Grain Boundary Segregation Behavior of Boron in Low-Alloy Steel

The boron concentration profiles around prior austenite grain boundaries in Fe-0.05C-0.5Mo-0.001B (mass pct) are examined using aberration-corrected STEM-EELS. In order to obtain the precise distribution of boron around the boundaries, tilt series measurements with thin specimens (<30 nm) are performed and the EEL spectra are analyzed by principal component analysis (PCA) and multivariate curve resolution (MCR). The boron concentration profile changes with the cooling rate from the solid solution temperature. The concentration at grain boundaries is maximized at a medium rate (30 °C/s), where the concentration reaches 8 at. pct, and it decreases at a larger (250 °C/s) or smaller (5 °C/s) rate. On the other hand, the boron distribution becomes wider as the cooling rate becomes smaller. The current results suggest that the boron segregation in the alloy is formed by the “non-equilibrium segregation mechanism.”     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

Operation Assist by Vibration Suppression Control Using Impulse‐Shaped Signals for Power Assist Conveyance System

This paper presents an assist control method for a flexible parts conveyance task using a power assist conveyance system. The assist control method should be designed so as not only to suppress vibration but also to reduce the degradation of operating feel. For this purpose, multiple impulse‐shaped signals are used as feedforward signals in order to reduce the vibration of flexible parts during conveyance. In addition, the adjustment time is introduced to adjust the input timing of the impulse‐shaped signal and to suppress vibration. In order to improve the degradation of operating feel, the smaller amplitudes of the three impulse‐shaped signals are used and input repeatedly. The effectiveness of the proposed system was verified experimentally. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(2): 31–39, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22476     

Improvement in thermal endurance of D-mannitol as phase-change material by impregnation into nanosized pores

This paper describes the control of the melting point and improvement of the thermal endurance of D-mannitol (melting point T_m = 440 K) as a phase-change material (PCM) by vacuum impregnation of the PCM into nanosized pores of porous SiO₂ grains. First, we examined the effects of the average pore size (D_P) of porous SiO₂ on T_m and latent heat (L) of PCM/SiO₂ composites. Second, we investigated the thermal endurance of the composites using constant temperature kinetics based on L of the PCM and composites. Third, we performed cyclic tests of melting and freezing on the composite to evaluate leakage of the PCM. Thermophysical properties of the samples were measured by differential scanning calorimetry, and the following results were obtained: (1) The impregnation ratio of the composites was 0.91–0.99; therefore, almost all pores were completely filled with the PCM. (2) T_m shifted to lower temperature with smaller D_P, reaching 413 K in case of the PCM/SiO₂ composite with a D_P of 11.6 nm (3) T_m was derived as a function of D_P from the Gibbs–Thomson equation taking into account the existence of a nonfreezing layer on the surface of the pore wall. (4) The duration of thermal degradation of the PCM/SiO₂ composite with D_P = 11.6 nm was three times longer than that of the pure PCM at a temperature that is 10 K more than each melting point. (5) The PCM/SiO₂ composite with D_P = 11.6 nm can use as a shape-stable PCM composite without leakage of PCM.     

Preparation of ultrafine polyurethane fiber web by laser‐electrospinning combined with air blowing

Thermoplastic polyurethane fiber webs were prepared using a laser‐heated electrospinning process combined with air blowing. The effect of spinning conditions such as air flow rate and air temperature on fiber diameter and molecular weight was investigated. Although the average fiber diameter decreased with increased air flow rate at each air temperature, the diameter increased when the air flow rate was >15 NL min^?1. In addition, the fiber was comparatively thicker with an increase in the air temperature. The variation in the fiber diameter tends to increase with the air flow rate, and a reduction in the molecular weight of the fiber by thermal degradation was suppressed. The thinnest and most uniform fiber with a diameter of 0.9 µm and a diameter coefficient variation of 15% was obtained at an air temperature of 25°C under an air flow rate of 15 NL min^?1. This fiber also had a minimum of decreased molecular weight. POLYM. ENG. SCI., 54:2605–2609, 2014. © 2013 Society of Plastics Engineers     

