Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

The effects of R-75,317 on antiglomerular basement membrane glomerulonephritis in rats

Platelet-activating factor (PAF) is a potent inflammatory mediator which is released by various inflammatory cells and produced by certain tissues, including the kidney. PAF has been shown to increase glomerular permeability to protein and to decrease glomerular filtration rate (GFR) by contracting mesangium. On the basis of these observations, it has been suspected that PAF may play a role as mediator of glomerular damage in glomerular nephritis. To examine this possibility, we studied the effects of a specific PAF antagonist, R-75,317, on the development of an experimental model of anti-glomerular basement membrane (anti-GBM) glomerulonephritis. Glomerulonephritis was initiated by injecting rabbit anti-rat GBM serum into rats. Proteinuria gradually developed after serum injection, plateaued at week 2, and remained at the high level of week 2 throughout the experimental period (6 wk). Chronic treatment with R-75,317 (10 mg/kg/day i.p.) tended to delay the onset of proteinuria and significantly accelerated the recovery phase. Creatinine clearance (Ccr) fell to 40% at week 3. R-75,317 treatment completely prevented this decline of Ccr. Histological changes in this model (glomerular hypertrophy, proliferation of mesangial matrix and interstitial fibrosis) were also ameliorated by the R-75,317 treatment. The results suggest that PAF may play a role in the development of glomerulonephritis and that PAF antagonists could be used in the treatment of human renal disease. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, May 1989.     

Hypomorphic mutation in an essential cell-cycle kinase causes growth retardation and impaired spermatogenesis

Cdc7 kinase is essential for initiation of DNA replication. Cdc7(-/-) mouse embryonic stem (ES) cells are non-viable but their growth can be rescued by an ectopically expressed transgene (Cdc7(-/-)tg). Here we report that, despite the normal growth capability of Cdc7(-/-)tg ES cells, the mice with the identical genetic background exhibit growth retardation. Concomi tantly, Cdc7(-/-)tg embryonic fibroblasts (MEFs) display delayed S phase entry and slow S phase progression. Furthermore, spermatogenesis of Cdc7(-/-)tg mice is disrupted prior to pachytene stage of meiotic prophase I. The impairment in spermatogenesis correlates with the extremely low level of Cdc7 protein in testes, and is rescued by introducing an additional allele of transgene, which results in increase of Cdc7 expression. The increased level of Cdc7 also recovers the growth of Cdc7(-/-)tg MEFs and mice, indicating that the developmental abnormalities of Cdc7(-/-)tg mice are due to insufficiency of Cdc7 protein. Our results indicate the requirement of a critical level of a cell-cycle regulator for mouse development and provide genetic evidence that Cdc7 plays essential roles in meiotic processes in mammals.     

DRYING OF GRANULAR PARTICLES IN A MULTISTAGE INCLINED FLUIDIZED BED WITH MECHANICAL VIBRATION

A mathematical model for the drying rate of granular particles in a multistage inclined fluidized bed(IFB) is presented from the standpoint of simultaneous heat and mass transfer, with taking the effect of mechanical vibration added vertically into consideration.

Steady-state distributions for the temperatures and concentrations of the particles and the heating gas, and for the moisture content of the particles are numerically calculated based on the present model. The calculated results show fairly good agreement with the experimental data, which were obtained from the drying experiments of brick particles in a three-stage IFB using comparatively low temperature air(40-60°C) as the heating gas.

It has been found within the range of the experimental conditions employed that, the mechanical vibration added vertically enhances the over-all drying rate of the particles and its effect can be considered equivalent to an increase in the air velocity.     

Planned Leadtimes For Serial Production Systems

We investigate the problem of setting planned leadtimes in serial production systems when the actual leadtimes are stochastic. The objective is to minimize the sum of inventory holding costs, rescheduling costs arising from tardiness at intermediate stages of production, and tardiness of delivery to the customer.

A single-pass algorithm is developed which finds optimal solutions. The analytical models underlying the algorithm and extensive computational experience indicate that it is never optimal to have planned leadtimes of zero when there are rescheduling costs at intermediate stages of production. This also implies that unconditional immediate dispatching is not optimal under these conditions.     

Path tracking control of a manipulator considering torquesaturation

When the minimum-time trajectory of a manipulator along a geometrically prescribed path is planned taking into consideration the manipulator's dynamics and actuator's torque limits, at least one of the joints should be at the torque limit. The execution of such a trajectory by a conventional feedback control scheme results in torque saturation. Consequently, the tracking error cannot be suppressed and the manipulator may deviate from the desired path. In this paper, the author's propose a feedback control method for path tracking which takes the torque saturation into account. Based on the desired path, a coordinate system called path coordinates is defined. The path coordinates are composed of the component along the path and the components normal to the path. The equation of motion is described in terms of the path coordinates. Control of the components normal to the path is given priority in order to keep the motion of the manipulator on the path. Simulations of a two-degree-of-freedom manipulator show the effectiveness of this method     

Antigenic and genetic diversities of Babesia ovata in persistently infected cattle

Exploring the antigenic and genetic diversities of Babesia ovata, we obtained several field isolates from grazing cattle in the Okushiri island, Japan. Parasite isolation was greatly facilitated by using bovine red blood cell-substituted SCID mice (Bo-RBC-SCID mice), into which the blood samples of the cattle were inoculated. Isolates from different individuals within a herd of cattle were compared in immunoblot analysis with an anti-B. ovata serum and also in Southern blot analysis with a probe for the small subunit ribosomal RNA gene. In both analyses, the isolates exhibited banding patterns that were significantly different from each other. We were also able to obtain a series of parasite isolates from a single cow in different seasons of a nine months period, including winter when active vector ticks were not in the field environment. Different seasonal isolates showed different banding patterns in both immunoblot and Southern blot analyses. By contrast, these analyses detected little difference among the parasites that had been passed various times in Bo-RBC-SCID mice, where no specific immune responses should be generated. These results indicate that individual animals within a herd of cattle were infected with antigenically and genetically diversified populations of B. ovata, and that the parasites could persistently infect a single animal with dynamic change in their predominant subpopulations.     

An effect of microstructure on the interface resistance between a perovskite-type oxide electrode and yttria-stabilized zirconia

The electrode characteristics of perovskite-type oxides, La_0.6Sr_0.4CoO₃ and La_0.6Sr_0.4MnO₃, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La_0.6Sr_0.4MnO₃ electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance.     

Roles of the JAK-STAT system in signal transduction via cytokine receptors

JAK-STAT signaling pathways are known to play an essential role in the specific activation of interferon-inducible genes. Many cytokines interacting with the cytokine receptor superfamily also appear to activate these pathways. Recent evidence indicates that JAKs play an essential role(s) in cytokine receptor signaling, including both specific pathways linked to STATs and general pathways regulating cell growth and functions.