Conceptually new entries into cells

This article summarizes the background and a few preliminary results concerning project 7 of the NCCR Chemical Biology. The general objective is to explore new concepts for cellular uptake, membrane tunneling, sensing and labeling. Emphasis is on the use of dynamic covalent chemistry for counterion activation, slow release of polyions and fluorescent probes, and the generation of activator libraries and polyions that grow and shrink.     

Fabrication and Pore Size Control of Large-Pore Mesoporous Silica Particles through a Solvent Evaporation Process

Large-pore mesoporous silica particles were synthesized through a solvent evaporation process using hydrophobic fumed silica particles and tetraethyl orthosilicate (TEOS) as silica sources. The solvent evaporation of an ethanol solution of fumed silica particles, TEOS, HCl and triblock copolymer (F127) resulted in mesoporous silica particles with pores with sizes of about 7 nm. In addition, the interplanar spacing of the mesoporous silica particles can be controlled by changing the solvent evaporation temperatures.     

Analysis of proton exchange membrane fuel cell catalyst layers for reduction of platinum loading at Nissan

The biggest issue that must be addressed in promoting widespread use of fuel cell vehicles (FCVs) is to reduce the cost of the fuel cell system. Especially, it is of vital importance to reduce platinum (Pt) loading of catalyst layers (CLs) in the membrane electrode assembly (MEA) of a proton exchange membrane fuel cell (PEMFC). In order to lower the Pt loading of the MEA, mass transport of reactants related to the performance in high current density should be enhanced significantly as well as kinetics of the catalyst, which can result in the better Pt utilization and effectiveness. In this study, we summarized our analytical approach and methods for reduction of Pt loading in CLs. Microstructure, mass transport properties of the reactants, and their relation in CLs were elucidated by applying experimental analyses and computational methods. A simple CL model for I–V performance prediction was then established, where experimentally elucidated parameters of the microstructure and the properties in CLs were taken into account. Finally, we revealed the impact of lowering the Pt loading on the transport properties, polarization, and the I–V performance.     

Double layer capacitance of high surface area carbon nanospheres derived from resorcinol–formaldehyde polymers

Micro-mesoporous bimodal carbon nanospheres with high surface areas were synthesized by a combined use of surfactant templating technique and BaO₂ chemical activation one. Starting spherical nanopolymer/surfactant composites were prepared by the NaOH-catalyzed reaction of resorcinol (R) and formaldehyde (F) in the presence of cetyltrimethylammonium bromide (CTAB) as a core template and 1,3,5-trimethylbenzene (TMB) and tert-butanol (t-BuOH) as cosurfactants. After pretreatment with hydrochloric acid, the composite materials were calcined at 1000 °C in N₂ coexistent with varying weight ratios of BaO₂ to RF polymer ranging from 0 to 11. It produced micro-mesoporous bimodal carbon nanospheres of 124–143 nm diameter, with specific surface areas as high as 1884 m² g⁻¹ or up to 3301 m² g⁻¹, in contrast to microporous ones with smaller surface areas obtained at low BaO₂-loadings. The electrochemical double layer capacitance of the resulting nanocarbons in 0.5 M H₂SO₄ showed a marked increase with specific surface areas, up to as high as 219 F g⁻¹ for the highest surface area carbon material.     

Predictions of Munsell values with the same perceived lightness at any specified chroma irrespective of hues—Determination of any tonal colors

Simple formulas are proposed for predicting the Munsell value of colors with the same tone (the same values for whiteness‐blackness, perceived lightness, and chroma irrespective of hue). The formulas can be used for any tone. In other words, the method can determine the Munsell value with the same perceived lightness at any specified chroma irrespective of hue. The chromatic strength (CS) function is only used for the derivations. The formulas are very simple, and can be used not only in the colorimetry but also in the color design field. The concept described in this study is that a common CS function can be used for transforming each of the three color attributes (hue, lightness, and chroma) from their uniform color space metric to their corresponding color appearance space attribute. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2011     

Effects of additives on prebreakdown phenomena in n-hexane

Prebreakdown phenomena in n-hexane are observed in detail for positive and negative polarities by using simultaneously a high speed schlieren technique and an LED current measuring system, when an impulse voltage (1.1/225 μs) is applied to a point-to-plane electrode gap. Furthermore, the effects of several additives on the streamer propagation are investigated. Especially the effects of electron-trapping additives on negative streamer propagation and of low ionization potential additives on the positive streamer propagation, are examined, as is a correlation between the shape and the propagation velocity of the streamers     

Self-trapping of electrons in liquid nitrogen

A possibility of electron self trapping in nitrogen is discussed. It is found that electrons are free when injected in liquid N₂ near the triple point and localized inside bubbles and in the gaseous phase, far enough from the critical point. On the saturation line near the critical point a transition of electrons from bound to free states takes place     

Encapsulation-release property of amphiphilic hyperbranched d-glucan as a unimolecular reverse micelle

The synthesis of a novel unimolecular reverse micelle, the hyperbranched d-glucan carbamate (3), was accomplished through the carbamation reaction of the hyperbranched d-glucan (1) with the N-carbonyl l-leucine ethyl ester (2) in pyridine at 100 °C. Polymer 3 was soluble in a large variety of organic solvents, such as methanol, acetone, chloroform, and ethyl acetate, and insoluble in water, which remarkably differed from the solubility of 1. The degree of carbamate substitution (DS) for 3 was controlled by the feed rate of 2, and the DS values were in the range of 46.0-93.7%. Polymer 3 possessed the encapsulation ability for water-soluble molecules, such as rose bengal, thymol blue, and alizarin yellow in chloroform, and the encapsulation ability depended on the hydrophilicity of 3 and the molecular size of the dye. The rose bengal (RB) encapsulated polymer (RB/3) showed a slow release from the RB/3 system into water at neutral pH, while the release rate was significantly accelerated by the hydrolysis of the hydrophobic polymer shell under basic conditions.