Gel permeation chromatography using controlled-porosity glass. II. Polyacrylamide aqueous solutions

In a study of polyacrylamide in solutions we have required the rapid characterization on chromatographies. The application to the aqueous solution of the GPC using controlled-porosity glass has been examined from both the viewpoint of the effect of salt addition and the GPC mechanism. An adequate addition to neutral salt, 0.005M KCI to the eluent, gave rise to the elution behaviors being in accord with the hydrodynamic volume concept of the GPC separation.     

Residual shrinkage of UV-cured acrylate-jacketed optical fibres

UV-cured acrylate-jacketed optical fibres and nylon-jacketed optical fibres were heated up to 120°C and their changes in length measured. Experimental results show that residual strain of the acrylate-jacketed fibres is not caused by the temperature change of 20?120?20°C, while, for the nylon-jacketed fibres, compressive strain remains after the heat cycle. The strain is proportional to the cross-sectional area of the nylon layer.     

Temperature dependency of bound water of cellulose studied by a high-resolution NMR spectrometer

The widths at half-value of high-resolution NMR spectra of bound water of cellulose were studied in relation to the temperature change. Two points were made clear: First, the amount of bound water of the cellulose sample can be pointed out with higher accuracy the lower the temperature of the measurement. Second, it is possible to determine in a simple manner the boundary temperature T_c at which water molecules become bound by the cellulose. T_c is characteristic of the cellulose sample of a given water content and corresponds to the glass transition temperature of the water-containing sample. The measurements appear to be readily applicable to other hydrophilic polymers.     

Switched-Capacitor Track-and-Hold Amplifiers With Low Sensitivity to Op-Amp Imperfections

This paper describes high-precision switched-capacitor (SC) track-and-hold amplifier (THA) stages. They use a novel continuous-time correlated double sampling (CDS) scheme to desensitize the operation to amplifier imperfections. Unlike earlier predictive-CDS amplifiers, the circuits do not need a sampled-and-held input signal for their operation. During the tracking period, an auxiliary continuous-time signal path is established, which predicts the output voltage during the holding period. This allows accurate operation even for low amplifier gains and large offsets over a wide input frequency range. Extensive simulations were performed to compare the performance of the proposed THAs with earlier circuits utilizing CDS. The results verify that their operation is far more robust than that of any previously described SC amplifiers     

Assessing cardiovascular dynamics during ventricular assistance.Use of fuzzy clustering techniques

The authors' group has recently developed an expert system realized by means of fuzzy logic algorithms for monitoring and malfunction diagnosis of the left ventricular assist device (LVAD), one of the many types of artificial hearts developed today. The system is named TOTOMES (Tohoku University and Toyohashi University of Technology, monitoring and estimation system). TOTOMES is suitable for clinical application because it operates in an online and realtime fashion on a widely used personal computer in Japan. This article introduces the structure and function of the TOTOMES and explains its techniques, such as multi-interrupt tasks and dynamic system identification; as well as fuzzy reasoning used for realizing state estimation, detection, and diagnosis of malfunctions; and monitoring for cardiovascular dynamics under ventricular assistance and the LVAD drive system     

Pulmonary arterial impedance analysis by the use of the oscillated assist flow

Pulmonary arterial impedance is an important and interesting characteristic that can be used to evaluate the physiological properties of the pulmonary vessel. However, power spectrum analysis of the pulmonary artery pressure and flow pattern have suggested that peak power in the relatively high frequency range (> 10 Hz) is significantly low; thus, we cannot analyze the vessel properties in the high frequency range. In this study, we used the newly developed vibrating flow pump (VFP), which can generate oscillated blood flow with a relatively high frequency (10-50 Hz) for right heart bypass, to evaluate the pulmonary arterial impedance pattern in the high frequency range. Acute animal experiments of the right heart bypass from the right atrium to the pulmonary artery using 6 healthy adult goats were performed. The flow pattern and pressure of the pulmonary artery, electrocardiograms (ECGs), and arterial and right atrial pressures were continuously monitored during the experiments. Spectral analysis of the hemodynamic parameters using the fast Fourier transform (FFT) method was performed to evaluate the spectral properties. The coherence function, transfer function, and phase patterns were calculated to analyze the impedance pattern in the relatively high frequency area. Previously, various investigators had tried to analyze the impedance patterns of the pulmonary artery; however, they could not analyze the impedance patterns over 10 Hz because the spectral patterns of the pulmonary flow do not have high power at high frequencies. These physiological analyses may be useful in designing the optimal pulmonary circulation.     

Design of Deep-Sea Submarine Optical Fiber Cable

On designing optical fiber cable, it is necessary to deal with optical fiber weakness, such as small breaking elongation compared to metal materials and excess loss under both lateral and hydraulic pressure. This paper presents a structural design method for the submarine optical fiber unit and cable based on the study of both lateral and hydraulic pressure characteristics. This paper also clarifies that the fiber proof test level has been determined for new cables to be applied in sea areas 8000 m in depth.