Evidence that the cannabinoid CB1 receptor is a 2-arachidonoylglycerol receptor. Structure-activity relationship of 2-arachidonoylglycerol, ether-linked analogues, and related compounds

An endogenous cannabimimetic molecule, 2-arachidonoylglycerol, induces a rapid, transient increase in intracellular free Ca2+ concentrations in NG108-15 cells through a cannabinoid CB1 receptor-dependent mechanism. We examined the activities of 24 relevant compounds (2-arachidonoylglycerol, its structural analogues, and several synthetic cannabinoids). We found that 2-arachidonoylglycerol is the most potent compound examined so far: its activity was detectable from as low as 0.3 nM, and the maximal response induced by 2-arachidonoylglycerol exceeded the responses induced by others. Activities of HU-210 and CP55940, potent cannabinoid receptor agonists, were also detectable from as low as 0.3 nM, whereas the maximal responses induced by these compounds were low compared with 2-arachidonoylglycerol. Anandamide was also found to act as a partial agonist in this assay system. We confirmed that free arachidonic acid failed to elicit a response. Furthermore, we found that a metabolically stable ether-linked analogue of 2-arachidonoylglycerol possesses appreciable agonistic activity, although its activity was apparently lower than that of 2-arachidonoylglycerol. We also confirmed that pretreating cells with various cannabinoid receptor agonists nullified the response induced by 2-arachidonoylglycerol, whereas pretreating cells with other neurotransmitters or neuromodulators did not affect the response. These results strongly suggested that the cannabinoid CB1 receptor is originally a 2-arachidonoylglycerol receptor, and 2-arachidonoylglycerol is the intrinsic physiological ligand for the cannabinoid CB1 receptor.     

Characteristics of vertical earth potential difference signals

A modified measurement method to observe the electric earth potential difference is proposed in order to reduce the unnecessary signals induced by artificial and natural earth current sources. With this method, the potential difference is measured as the voltage between two electrodes that are buried in different vertical positions beneath the ground. We evaluated this method at four sites under different measurement conditions and we discuss the characteristic features of the three types of observed signals: (1) Horizontal earth potential difference signals appear according to the current induced by variations in geomagnetic fields. Vertical signals, however, do not appear because there is no induced vertical current. (2) After heavy rainfall the characteristic quasi-periodic pulse train signal occasionally appears. However, no such signal can be found in the horizontal direction. (3) Pulse signals appear with exactly the same period that could be expected to be caused by artificial current sources from structures and buildings. Consequently, in order to use this vertical observation method effectively, we should choose a location where the ground surface is as level as possible and which is as far as possible from current source points. © 1998 Scripta Technica, Electr Eng Jpn, 123(1): 23–31, 1998     

TEM analysis of high temperature annealed W nanostructure surfaces

Helium plasma irradiation and electron heating experiments were conducted using tungsten in the divertor simulator NAGDIS-II. Helium plasma irradiation to tungsten led to the formation of nanostructures on the surface, while the nanostructures were annihilated after the potential of the specimen was changed to positive for several 10 min so that electrons irradiated the sample without ion irradiation. The specimens were analyzed in detail by transmission electron microscope with the help of focused ion beam technique. It is revealed that the helium nano-bubbles still remained even after the nanostructures were disappeared from the surface. Porosity of the nanostructured tungsten was measured from the TEM images.     

Remote field eddy current testing for steam generator inspection of fast reactor

We confirmed the defect detection performances of the remote field eddy current testing (RFECT) in order to inspect the helical-coil-type double wall tube steam generator (DWTSG) with the wire mesh layer for the new small fast reactor 4S (Super-Safe, Small and Simple). As the high sensitivity techniques, we tried to increase the direct magnetic field intensity in the vicinity of the inner wall of the tube and decrease the direct magnetic field around the central axis of the tube using the exciter coil with the flux guide made of the iron–nickel alloy. We adopted the horizontal type multiple detector coils with the flux guides arrayed circumferentially to enhance the sensitivity of the radial component. According to the experimental results, the output voltage of the detector coil in the region of indirect magnetic field increased more than 100 times by the application of the exciter and detector coils with the flux guides. Finally, we were able to detect the small hole defect of 1 mm in diameter and 20% of the outer tube thickness in depth over the wire mesh layer by the adoption of the exciter coil and horizontal type multiple detector coils with the flux guides. We also confirmed that the RFECT probe is useful for detecting thinning defects. These experimental results indicated that there is the possibility that we can inspect the double wall tube with the wire mesh layer using the RFECT.     

Effect of Moisture on the High-Temperature Stability of Unidirectionally Solidified Al2O3/YAG Eutectic Composites

The corrosion resistance of a unidirectionally solidified alumina/yttrium aluminum garnet (Al₂O₃/YAG) eutectic mixture was investigated at high temperature. Samples were exposed to high temperature (1200°–1800°C) in different atmospheres, which included argon, argon/water vapor, air, and air/water vapor. The most important microstructural changes occurred at the interface between the YAG and the Al₂O₃. Those changes consisted of localized thermal grooving, especially when the corrosive atmosphere contained water vapor. The samples exhibited significant weight loss at high temperature (1800°C) after 20 h of exposure. The calculated volume gain that was induced by the increased surface relief was low and limited, except when the corrosive atmosphere contained air, which indicated that the presence of air (particularly oxygen) induced a more-active corrosion process. On the other hand, no change in the flexural strength was observed, even after 100 h at 1800°C in a humid atmosphere, because of the cross-linked structure of the composite, which limited propagation of the groove.     

