Shelf-life time test of p- and n-channel organic thin film transistors using copper phthalocyanines

P- and n-type channel thin film transistors (OTFTs) were fabricated by using hexadecahydrogen copper phthalocyanine (H₁₆CuPc) and hexadecafluoro copper phthalocyanine (F₁₆CuPc) molecules, respectively. Top-contact and bottom-contact source-drain configurations were used for both semiconductors. Furthermore, the temperature and film thickness dependences on the mobility values were measured in the saturation regime of source-drain current. Unipolar mobilities in such single-layer OTFTs were correlated to thin film morphology by X-ray diffraction analysis and atomic force microscopy measurements. Shelf-life time tests of p-type and n-type OTFTs are detailed as OTFT configuration and substrate temperature dependence over a time period of 100 days.     

Influence of effective surface area on gas sensing properties of WO3 sputtered thin films

WO₃ thin films having different effective surface areas were deposited under various discharge gas pressures at room temperature by using reactive magnetron sputtering. The microstructure of WO₃ thin films was investigated by X-ray diffraction, scanning electron microscopy, and by the measurement of physical adsorption isotherms. The effective surface area and pore volume of WO₃ thin films increase with increasing discharge gas pressure from 0.4 to 12 Pa. Gas sensors based on WO₃ thin films show reversible response to NO₂ gas and H₂ gas at an operating temperature of 50-300 °C. The peak sensitivity is found at 200 °C for NO₂ gas and the peak sensitivity appears at 300 °C for H₂ gas. For both kinds of detected gases, the sensor sensitivity increases linearly with an increase of effective surface area of WO₃ thin films. The results demonstrate the importance of achieving high effective surface area on improving the gas sensing performance.     

All solid-state sheet battery using lithium inorganic solid electrolyte, thio-LISICON

All solid-state sheet lithium battery was developed using inorganic solid electrolyte, thio-LISICON (Li_3.25Ge_0.25P_0.75S₄), Li–Al anode, and Mo₆S₈ cathode materials, and the sheet manufacturing process was established. The new sheet-configuration was consisted of the cathode with the grid of current collector, electrolyte sheet with or without mechanical support, and aluminum/lithium composite sheet anode. A sheet battery with a dimension of 30 mm × 30 mm showed good charge–discharge characteristics without any capacity fading at a current of 0.1 mA.     

Improved method to simulate gradient in alumina packing fraction in alumina/epoxy composite fabricated by a centrifugal method

A centrifugal method was used to fabricate large‐scale functionally graded materials (FGMs) from solid‐particles/viscous‐matrix mixtures at room temperature. The conventional simulation procedure of the centrifugal process was improved by considering the dependency of the viscosity η of the mixture on the packing fraction ν_p of particle, the effects of arbitrary shape of the actual fillers on η, the statistical dispersion of the diameters of the actual fillers, and the formation and growth of the fully packed layer (FPL) near the FGM bottom. The new simulation method was applied to three centrifugal processes employed for experimental FGM fabrications from alumina/epoxy mixtures. The numerical profiles of ν_p are in good agreement with the experimental ones regardless of the shapes of fillers and 'ponding viscosity of the solutions without fillers, the total amount of fillers loaded, and the centrifugal conditions. The saturating nature of ν_p near the far end of the FGM column is also simulated with reasonable precision. Finally, the manner in which the particles exert varying influences on the gradient of ν_p is demonstrated: the particles exhibit different movements depending on their size. On the basis of these results, the effectiveness of the new simulation method proposed is confirmed for the modeling of similar processes involved in the fabrication of FGMs from solid‐particles/viscous‐matrix mixtures by the centrifugal method. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Thermal spray coating on conductor rolls in electroplating line

In electroplating lines,many conductor rolls are installed in electroplating bath.Typical electroplatings are tin plating(ETL) and zinc plating(EGL),and from required product qualities,a vertical cell for the former and a horizontal cell for the latter is often used.Generally,chrome plating or WC cermet thermal spray coating is applied to stainless steel conductor roll in ETL for prolonging service life by improvement of wear resistance and corrosion resistance.On the other hand,Hastelloy type alloy subs...     

