Mineralization of bisphenol A (BPA) by anodic oxidation with boron-doped diamond (BDD) electrode

Anodic oxidation of bisphenol A (BPA), a representative endocrine disrupting chemical, was carried out using boron-doped diamond (BDD) electrode at galvanostatic mode. The electro-oxidation behavior of BPA at BDD electrode was investigated by means of cyclic voltammetric technique. The extent of degradation and mineralization of BPA were monitored by HPLC and total organic carbon (TOC) value, respectively. The results obtained, indicate that the BPA removal at BDD depends on the applied current density (Iappl), initial concentration of BPA, pH of electrolyte and supporting medium. Galvanostatic electrolysis at BDD anode cause concomitant generation of hydroxyl radical that leads to the BPA destruction. The kinetics for the BPA degradation follows a pseudo-first order reaction with a higher rate constant 12.8x10(-5) s(-1) for higher Iappl value 35.7 mA cm(-2), indicating that the oxidation reaction is limited by Iappl control. Complete mineralization of BPA was achieved regardless of the variables and accordingly the mineralization current efficiency was calculated from the TOC removal measurements. Considering global oxidation process, the effect of supporting electrolytes has been discussed in terms of the electro generated inorganic oxidants. The better performance of BDD anode was proved on a comparative study with Pt and glassy carbon under similar experimental conditions. A possible reaction mechanism for BPA degradation involving three main aromatic intermediates, identified by GC-MS analysis, was proposed.     

Post-concussive symptoms in children with mild traumatic brain injury.

To investigate postconcussive symptoms (PCS) following pediatric mild traumatic brain injury (mTBI), 8- to 15-year-old children with mTBI (n = 186) and a comparison group with uncomplicated orthopedic injuries (OI, n = 99) were recruited from two emergency departments. Parent and child ratings of PCS and symptom counts were obtained within 3 weeks after injury (baseline) and at 1, 3, and 12 months postinjury. The mTBI group also completed magnetic resonance imaging at baseline. Group differences were examined using growth modeling, controlling for age at injury, sex, socioeconomic status, and (for parent-based measures) preinjury symptom levels. Relative to the OI group, the mTBI group had higher ratings of somatic PCS and parent counts of PCS at the initial assessments, but higher parent ratings of cognitive PCS and child counts of PCS throughout follow-up. Higher levels of PCS in the mTBI group were associated with motor-vehicle-related trauma, loss of consciousness, neuroimaging abnormalities, and hospitalization. The findings validate both transient and persistent PCS in children with mTBI and document associations of symptoms with injury and noninjury factors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

TEM analysis of high temperature annealed W nanostructure surfaces

Helium plasma irradiation and electron heating experiments were conducted using tungsten in the divertor simulator NAGDIS-II. Helium plasma irradiation to tungsten led to the formation of nanostructures on the surface, while the nanostructures were annihilated after the potential of the specimen was changed to positive for several 10 min so that electrons irradiated the sample without ion irradiation. The specimens were analyzed in detail by transmission electron microscope with the help of focused ion beam technique. It is revealed that the helium nano-bubbles still remained even after the nanostructures were disappeared from the surface. Porosity of the nanostructured tungsten was measured from the TEM images.     

Preparation and properties of biocomposites composed of sorbitol‐based epoxy resin,pyrogallol–vanillin calixarene,and wood flour

The reaction of pyrogallol (PG) and vanillin (VN), both of which are derived from plant resources, in the presence of p‐toluenesulfonic acid gave PG–VN calixarene (PGVNC) mainly composed of guaiacyl pyrogallol[4]arene. After sorbitol polyglycidyl ether (SPE) was mixed with PGVNC in tetrahydrofuran at an optimized epoxy/hydroxy ratio 1/2.65, the obtained SPE/PGVNC solution was mixed with wood flour (WF), prepolymerized at 150°C, and subsequently compressed at 190°C for 3 h to give SPE–PGVNC/WF biocomposites with WF content 0–20 wt%. The tan δ peak temperature of SPE–PGVNC was 148.1°C, which was much higher than that of the SPE cured with petroleum‐based phenol novolac (SPE–PN) at an optimized epoxy/hydroxy ratio 1/1. Although tan δ peak temperature slightly decreased with increasing WF content, the storage moduli of the SPE–PGVNC/WF biocomposites in the rubbery state at more than 150°C were much higher than those of SPE–PGVNC and SPE–PN. Also, the tensile modulus and strength for SPE–PGVNC/WF increased with increasing WF content. Field emission‐scanning electron microscopy analysis of the biocomposites revealed that WF is tightly incorporated into the crosslinked epoxy resins. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Identification of Receptor Tyrosine Kinase, Discoidin Domain Receptor 1 (DDR1), as a Potential Biomarker for Serous Ovarian Cancer

