Intraoperative monitoring for spinal cord tumor by spinal cord evoked potential following unilateral spinal cord stimulation

We described our experiences with intraoperative spinal cord monitoring in 6 cases of spinal cord tumor. During the operation, spinal cord evoked potential following unilateral spinal cord stimulation was recorded from subdural monitoring electrodes. This series included two cases of intradural extramedullary tumor (one case each of neurinoma and of meningioma) and four cases of intramedullary tumor (2 cases of cavernous angioma, one case each of ependymoma, and of glioblastoma multiforme). Before the removal of the tumor, the spinal cord evoked potential showed lower amplitude or no response on the more affected side in all 6 cases. During the operation, the different intraoperative changes were shown on each side. The authors think that the detection of unilateral damage to the spinal cord is possible in spinal cord evoked potential using unilateral spinal cord stimulation.     

A method for inspecting industrial parts surfaces based on an optics model

A new method based on an optics model for highly reliable surface inspection of industrial parts has been developed. This method uses multiple images taken under different camera conditions. Phong's model is employed for surface reflection, and then the albedo and the reflection model parameters are estimated by the least squares method. The developed method has advantages over conventional binarization in that it can easily determine the threshold of product acceptability and cope with changes in light intensity when detecting defects.     

Removal of organic compounds by alginate gel beads with entrapped activated carbon

The adsorption of alginate gel (AG) beads and AG with activated carbon entrapped (AG–AC) beads prepared using different types of metal ions were investigated by measuring the removal of several organic compounds with different charges and size. AG–AC beads prepared in a CaCl₂ solution adsorbed strongly positively charged compounds as well as electrically neutral and low molecular weight compounds such as p-chlorophenol. However, a high molecular weight humic acid was not adsorbed by AG–AC. The AG–AC selectively adsorbed p-chlorophenol from a humic acid solution. The adsorption capacity obtained from the adsorption isotherm of AC entrapped in AG was compared with that of AC. The AG–AC beads prepared in a solution of FeCl₃ were able to specifically adsorb negatively charged gallic acid. Thus, entrapping AC into AG resulted in the selective adsorption.     

Horseradish peroxidase degrades lipid hydroperoxides and suppresses lipid peroxidation of polyunsaturated fatty acids in the presence of phenolic antioxidants

Linoleic acid hydroperoxide (LAOOH) was effectively degraded by horseradish peroxidase (HRP) in the presence of quercetin. Several natural phenolic antioxidants, such as quercetin, capsaicin, and alpha-tocopherol, acted as good hydrogen donors in the peroxidase reaction that occurs during lipid hydroperoxide degradation. However, glutathione, which is a non-phenolic antioxidant that acts as a hydrogen donor for glutathione peroxidase, could not suppress lipid peroxidation in the presence of HRP. Lipid hydroperoxides generated from eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) were also degraded with HRP in the presence of quercetin, and oxidative decomposition of DHA was suppressed by this reaction.     

Behavior navigation system for harsh environments

Performing general human behavior by experts’ navigation is expected to be realized as wearable technologies and computing systems are further developed. We have proposed and developed the prototype of the advanced behavior navigation system (BNS) using augmented reality technology. Utilizing the BNS, an expert can guide a non-expert to perform a variety of tasks. The BNSs are useful in tasks to be performed in harsh and hazardous environments, such as factories, construction sites, and areas affected by natural disasters (e.g. earthquakes and tsunamis). In this paper, we present a BNS that is specifically designed to operate in harsh environments, with characteristics such as wet or dusty conditions. The implementation, experimental results, and evaluation of the BNS prototypes are presented.     

Serum autoantibody to sideroflexin 3 as a novel tumor marker for oral squamous cell carcinoma

The purpose of this study is to establish a tumor marker that can be applied for the early detection and follow-up of oral cancer patients. Employing the proteomic approach using MALDI TOF-MS, 2-DE, patient's sera and culturing cell lines, the serum autoantibodies (autoAbs) were screened and the serum levels were estimated by ELISA. Targeting the tumor cell invasion into the surrounding stromal tissues, MRC-5 human fibroblasts were employed as the target cells and a mitochondrial membrane protein, sideroflexin 3 (SFXN3), was identified. The serum anti-SFXN3-autoAb levels elevated in patients with the oral squamous cell carcinoma significantly: with 77% sensitivity and 89% specificity against control samples. The serum anti-SFXN3-autoAb levels were mildly correlated with the primary tumor sizes, however, the levels were slightly highly elevated in T1 early cancer. An immunohistochemical analysis revealed that the SFXN3 protein is expressed in the stromal fibroblasts between the caner nests and also in the basal layer of the squamous epithelium. Changes in the serum anti-SFXN3-autoAb levels after therapy correlated with the clinical tumor burden. These findings demonstrated that the serum anti-SFXN3-autoAb is worthy of clinical evaluation as a potentially of the novel tumor maker for the early detection of oral squamous cell carcinoma.     

Photoluminescence imaging of phosphor particles using near-field optical microscope with UV light excitation

We have developed fibre probes suitable for 325 nm UV light excitation and a photoluminescence near-field scanning optical microscope (NSOM) and demonstrated the photoluminescence imaging of phosphor BaMgAl₁₀O₁₇:Eu²⁺ (BAM) particles. The probe was fabricated by a two-step-etching method that we developed. The probe had a large taper angle at the top of the probe and a small taper angle at the root. The NSOM image was different from the topographical structure but roughly reflected the corresponding features of the particles. The inhomogeneity of the photoluminescence intensity between BAM particles was observed in the NSOM image. The photoluminescence intensity with various bandpass filters showed differences between the individual particles, which means that they have different spectra.     

UV-induced switching behavior of novel fluoroalkyl end-capped vinyltrimethoxysilane oligomer/titanium oxide nanocomposite between superhydrophobicity and superhydrophilicity with good oleophobicity

Fluoroalkyl end-capped vinyltrimethoxysilane oligomer suffered the sol–gel reaction under alkaline conditions in the presence of titanium oxide nanoparticles in tetrahydrofuran to afford the corresponding fluorinated oligomer/titanium oxide nanocomposites[R_F-(VM-SiO₂)_n-R_F/TiO₂] in excellent to moderate isolated yields. These fluorinated composites thus obtained were nanometer size-controlled fine particles, and exhibited good dispersibility and stability in traditional organic solvents except for water. These fluorinated nanocomposites were applied to the surface modification of glass to exhibit not only a completely superhydrophobic characteristic (a water contact angle: 180°) with a non-wetting property against water droplets but also a good oleophobicity imparted by fluoroalkyl segments in the composites on their surface. Of particular interest, we have found that the wettability for water can be switched between superhydrophobicity and superhydrophilicity by alternation of ultraviolet (UV) irradiation and dark storage with keeping a good oleophobicity on the modified surface treated with the anatase-type titanium oxide composite.