates were 10 °C/min. XRD was used to investigate the phase changes at different temperatures and XRF was used to determine the elemental composition in the alumina produced. A series of different alumina compositions, made by repeated dehydration and desulfonation of the Al₂(SO₄)₃·18H₂O, is reported. All transitional alumina phases produced at low temperatures were converted to α-Al₂O₃ at high temperatures. The X-ray diffraction results indicated that the α-Al₂O₃ phase was realized when the calcination temperature was at 1200 °C or higher.     

Experiments on Surface Reconstruction for Partially Submerged Marine Structures

Over the past 10 years, significant scientific effort has been dedicated to the problem of three‐dimensional (3‐D) surface reconstruction for structural systems. However, the critical area of marine structures remains insufficiently studied. The research presented here focuses on the problem of 3‐D surface reconstruction in the marine environment. This paper summarizes our hardware, software, and experimental contributions on surface reconstruction over the past few years (2008–2011). We propose the use of off‐the‐shelf sensors and a robotic platform to scan marine structures both above and below the waterline, and we develop a method and software system that uses the Ball Pivoting Algorithm (BPA) and the Poisson reconstruction algorithm to reconstruct 3‐D surface models of marine structures from the scanned data. We have tested our hardware and software systems extensively in Singapore waters, including operating in rough waters, where water currents are around 1–2 m/s. We present results on construction of various 3‐D models of marine structures, including slowly moving structures such as floating platforms, moving boats, and stationary jetties. Furthermore, the proposed surface reconstruction algorithm makes no use of any navigation sensor such as GPS, a Doppler velocity log, or an inertial navigation system.     

Consumer shopping behaviour on the Internet: insights from Malaysia

Shopping on the Internet enables consumers to search for information on products or services and make purchases through direct interaction with online retailers. This study investigates consumer shopping behaviour on the Internet based on four aspects, i.e. the Internet marketing environment, product characteristics, familiarity, and promotional offers. The impact of influencing factors was checked by questionnaire survey, which was then processed and evaluated. Two hundred randomly selected respondents (students and employees in a public higher learning institution in the Federal Territory of Labuan, Malaysia) participated in the survey. Multiple regression analysis was used as a statistical measure to determine the most influential relationship aspect among a series of independent variables of consumer shopping on the Internet. The results revealed that familiarity has a great influence on consumer shopping on the Internet, followed by promotional offers. The assimilation of these aspects, and the empirical examination of the factors that influence consumer shopping on the Internet, advanced understanding of these constructs and their link to dynamic technology deployment for shopping. The paper suggests managerially actionable implications, and future research directions.     

Model-based test case generation and prioritization: a systematic literature review

Software and Systems Modeling - Model-based test case generation (MB-TCG) and prioritization (MB-TCP) utilize models that represent the system under test (SUT) for test generation and...     

Thermal stability of natural fibers and their polymer composites

Natural fiber-based composites are applied in many structural engineered products from civil constructions to automobile manufacturing due to the properties such as low density, high aspect ratio, biodegradability and ease to work. During the past decades such composites have been thoroughly studied for their mechanical properties and failure behavior and their properties compared with those of synthetic fiber-based composites. Other properties, such as the thermal behavior of natural fibers and composites, have also been studied because they determine the performance of their products possible. It deals with the effect of temperature on adhesive curing, effect of high temperature and fire damage during fabrication. Further, the thermal properties have equal importance in structural applications such as temperature transfer from end to end, load capacity at specific temperature, material behavior and dimensional stability at high temperature. In this respect the isothermal and non-isothermal thermogravimatric analyses are discussed and the improtance of glass transition temperature is studied during prepapration of composites to ensure their ultimate properties. Although there are several works that have been done on thermal behavior, especially thermogravimetric analysis of natural fibers and their composites, there is no review article available specially focused on natural fiber-based composites, hybrid composites, and nanocomposites. The aim of this review was to focus on the advances in the comprehension of thermogravimetric behavior of natural fibers and compare the effect of natural fibers as reinforced materials in polymer composites.