Immunomodulatory effect of mushrooms on cytotoxic activity and cytokine production of intestinal lamina propria leukocytes does not necessarily depend on β-glucan contents

We evaluated the effects of seven mushroom extracts (Grifola frondosa, Pholiota nameko, Panellus serotinus, Hypsizygus marmoreus, Pleurotus cornucopiae, Armillaria mellea, and Flammulina velutipes) on cytotoxic activity and cytokine production of lamina propria leukocytes (LPLs) isolated from rat small (S) and large (L) intestinal mucosa. Boiling water extracts from seven species of mushrooms showed no direct cytotoxicity against the YAC-1 target cells. However, prominent increases of cytotoxicity were observed in S- and L-LPLs co-cultured with P. serotinus extract. Cytokine production (TNFα, IFNγ, IL-12 p70, and IL-4) of S- and L-LPLs was stimulated in response to P. cornucopiae extract. Mushroom extracts contributed to target cell adhesion and/or cytokine production in the effector cells. The promotion of cytotoxic activity in S- and L-LPLs was not necessarily related to β-glucan content of the mushroom.     

Circulating Organ-Specific MicroRNAs Serve as Biomarkers in Organ-Specific Diseases: Implications for Organ Allo- and Xeno-Transplantation

Different cell types possess different miRNA expression profiles, and cell/tissue/organ-specific miRNAs (or profiles) indicate different diseases. Circulating miRNA is either actively secreted by living cells or passively released during cell death. Circulating cell/tissue/organ-specific miRNA may serve as a non-invasive biomarker for allo- or xeno-transplantation to monitor organ survival and immune rejection. In this review, we summarize the proof of concept that circulating organ-specific miRNAs serve as non-invasive biomarkers for a wide spectrum of clinical organ-specific manifestations such as liver-related disease, heart-related disease, kidney-related disease, and lung-related disease. Furthermore, we summarize how circulating organ-specific miRNAs may have advantages over conventional methods for monitoring immune rejection in organ transplantation. Finally, we discuss the implications and challenges of applying miRNA to monitor organ survival and immune rejection in allo- or xeno-transplantation.     

Small-angle X-ray scattering studies on melting and recrystallization behaviors of poly(oxyethylene) crystallites in poly(d,l-lactide)/poly(oxyethylene) blends

Direct determination of the discrete distribution for crystalline lamellar thickness has been performed for poly(d,l-lactic acid)/poly(oxyethylene) (PDLLA/PEG) blends by conducting small-angle X-ray scattering (SAXS) measurements using synchrotron radiation. The PDLLA used was an random (racemic) copolymer of bio-based poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) with the lactide monomer ratio of l:d = 50:50. It is known that PLA is miscible with PEG in the amorphous state. In the current paper, we report comprehensive results on structural analyses of PDLLA/PEG blends in the course of heating and cooling process using SAXS to elucidate the change in the thickness distribution of the lamellae. As a consequence, it was found that the distribution of the lamellar thickness moves toward the larger value (in other words, lamellar thickening) as temperature approaches the melting point. Typically, the thickness distribution was dispersed in the range of 10–20 nm at room temperature and it changed toward 40 nm in the vicinity of the melting temperature. To the best of our knowledge, this is the first report of direct determination of the discrete distribution for the crystalline lamellar thickness and their in-situ changes in the course of the lamellar thickening process. As a result, the lamellar thickening was found to occur at much lower temperature for the blend samples with 10% and 20% of PDLLA contents as compared to the PEG 100% sample. This phenomenon can be ascribed to the melting point depression owing to the miscibility between PEG and PDLLA. Thereby, thinner lamellae were melted and thicker ones appeared at much lower temperature for the blends than for the PEG 100% sample. As for the average repeating distance (long period) of the lamellar stacks, an abrupt increase similar to the critical divergence was observed (from 25 nm to 50 nm) in the heating process. Not only for the melting behavior but also in the course of recrystallization, change in the lamellar-thickness distribution was uncovered, which shows strong hysteresis depending on what temperature the sample was cooled down from.