Interstitial pneumonia treated with intermittent cyclophosphamide pulse therapy

A 52-year-old woman was admitted to the hospital because of polyarthralgia and dry coughing. A chest X-ray film showed bilateral diffuse reticulo-nodular shadows. A specimen obtained by transbronchial lung biopsy revealed alveolar septal thickening and infiltration by mononuclear cells. Interstitial pneumonia associated with rheumatoid arthritis was diagnosed. Interstitial pneumonia relapsed soon after the first pulse of corticosteroid therapy. Cyclophosphamide pulse therapy was given in addition to a second pulse of corticosteroid therapy; 700 mg of cyclophosphamide (500 mg/m2) was administered intravenously every month and the dose of steroids was gradually reduced. Cyclophosphamide pulse therapy was repeated three times and the dose of oral corticosteroids was reduced from 60 mg to 35 mg. There was no bone marrow suppression or hemorrhagic cystitis after the cyclophosphamide pulses. Eventually, corticosteroid therapy was stopped with no clinical deterioration. This case suggests that intermittent cyclophosphamide pulse therapy can be effective for treatment of interstitial pneumonia unresponsive to corticosteroids.     

Supermicroporous Niobium Oxide as an Acid Catalyst

Supermicroporous (1.5–2.5 nm pore diameter) niobium oxide is synthesized using a nonionic block copolymer as a structural directing reagent, which is removed by water washing after aging. The oxide contains water in the bulk material in the form of a water-rich niobium oxide. The supermicroporous niobium oxide is applicable for various acid-catalyzed reactions.     

Novel Conjugated Organic Dyes for Efficient Dye‐Sensitized Solar Cells

Novel conjugated organic dyes that have N,N‐dimethylaniline (DMA) moieties as the electron donor and a cyanoacetic acid (CAA) moiety as the electron acceptor were developed for use in dye‐sensitized nanocrystalline‐TiO₂ solar cells (DSSCs). We attained a maximum solar‐energy‐to‐electricity conversion efficiency (η) of 6.8 % under AM 1.5 irradiation (100 mW cm^–2) with a DSSC based on 2‐cyano‐7,7‐bis(4‐dimethylamino‐phenyl)hepta‐2,4,6‐trienoic acid (NKX‐2569): short‐circuit photocurrent density (J_sc) = 12.9 mA cm^–2, open‐circuit voltage (V_oc) = 0.71 V, and fill factor (ff) = 0.74. The high performance of the solar cells indicated that highly efficient electron injection from the excited dyes to the conduction band of TiO₂ occurred. The experimental and calculated Fourier‐transform infrared (FT‐IR) absorption spectra clearly showed that these dyes were adsorbed on the TiO₂ surface with the carboxylate coordination form. A molecular‐orbital calculation indicated that the electron distribution moved from the DMA moiety to the CAA moiety by photoexcitation of the dye.     

A novel FSK demodulation method using short-time DFT analysis forLEO satellite communication systems

This paper proposes a novel frequency-shift keying (FSK) demodulation method using short-time discrete Fourier transform (ST-DFT) analysis for low-Earth-orbit (LEO) satellite communication systems. The ST-DFT-based FSK demodulation method is simple and robust to a large and time-variant frequency offset because it expands the received signal in a time-frequency plane and demodulates it only by searching the instantaneous spectral peaks with no complicated carrier-recovery circuit. Two kinds of demodulation strategies are proposed: a bit-by-bit demodulation algorithm and an efficient demodulation-algorithm frequency-sequence estimation (FSE) based on the Viterbi algorithm. In addition, in order to carry out an accurate ST-DFT window synchronization, a simple DFT-based ST-DFT window-synchronization method is proposed     

Size dependence of crystallization within spherical microdomain structures

We have investigated the size dependence of crystallization within spherical microdomains formed in various poly(ε-caprolactone)-block-polybutadiene diblock copolymers (PCL-b-PB). The crystallinity (χ) and melting temperature (T_m) of the PCL block are considerably lower than those of PCL homopolymer, and χ decreases steadily and T_m decreases only slightly with decreasing radius of PCL spheres (R) for a series of PCL-b-PB with a same molecular weight (M_n). When PCL-b-PB is compared with the similar R but different M_n, χ is significantly different, suggesting that the sphere size is not the unique factor to control crystallization within spherical microdomains.     

High-power, tunable, high-repetition rate TEA-13C18O2 laser

The authors report the power enhancement of a high-repetition-rate TEA-¹³C¹⁸O₂ laser by substitution of rare ¹⁵N₂ isotope instead of ¹⁴N₂ and its tunable single-mode operation. Efficient, high-power operation with a maximum average power of 25 W (100 Hz) at a slope efficiency of 5.6%, which is improved by a factor of 2 by substitution of ¹⁵N₂ instead of ¹⁴N₂, has been successfully achieved from a discharge volume of 57.5 cm³ with an active length of 26 cm. In addition, high-power, tunable, single-mode operation has been achieved with a three-mirror cavity consisting of two mirrors and a Littrow grating     

Improvement in Oxidation Resistance of Stainless Steel by Molten-Salt Electrodeposition of La

Improvement in the oxidation resistance of SUS304 stainless steel was accomplished by electrodeposition of La in a molten salt. The electrolysis of La was conducted using a potentiostatic-polarization method in an equimolar NaCl–KCl melt containing 3.5 mol. LaF ₃ at 1023 K. Observation of the specimen surface after polarization at –1.8 V (vs. Ag/Ag⁺ (0.1)) for 0.18 ks showed that La particles were uniformly dispersed on the surface. The oxidation resistance of the electrodeposited stainless steel was significantly improved as compared with the untreated stainless steel. The scale formed on the untreated stainless steel after oxidation was thick and consisted of Fe₂O₃ and Fe₃O₄, whereas the scale formed on the elecrodeposited stainless steel was extremely thin, and mainly consisted of Cr₂O₃.