Ovarian cancer, one of the most common gynecological malignancies, has an aggressive phenotype. It is necessary to develop novel and more effective treatment strategies against advanced disease. Protein tyrosine kinases (PTKs) play an important role in the signal transduction pathways involved in tumorigenesis, and represent potential targets for anticancer therapies. In this study, we performed cDNA subtraction following polymerase chain reaction (PCR) using degenerate oligonucleotide primers to identify specifically overexpressed PTKs in ovarian cancer. Three PTKs, janus kinase 1, insulin-like growth factor 1 receptor, and discoidin domain receptor 1 (DDR1), were identified and only DDR1 was overexpressed in all ovarian cancer tissues examined for the validation by quantitative real-time PCR. The DDR1 protein was expressed in 63% (42/67) of serous ovarian cancer tissue, whereas it was undetectable in normal ovarian surface epithelium. DDR1 was expressed significantly more frequently in high-grade (79%) and advanced stage (77%) tumors compared to low-grade (50%) and early stage (43%) tumors. The expression of the DDR1 protein significantly correlated with poor disease-free survival. Although its functional role and clinical utility remain to be examined in future studies, our results suggest that the expression of DDR1 may serve as both a potential biomarker and a molecular target for advanced ovarian cancer.     

High-performance embedded SOI DRAM architecture for the low-powersupply

This paper presents the high-performance DRAM array and logic architecture for a sub-1.2-V embedded silicon-on-insulator (SOI) DRAM. The degradation of the transistor performance caused by boosted wordline voltage level is distinctly apparent in the low voltage range. In our proposed stressless SOI DRAM array, the applied electric field to the gate oxide of the memory-cell transistor can he relaxed. The crucial problem that the gate oxide of the embedded-DRAM process must be thicker than that of the logic process can be solved. As a result, the performance degradation of the logic transistor can be avoided without forming the gate oxides of the memory-cell array and the logic circuits individually. In addition, the data retention characteristics can be improved. Secondly, we propose the body-bias-controlled SOI-circuit architecture which enhances the performance of the logic circuit at sub-1.2-V power supply voltage, Experimental results verify that the proposed circuit architecture has the potential to reduce the gate-delay time up to 30% compared to the conventional one. This proposed architecture could provide high performance in the low-voltage embedded SOI DRAM     

Heavy coal combustion as the dominant source of particulate pollution in Taiyuan, China, corroborated by high concentrations of arsenic and selenium in PM10

Coal burning generates toxic elements, some of which are characteristic of coal combustion such as arsenic and selenium, besides conventional coal combustion products. Airborne particulate samples with aerodynamic diameter less than 10 microm (PM(10)) were collected in Taiyuan, China, and multi-element analyses were performed by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Concentrations of arsenic and selenium from ambient air in Taiyuan (average 43 and 58 ng m(-3), respectively) were relatively high compared to what is reported elsewhere. Arsenic and selenium were found to be highly correlated (r=0.997), indicating an overwhelmingly dominant source. Correlation between these two chalcophile elements and the lithophile element Al is high (r is 0.75 and 0.72 for As and Se, respectively). This prompted the hypothesis that the particles were from coal combustion. The enrichment of the trace elements could be explained by the volatilization-condensation mechanism during coal combustion process. Even higher correlations of arsenic and selenium with PM(10) (r=0.90 and 0.88) give further support that airborne particulate pollution in Taiyuan is mainly a direct result of heavy coal consumption. This conclusion agrees with the results from our previous study of individual airborne particles in Taiyuan.     

Design methodology of embedded DRAM with virtual-socketarchitecture

This paper proposes the virtual-socket architecture in order to reduce the design turn-around time (TAT) of the embedded DRAM. The required memory density and the function of the embedded DRAM are system dependent. In the conventional design, the DRAM control circuitry with the DRAM memory array is handled as a hardware macro, resulting in the increase in design TAT. On the other hand, our proposed architecture provides the DRAM control circuitry as a software macro to take advantage of the automated tools based on synchronous circuit design. With array-generator technology, this architecture can achieve high quality and quick turn-around time (QTAT) of flexible embedded DRAM that is almost the same as the CMOS ASIC. We applied this virtual-socket architecture to the development of the 61-Mb synchronous DRAM core using 0.18-μm design rule and confirmed the high-speed operation, 166 MHz at CAS latency of two, and 180 MHz at that of three. The experimental results show that our proposed architecture can be applied to the development of the high-performance embedded DRAM with design QTAT     

A new acousto-electro-optic improved resolution deflector for high frequency operation

The two main constrains on the characteristics of the acousto-optic deflector are the acoustic sound attenuation and velocity. These two parameters will determine the resolution and the radio frequency bandwidth. Due to a double degenerated phase matching condition on a specific acousto-optic deflector configuration, the possibility of an improvement on the resolution of the acousto optic deflector becomes evident. This degenerescence is the result of the action of a D.C. electric field by the electro-optic effect. This configuration presents several advantages upon the early related works based on optical activity of selected materials and enables a wideband interaction in such a way that the number of resolvable channels is kept high. This has implications on the acousto-optic spectrometers for wideband radio astronomy research.