The Impact of Duodenal Mucosal Vulnerability in the Development of Epigastric Pain Syndrome in Functional Dyspepsia

An unidentified cause of functional dyspepsia (FD) is closely associated with medication resistance. Acid suppression is a traditional and preferential method for the treatment of FD, but the efficacy of this treatment varies between epigastric pain syndrome (EPS) and postprandial syndrome (PDS): it is efficient in the former but not much in the latter. Transepithelial electrical resistance (TEER), a surrogate of mucosal barrier function, was measured under pH 3 and pH 5 acidic conditions using duodenal biopsy specimens obtained from the patients with EPS and PDS and asymptomatic healthy controls. The infiltration of inflammatory cells to the duodenal mucosa was accessed by immunohistochemical analysis. The duodenal mucosal TEER in EPS patients was decreased by exposure to the acidic solution compared to that of the controls and the PDS patients. The decrease in TEER of the EPS patients was observed even under pH 5 weak acidic condition and was correlated to degree of the epigastric pain. Moreover, the duodenal mucosa of EPS patients presented an increase in mast cells and plasma cells that expressed Ig-E. Duodenal mucosal vulnerability to acid is likely to develop EPS.     

Temperature-responsive characteristics of N-isopropylacrylamide-grafted polymer films prepared by photografting

Photografting of N-isopropylacrylamide (NIPAAm) on ethylene–vinyl alcohol copolymer films (thickness = 15,20, and 25 μm) and low-and high-density polyethylene films (thickness = 30 μm) was carried out at 60°C in a water medium. Xanthone was used as a photoinitiator by coating it on the film samples. The resultant NIPAAm-grafted films exhibited a temperature-responsive character, which was evaluated by measuring a dimensional change of the grafted films. The grafted films swelled and shrank in water at temperatures lower and higher than around 30°C, respectively. The character was found to be reversible between 0 and 50°C. It was observed that the extent of the character is largely influenced by film thickness, location of NIPAAm-grafted chains, and crystallinity of film substrate. © 1994 John Wiley & Sons, Inc.     

A comprehensive economic analysis of biomass gasification systems

This paper presents a comprehensive economic analysis of biomass gasification systems. There has recently been interest in promoting biomass energy systems in Japan's domestic sector. However, there are problems in achieving this project. The costs of plant construction are very high compared with conventional plants. Accordingly, the unit costs of electricity will be increased to levels comparable with those of other environmental energy systems. Copyright © 2004 Wiley Periodicals, Inc. In this paper, biomass energy systems using woody biomass are proposed from the viewpoint of successful environmental business. Biomass integrated gasification combined cycle (BIGCC) plants operated by independent power producers and biomass gasification cogeneration (BGCGS) plants in sawmills or asphalt‐concrete production factories have the potential for implementation in the near future. Our analysis concludes that the systems proposed in this paper provide the following outcomes with subsidies: (1) the generating cost of BIGCC ranges from 15.1 to 36.6 yen/kWh, (2) the generating cost of BGCGS ranges from 2.6 to 32.2 yen/kWh, and (3) the cost reduction of BGCGS products in asphalt factories amounts to about 60 million yen per year. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 52–63, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20089     

Sapphire matrix composites reinforced with single crystal YAG phases

An investigation of fabrication technology on eutectic composites consisting of Al₂O₃ phases and YAG (Y₃Al₅O₁₂) phases was carried out by applying the unidirectional solidification process. Unidirectionally solidified eutectic composites consisting of 110 sapphire phases and 420 single crystal YAG phases could be fabricated successfully by lowering a Mo crucible at a speed of 5 mm h^–1 under a pressure of 10^–5 mmHg of argon. These eutectic composites have excellent high-temperature properties up to 1973 K. For example, the flexural strength is 360–500 MPa independent of testing temperature from room temperature to 1973 K. Oxidation resistance at 1973 K in an air atmosphere is superior to SiC and Si₃N₄ and the microstructure of these eutectic composites is stable even after heat treatment at 1773 K for 50 h in an air atmosphere.     

Effects of Addition of Na and S to Alumina Catalyst for the Selective Reduction of Nitrogen Monoxide with Ethene in Excess Oxygen

The addition of Na and S into alumina catalysts brought about a decrease in the catalytic activity for the reduction of NO with ethane in excess oxygen. Aluminas containing Na or S in different amounts were subjected to activity tests for the related reactions to elucidate the causes of the suppressive effects of the addition of Na and S on the reduction of NO. The reactions taken as test reactions were the oxidation of NO with oxygen, the reaction of NO₂ with ethene in the absence of oxygen, and the reaction of ethene with oxygen. The addition of Na suppressed the oxidation of NO, and the reaction of NO₂ with ethene to form N₂, but promoted the reaction of ethene with oxygen to a great extent. The addition of Na also caused the formation of NO in the reaction of NO₂ with ethene. The changes which the addition of Na brought about are all unfavorable directions for the reduction of NO. The most important effect of the addition of Na on the decrease in the reduction of NO is suggested to be due to the enhancement of the reaction of ethene with oxygen. The addition of S suppressed the oxidation of NO to a great extent, but did not affect much the reaction of ethene with oxygen. Like the case of the Na addition, the addition of S caused the formation of NO in the reaction of NO₂ with ethene.