采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

Improvement in photo-alignment efficiency of azobenzene-containing polyimide films

We have investigated the photo-induced in-plane anisotropy of the films of two different polyimides (PIs) containing azobenzene in the backbone structure (Azo-PIs), which were synthesized from the same diamine, 4, 4′-diaminoazobenzene (DAAB), and two different dianhydrides, pyromellitic dianhydride (PMDA) or oxydiphthalic anhydride (ODPA). Under the same photo-alignment condition, the in-plane anisotropy of the ODPA–DAAB PI film was significantly larger than that of the PMDA–DAAB PI film. This result shows that the photo-alignment efficiency of the former is higher than that of the latter; i.e. the photo-alignment efficiency of Azo-PI can be improved by changing the backbone structure. We believe that the observed enhancement in the photo-alignment efficiency is attributed to a lowering of the polymer chain rigidity, which is caused by introducing an ether linkage with free rotation around non-parallel bonds into the dianhydride part.     

Precipitation control of calcium phosphate on pure magnesium by anodization

Calcium phosphate precipitated on pure magnesium from artificial plasma (modified Hanks’ solution) was varied by anodization and autoclaving, aiming the control of corrosion rate of bioabsorbable magnesium. Rough and smooth anodized film was formed depending on anodizing voltage in 1 N NaOH. The amount of calcium phosphate precipitated on the porous film was 2-3 times larger than that on the smooth film. The Ca/P ratio on the porous film was slightly higher than that on the smooth film. The autoclaving did not significantly influence the morphology of anodized film; however, the precipitation of calcium phosphate was restricted. No significant local corrosion occurred after the immersion in modified Hanks’ solution. It is demonstrated that the precipitation of calcium phosphate on magnesium can be controlled by anodization and autoclaving.     

Influence of magnetic fields on turbo-molecular pumps

Recently, turbo-molecular pumps (TMPs) have been widely used in nuclear fusion devices and sometimes used in particle accelerators. In order to use them in the quasi-static magnetic field often employed in these devices, the influence of these fields on TMPs was investigated in detail.First of all, the influence of two special magnetic fields was examined, a magnetic field orthogonal to the TMP, and one which was parallel. The parallel magnetic field had no influence on the operation of the TMP. On the other hand, the driving power and the rotor temperature were greatly affected by the vertical magnetic field. The eddy current loss in the vertical field increased rapidly with the field strength, proportionally to the square of the field strength. The eddy current loss also increased with the rotation frequency; however, it was roughly proportional to the square root of the frequency at higher frequencies. These dependences are well explained by the skin depth, which indicates the region beneath the surface of the rotor where a localized magnetic field and current flow exist.Then, we successfully calculated the influence of a magnetic field in an arbitrary direction by adding the contributions from the above two magnetic components. Furthermore, experiment revealed that a magnetic field with symmetry around the rotor axis does not affect the operation of the TMP.     

Electrochemical degradation of phenol using electrodes of Ti/RuO(2)-Pt and Ti/IrO(2)-Pt

Electrochemical degradation of phenol was evaluated at two typical anodes, Ti/RuO(2)-Pt and Ti/IrO(2)-Pt, for being a treatment method in toxic aromatic compounds. The influences of current density, dosage of NaCl, initial phenol concentration on electrochemical phenol degradation were investigated. It was found that Ti/RuO(2)-Pt anode had a higher oxygen evolution potential than Ti/IrO(2)-Pt anode, which will increase the current efficiency for electrochemical degradation, and the instantaneous current efficiency (ICE) was relatively higher at the initial time during phenol electrolysis. HOCl formed during electrolysis would play an important role on the oxidation of phenol. For the Ti/RuO(2)-Pt anode, phenol concentration decreased from around 8mg/L to zero after 30min of electrolysis with 0.3g/L NaCl as supporting electrolyte at the current density of 10mA/cm(2). Although phenol could be completely electrochemical degraded at both Ti/RuO(2)-Pt and Ti/IrO(2)-Pt anodes, phenol degradation was slower at the Ti/IrO(2)-Pt anode than at the Ti/RuO(2)-Pt anode due to the fact that passivation was to be found at the Ti/IrO(2)-Pt anode.     

Development of a homogeneous competitive immunoassay for phosphorylated protein antigen based on the enhanced fluorescence resonance energy transfer technology

We describe a homogeneous competitive immunoassay for a phosphorylated protein antigen. The assay takes advantage of the enhanced fluorescence resonance energy transfer (FRET) technology, which has a unique characteristic that the FRET signal is increased by the specific interaction of two fluorolabeled leucine zippers. We chose extracellular signal-regulated kinase (ERK) as a model antigen and constructed two molecular probes in which either anti-phosphorylation site antibody or the antigen peptide was chemically conjugated to the enhanced FRET probes. While these molecular probes indicated sufficient FRET signal without antigen, they displayed a significant change in the fluorescent spectrum by mixing with phosphorylated antigens. With this competitive enhanced FRET immunoassay, a phosphorylated ERK concentration within the range from 15 nM to 250 nM could be determined. Because the assay is very simple, it would be applied to not only in vitro assay but also in vivo detection of protein phosphorylation.     

