Microstructures and bond strengths of plasma-sprayed hydroxyapatite coatings on porous titanium substrates

Hydroxyapatite (HA) coating was carried out by plasma spraying on bulk Ti substrates and porous Ti substrates having a Young’s modulus similar to that of human bone. The microstructures and bond strengths of HA coatings were investigated in this study. The HA coatings with thickness of 200–250 μ m were free from cracks at interfaces between the coating and Ti substrates. XRD analysis revealed that the HA powder used for plasma spraying had a highly crystallized apatite structure, while the HA coating contained several phases other than HA. The bond strength between the HA coating and the Ti substrates evaluated by standard bonding test (ASTM C633-01) were strongly affected by the failure behavior of the HA coating. A mechanism to explain the failure is discussed in terms of surface roughness of the plasma-sprayed HA coatings on the bulk and porous Ti substrates.     

Spin Injection Processes in ZnSe-Based Double Quantum Dots of Diluted Magnetic Semiconductors

Spin injection processes in the double quantum dots of ZnSe-based diluted magnetic semiconductors are discussed. Double quantum dots are fabricated from ZnSe-based double quantum wells by electron beam lithography and wet etching. In these samples, the photo-excited carriers in the magnetic dots are injected into the non-magnetic dots. The circular polarization degrees of photoluminescence from the non-magnetic dots are measured by micro-photoluminescence measurement system under the magnetic field up to 5 T. The maximum spin polarization degrees of injected carriers determined from our experiment are 10% for double quantum wells and 15% for double quantum dots. The spin injection efficiency was estimated both from the observed circular polarization degree and the diffusion length of carriers. We concluded that the spin injection efficiency is increased in the double quantum dots.     

Remote sensing of mechanical properties of materials using a novel ultrasound transducer and signal processing

An ultrasound-based remote sensing method to evaluate the mechanical properties of materials is presented. This method consists of a disk-shaped, piezoelectric transducer, operating at its resonance frequency, and a phase-shifted, feedback circuit. Mechanical parameters are derived by analyzing the signal contained in the phase-shifted values of the reflected signal. It is concluded that, using this novel transducer system and signal processing, remote mechanical measurements can be made. Such measurements obviate the need to apply the force-deformation approach and may be used to enable stiffness imaging.     

Volumetric Change and Surface Properties of Temperature-Sensitive Polyvinylalcohol (PVA) Hydrogel

Polyvinylalcohol (PVA) polymer gel is a temperature sensitive polymeric gel, with a critical transition temperature (with H₂O) of 310 K. At higher than 310 K, this temperature sensitive polymer gel shrinks because of discharging water, whereas at lower temperatures, the gel swelled because of absorbing water. The reversibility of the gel's volume change was confirmed by temperature swing. The adsorption behavior of an organic compound onto the PVA polymer gel in water was tested at various temperatures. The amount of adsorbed organic compound increased remarkably at temperatures higher than about 310 K. Then, it was confirmed that the organic compound in PVA polymer gel could be reversibly adsorbed and desorbed by a temperature change between 293 and 323 K. The mechanism of adsorption of the organic compound onto the PVA polymer gel could be explained by hydration and dehydration of polymer gel.     

Distal sensory axonopathy after sarin intoxication

A 51-year-old man inhaled sarin during a terrorist attack on the Tokyo subway system and died 15 months later. Neuropathologic examination revealed marked nerve fiber decrease in the sural nerve, moderate nerve fiber loss in the sciatic nerve, and unremarkable dorsal root ganglia, dorsal roots, and posterior column of the spinal cord. This pathology is consistent with dying-back degeneration of the peripheral nervous system and could represent a late sequela of sarin intoxication.     

Numerical Cracking and Debonding Analysis of RC Beams Reinforced with FRP Sheet

Bonding a fiber reinforced polymer (FRP) sheet to the tension-side surface of reinforced concrete (RC) structures is often performed to upgrade the flexural capacity and stiffness. Except for upper concrete crushing, FRP sheet reinforcing RC structure may fail in sheet rupture, sheet peeloff failure due to opening of a critical diagonal crack, or concrete cover delamination failure from the sheet end. Accompanying the occurrence of these failure modes, reinforcing effects of the FRP sheet will be lost and load-carrying capacity of the RC structures will be decreased suddenly. This study is devoted to developing a numerical analysis method by using a three-dimensional elasto-plastic finite element method to simulate the load-carrying capacity of RC beams failed in the FRP sheet peeloff mode. Here, the discrete crack approach was employed to consider geometrical discontinuities such as opening of cracks, slipping of rebar, and debonding of the FRP sheet. Comparisons between analytical and experimental results confirm that the proposed numerical analysis method is appropriate for estimating the load-carrying capacity and failure behavior of RC beams flexurally reinforced with a FRP sheet.     