Effect of Hypoxia on Pulmonary Endothelial Cells from Bleomycin-Induced Pulmonary Fibrosis Model Mice

Pulmonary fibrosis is a progressive and fatal disorder characterized by dysregulated repair after recurrent injury. Destruction of the lung architecture with excess extracellular matrix deposition induces respiratory failure with hypoxia and progressive dyspnea. The impact of hypoxia on pulmonary endothelial cells during pulmonary fibrogenesis is unclear. Using a magnetic-activated cell sorting system, pulmonary endothelial cells were isolated from a mouse model of pulmonary fibrosis induced by intratracheally administered bleomycin. When endothelial cells were exposed to hypoxic conditions, a hypoxia-inducible factor (HIF)-2α protein was detected in CD31- and α-smooth muscle actin (SMA)-positive cells. Levels of plasminogen activator inhibitor 1, von Willebrand factor, and matrix metalloproteinase 12 were increased in endothelial cells isolated from bleomycin-treated mice exposed to hypoxic conditions. When endothelial cells were cultured under hypoxic conditions, levels of fibrotic mediators, transforming growth factor-β and connective tissue growth factor, were elevated only in endothelial cells from bleomycin-treated and not from saline-treated lungs. The increased expression of α-SMA and mesenchymal markers and collagen production in bleomycin- or hypoxia-stimulated endothelial cells were further elevated in endothelial cells from bleomycin-treated mouse lungs cultured under hypoxic conditions. Exposure to hypoxia damaged endothelial cells and enhanced fibrogenesis-related damage in bleomycin-treated pulmonary endothelial cells.     

Potent Activation of Human but Not Mouse TRPA1 by JT010

Transient receptor potential (TRP) ankyrin repeat 1 (TRPA1), which is involved in inflammatory pain sensation, is activated by endogenous factors, such as intracellular Zn²⁺ and hydrogen peroxide, and by irritant chemical compounds. The synthetic compound JT010 potently and selectively activates human TRPA1 (hTRPA1) among the TRPs. Therefore, JT010 is a useful tool for analyzing TRPA1 functions in biological systems. Here, we show that JT010 is a potent activator of hTRPA1, but not mouse TRPA1 (mTRPA1) in human embryonic kidney (HEK) cells expressing hTRPA1 and mTRPA1. Application of 0.3–100 nM of JT010 to HEK cells with hTRPA1 induced large Ca²⁺ responses. However, in HEK cells with mTRPA1, the response was small. In contrast, both TRPA1s were effectively activated by allyl isothiocyanate (AITC) at 10–100 μM. Similar selective activation of hTRPA1 by JT010 was observed in electrophysiological experiments. Additionally, JT010 activated TRPA1 in human fibroblast-like synoviocytes with inflammation, but not TRPA1 in mouse dorsal root ganglion cells. As cysteine at 621 (C621) of hTRPA1, a critical cysteine for interaction with JT010, is conserved in mTRPA1, we applied JT010 to HEK cells with mutations in mTRPA1, where the different residue of mTRPA1 with tyrosine at 60 (Y60), with histidine at 1023 (H1023), and with asparagine at 1027 (N1027) were substituted with cysteine in hTRPA1. However, these mutants showed low sensitivity to JT010. In contrast, the mutation of hTRPA1 at position 669 from phenylalanine to methionine (F669M), comprising methionine at 670 in mTRPA1 (M670), significantly reduced the response to JT010. Moreover, the double mutant at S669 and M670 of mTRPA1 to S669E and M670F, respectively, induced slight but substantial sensitivity to 30 and 100 nM JT010. Taken together, our findings demonstrate that JT010 potently and selectively activates hTRPA1 but not mTRPA1.     

Competitive interaction of polyanions and anionic dye with bovine serum albumin

The binding of anionic dye, p-(2-amino-6-sulfonyl-8-naphthylazo)benzene sulfonic acid disodium salt (ASANA) to bovine serum albumin (BSA) at pH 7.5 has been studied by spectrophotometric techniques. The values of the dissociation constants were obtained with the use of the Benesi-Hildebrand equation for ASANA. Competitive binding of polyanions, sodium poly(styrene sulfonate) (PSSNa), potassium poly(vinyl sulfonate) (PVSK), poly(acrylic acid) (PAA), and poly(methacrylic acid) (PMAA) and anionic dye to BSA was evaluated through the variations in the different spectra of BSA-dye-polymer systems.     

Examination of simple analytical method for calculating 60-Hz magnetic field in power substations

In the last decade, increasing attention has been paid to ELF (Extremely Low Frequency) electromagnetic environments in work areas as well as in and near homes, regarding their interaction both with electric apparatus such as CRT's and with biological systems. Experimental and theoretical analyses are presented of 60 Hz magnetic field (B-field) characteristics at and near ground level in both 187/66-kV EHV and 66/6.6-kV HV power substations. Experimental results of B-field profiles along horizontal paths as well as harmonic contents in B-field waveforms at several positions are shown and discussed. Furthermore, analytical B-field profiles calculated by using a B-field approximation method based on Biot-Savart law are shown and compared with the measured ones. The comparisons verify that the assumptions employed are applicable to the substation B-field calculation, and that the B-field calculation method employed can estimate B-field in EHV and HV power substation to significant accuracy, except for areas where localized B-field sources, such as power transformers and underground power cables, exist. The analytical profiles of three orthogonal components of B-field are also described in terms of equiflux contour maps, which show 3-D characteristics of B-field in power substations.