The relationship between real poles and real zeros in SISO sampleddata systems

A relationship between real poles and real zeros of SISO (single-input, single-output) sampled data systems is presented, which is independent of the sampling period. The relation is stated in terms of a parity property involving the number of real zeros between any two real poles. This property allows the investigation of conditions for the preservation of stable or unstable zeros under sampling. A sufficient condition for stability of a sampled system with a continuous-time plant having all real zeros, and a sufficient condition for instability of a two-sampled system with an unstable plant is developed     

Influence of the methyl group on the dielectric constant of boron carbon nitride films containing it

LSI interconnect insulators made using low dielectric constant (low-k) materials are required for high performance devices with a small RC delay. We investigated a boron carbon nitride film containing the methyl group (Me–BCN) using tris-di-methyl-amino-boron (TMAB: B[N(CH₃)₂]₃) gas as a low-k material. In addition, we studied the influence of the methyl group on the dielectric constant (k-value) and the properties of the Me–BCN films. It was found that the k-value of the Me–BCN films decreases with increasing number of C–H bonds due to the methyl group (CH₃). The number of O–H bonds due to water incorporation is suppressed by increasing the number of C–H bonds. Consequently, we suggested that a lower k-value can be realized by the suppression of water invasion by a hydrophobic surface due to methyl bonds. Thus, the control of the methyl group is important to achieve a low-k material using Me–BCN films.     

Rapid somatic growth after birth in children with neuroblastoma: A survey of 1718 patients with childhood cancer in Kyushu-Okinawa district

OBJECTIVE: To evaluate the association of somatic growth from birth through diagnosis with the development of childhood cancer. METHODS: The weights and heights of 1718 children with cancers were determined and converted into standard deviation (SD) scores, both at birth and at diagnosis, by using the means and SD values of the general population. RESULTS: Among patients with neuroblastoma and acute lymphoblastic leukemia, the percentages of children with body weight and height over mean + 2 SDs were significantly higher at diagnosis than the expected value in the general population. The percentage of children with neuroblastoma and body weight over mean + 2 SD increased significantly from birth through diagnosis (P =.04). Although the medians of weight SD scores decreased from birth through diagnosis in patients with representative cancers except for neuroblastoma, the value significantly increased in patients with neuroblastoma diagnosed before 1 year of age (P =.03), especially in those whose cancer was detected by mass screening at 6 months of age (P <.01). CONCLUSIONS: Rapid somatic growth from birth through diagnosis in patients with neuroblastoma diagnosed before 1 year of age suggests a possible involvement of certain growth factors in these patients.     

Polyvinylpyrrolidone macromolecules function as a diffusion barrier during dealloying

The inhibition effect of polyvinylprrolidone (PVP) during dealloying on the formation of nanoporous Cu from a Ti₆₀Cu₄₀ amorphous alloy in hydrofluoric acids (HF) was investigated. A bicontinuous nanoporous Cu structure formed on Ti₆₀Cu₄₀ after dealloying. The pore size of nanoporous Cu formed in HF solution was 71 nm, but this decreased to 12 nm and 11 nm after dealloying for the same period of dealloying time of 43.2 ks when 0.01 M and 0.03 M PVP, respectively, was added into the 0.03 M HF base solution. The surface diffusivity was estimated to decrease from 2.5 × 10⁻¹⁸ m² s⁻¹ in 0.03 M HF solution to 1.84 × 10⁻²¹ m² s⁻¹ when 0.01 M PVP was added, and to 1.42 × 10⁻²¹ m² s⁻¹ when 0.03 M PVP was added. More PVP macromolecules were adsorbed onto the nanoporous Cu surface in the 0.03 M HF solution with the addition of 0.03 M PVP than when 0.01 M PVP was added to the solution, which resulted in the formation of smaller nanopores. The suppressed diffusion of Cu adatoms due to the PVP macromolecule resulted in the formation of finer Cu ligaments than that formed in 0.03 M HF solution. This long chain organic molecule was shown to act as a diffusion barrier for the diffusion of metal adatoms during dealloying and to elaborate the nanoporous structure.     

Sequential slippage tests using Robbins-Lai's invariant confidence sequences

The paper deals with two kinds of location-slippage testing problems.The alternative hypothesis says that there is a single slippage in one kind of problems,and that there are multiple slippages in the other kind. In a location slippage model, by using Robbins' inequality, Robbins-Lai's invariant confidence sequences for slippage are constructed for both of the problems and sequential slippage tests using those confidence sequences are proposed.     

Lossless broad-band monolithic microwave active inductors

Lossless broadband microwave active inductors for general-purpose use in microwave circuits are proposed, and their characteristics are discussed. These active inductors are composed of a common-source cascode FET and a feedback FET, and operate in a wide frequency range with very low series resistance. Their low-loss characteristics are demonstrated by simulation and experimental results. A maximum Q factor of 65 is obtained. Theoretically, it can reach infinity. The inductance value can be controlled by an external voltage control     

Molecular basis of the altered gag p19 protein (MA) of the transformation-defective mutant of Rous sarcoma virus, tdPH2010

The transformation-defective mutant of Rous sarcoma virus (RSV), tdPH2010, has a gag p19 (matrix; MA) protein which migrates on SDS-polyacrylamide gels faster than that of the parental (tsNY68) as well as other wild-type strains of RSV. To study the molecular basis of this altered migration pattern and its biological significance, the nucleotide sequence of the p19 region of tdPH2010 was determined. Comparison of the nucleotide sequence of tdPH2010 with that of the Schmidt-Ruppin A strain of RSV revealed a point mutation at nucleotide 755 (G to A), resulting in an amino-acid substitution at residue 126 of p19 (Glu to Lys). Acidic-methanol esterification of free carboxyl groups suppressed the difference in electrophoretic mobility of p19 between tdPH2010 and the wild-type virus. Recombinant virus constructs having the mutated gag region of tdPH2010 produced a p19 with the same electrophoretic mobility as the p19 of tdPH2010. We concluded that the point mutation caused the altered electrophoretic behavior of p19 of tdPH2010. The mutation had no effect on the growth of infected cells.     

Overview of multicarrier CDMA

The authors present an overview of new multiple access schemes based on a combination of code division and multicarrier techniques, such as multicarrier code-division multiple access (MC-CDMA), multicarrier direct sequence CDMA (multicarrier DS-CDMA), and multitone CDMA (MT-CDMA)     

Chemical vapour deposition of Si3N4 from a gas mixture of Si2Cl6, NH3 and H2

Si₃N₄ layers were obtained on a quartz substrate from a gas mixture of Si₂Cl₆, NH₃ and H₂ under a reduced pressure in a temperature range of 800 to 1300‡ C. Amorphous Si₃N₄ layers that were dense and adherent to the substrate were obtained in a temperature range of 800 to 1100‡ C. On the other hand,α-Si₃N₄ layers were obtained at 1200‡ C and a source-gas ratio (N/Si) of 1.33 to 1.77. The lowest deposition temperature of amorphous Si₃N₄ was considered to be about 700‡ C. The microhardness of amorphous Si₃N₄ obtained in a temperature range of 800 to 1100‡ C was 2400 to 2600 kg mm⁻² (load: 50 g), and that ofα-Si₃N₄ obtained at 1200‡ C was 3400 kg mm⁻². Chlorine contents in the Si₃N₄ layer decreased with increasing deposition temperature and source-gas ratio (N/Si), and with decreasing total pressure.