Chemical potentials of oxygen for three-phase assemblages of CaSiO3(s) + Ca3Si2O7(s) + {CaO + SiO2 + FexO} melt and Ca3Si2O7(s) + Ca2SiO4(s) + {CaO + SiO2 + FexO} melt

By employing an electrochemical technique involving stabilized zirconia as solid electrolyte and Mo + MoO₂ mixture as reference electrode, the equilibrium oxygen partial pressures for three-phase assemblages of CaSiO₃(s) + Ca₃Si₂O₇(s) + {CaO + SiO₂ + Fe_xO} melt and Ca₃Si₂O₇(s) + Ca₂SiO₄(s) + {CaO + SiO₂ + Fe_xO} melt were determined as: - log {P_O2 (CS + C₃S₂ + L)/bar} = - 3.22 13000/(T/K) ± 0.05 - log {P_O2 (C₃S₂ + C₂S + L)/bar} = - 0.92 16400/ (T/K) ± 0.04. respectively, where CS, C₃S₂ and C₂S indicate CaSiO₃(s), Ca₃Si₂O₇(s). and Ca₂SiO₄(s), respectively.     

粉末冶金结构零件材料的泊松比

研究了粉末冶金机械零件使用的烧结材料的杨氏模量、切变模量及泊松比与孔隙度的关系.制备了三种钢粉,在不同条件下进行了压制、烧结与热处理.孔隙度对杨氏模量、切变模量及泊松比的影响最大.特别是泊松比还受孔隙形状的影响,而孔隙形状随粉末类型、烧结温度与烧结气氛及热处理条件而变化.对于大部分实际应用的粉末组成来说,烧结气氛对经烧结和热处理后材料的泊松比影响不大.对于部分预合金化粉末(Fe4%Ni1.5%Cu0.5%Mo)+0.8%石墨,只有在孔隙度低于20%时,烧结温度对泊松比与孔隙度的关系才有影响.在这种情况下.提出了烧结与热处理试样泊松比与孔隙度关系的较简单近似方程:在烧结温度1 423K下,v=0.300-0.266P+0.579P2;在烧结温度1 523K下,v=0.304-0.264P+0.548P2.     

Lipopolysaccharide primes human alveolar macrophages for enhanced release of superoxide anion and leukotriene B4: self-limitations of the priming response with protein synthesis

Human alveolar macrophages (AM) can produce potent reactive oxygen intermediates (ROI) and arachidonic acid metabolites (eicosanoids), which have important roles in host defense and the pathogenesis of some diseases of the lung. Bacterial lipopolysaccharide (LPS) is believed to cause profound lung injury and can prime mouse peritoneal macrophages for the enhanced secretion of ROI and eicosanoids. Therefore, we investigated the effect of LPS pretreatment on the ability of AM to release superoxide anions (O2-) and leukotriene B4 (LTB4). LPS can prime AM for the enhanced secretion of O2- and LTB4, regardless of whether they are derived from nonsmokers or smokers. Moreover, judging from the time-response characteristics, this priming for LTB4 release could be inhibited in the later stages of pretreatment, when the O2(-)-releasing capacity was enhanced. The priming inhibition was prevented, at least in part, by cycloheximide, but not by SOD and/or catalase. In addition, cycloheximide also inhibited the priming for O2- release. Hence, protein synthesis might be necessary for the priming for O2- release and for inhibiting the priming for LTB4 release. This phenomenon of self-limiting the priming response with LPS seems to be very important when we consider the high oxygen tension in the lungs and the many bacterial substances inspired into alveoli.     

Dual roles of proteasome in the metabolism of presenilin 1

Presenilin 1 (PS1) has been identified as a causative gene for most early-onset familial Alzheimer's disease. Biochemical studies revealed that PS1 exists predominantly as two processed fragments in cells and brain tissues. We prepared stably transfected cells expressing the wild-type and familial Alzheimer's disease-associated mutants of PS1 and investigated the enzyme that participates in the metabolism of PS1. After treatment of the cells with proteasome inhibitors, the full-length PS1 was significantly accumulated. The levels of N- and C-terminal fragments were also increased. The accumulation of PS1 with a deletion of exon 10, which is unable to be processed, on treatment of the transfected cells with lactacystin indicated that proteasome can degrade full-length PS1. A synthetic peptide that includes the processing region of PS1 was cleaved by 20S proteasome at the putative processing sites after Met288 and Glu299. Metabolic labeling experiments showed that the appearance of the N-terminal fragment was attenuated by the inhibitor. Finally, 28-kDa N- and 20-kDa C-terminal fragments were generated by purified PS1 in vitro. These data indicated that the proteasome pathway is involved in PS1 processing. These results demonstrate that the proteasome pathway plays dual roles in processing and degradation of PS1.