Investigation of UV-A light irradiation on tomato fruit injury during storage

We investigated the effect of UV-A light (wavelength 315 to 400 nm) irradiation during storage on tomato fruit injury. Mature green tomato fruit (cv. House Momotaro) were exposed to UV-A at doses of 0.02, 0.5, and 2 mW x cm(-2) throughout storage at 25 degrees C. The physiological disorders, fruit ripening, superoxide dismutase (SOD) activity, and increases in fruit temperature were evaluated. All UV-A-irradiated and nonirradiated tomatoes developed a full red color at the same time (2 weeks). Irradiated fruit ripened normally, and exposure of tomato fruits to UV-A did not lead to the discoloration of ripe tomato fruit at any dosage. The fruit temperature did not increase in response to various UV-A light doses and exposure times, and none of the UV-irradiated fruits showed physiological disorders (dull skin blemish, pitting). The SOD activity of UV-A-irradiated fruit exposed to the various UV-A doses did not significantly (P = 0.05) differ from that of fruit stored in dark conditions. The SOD results imply that UV-A light might not induce reactive oxygen species in UV-A-irradiated fruit.     

Interactions between nano-spacing flying head sliders and ultra-thin liquid lubricant films with non-uniform distribution in hard disk drives

This paper describes the effect of ultra-thin liquid lubricant films on air bearing dynamics and flyability of less than 10 nm spacing flying head sliders in hard disk drives. In particular, the effect of non-uniform lubricant film distributions on head/disk interface dynamics are studied. The disks with lubricant on one half of disk surface thicker than the other half were used in this study. The dynamics of sliders is monitored using acoustic emission (AE) and the interactions between the slider and disk are investigated experimentally. The disks were also examined with a scanning micro-ellipsometer before and after each test. Complicated slider responses were observed and clarified. In addition, it was found that the periodic lubricant film thickness modulations or non-uniformity caused by the slider-disk contact interactions could be observed. It is suggested that this lubricant film thickness non-uniformity will be one of the technical issues in order to achieve ultra-low head/disk contact interface of less than 10 nm.     

An agent architecture for strategy-centric adaptive QoS control in flexible videoconference system

In this paper, we propose an agent architecture to improve flexibility of a videoconference system with strategy-centric adaptive QoS (Quality of Service) control mechanism. The proposed architecture realizes more flexibility by changing their QoS control strategies dynamically. To switch the strategies, system considers the properties of problems occurred on QoS and status of problem solving process. This architecture is introduced as a part of knowledge base of agent that deals with cooperation between software module of videoconference systems. We have implemented the mechanism, and our prototype system shows its capability of flexible problem solving against the QoS degradation, along with other possible problems within the given time limitation. Thus we confirmed that the proposed architecture can improve its flexibility of a videoconference system compared to traditional systems. Takuo Suganuma, Dr.Eng.: He is a research associate of Research Institute of Electrical Communication of Tohoku University. He received a Dr.Eng. degree from Chiba Institute of Technology in 1997. His research interests include agent-based computing and design methodology for distributed systems. He is a member of IPSJ, IEICE and IEEE. SungDoke Lee: He is a Ph.D. Student in the Graduate School of Information Sciences in Tohoku University. He received his MEng degree at Chonbuk National University, Korea in 1991. His research interests include Flexible Network and Knowledge of Agent. Tetsuo Kinoshita, Dr.Eng.: He is an associate professor of Research Institute of Electrical Communication of Tohoku University. He received a Dr.Eng. degree in information engineering from Tohoku University, Japan. His research interests include knowledge engineering, cooperative distributed processing and agent-based computing. He received the the IPSJ Best Paper Award in 1997, etc. He is a member of IPSJ, IEICE, JSAI, AAAI, ACM and IEEE. Norio Shiratori, Dr.Eng.: After receiving his Dr.Eng degree at Tohoku University, he joined the Research Institute of Electrical Communication of Tohoku University in 1977, and is now a professor at the same University. He has been engaged in research on distributed processing system, and flexible intelligent network. He received the 25th Anniversary of IPSJ Memorial Prize-Winning Paper Award in 1985, the 6th Telecommunications Advancement Foundation Incorporation Award in 1991, the Best Paper Award of ICOIN-9 in 1994, the IPSJ Best Paper Award in 1997, etc. He has been named a Fellow of the IEEE for his contributions to the field of computer communication networks.     

Investigation of mechanism of smear formation from diamond-like carbon films on heating

Microsystem Technologies - The formation of head smears during the heat-assisted magnetic recording is a significant problem that must be addressed to ensure the reliability of the head-disk...