Hollow micro-mesoporous carbon polyhedra produced by selective removal of skeletal scaffolds

An approach has been demonstrated for fabricating hollow micro-mesoporous carbon polyhedra by selective removal of the skeletal scaffolds of polyurethane (PU) foam in monolithic mesostructured resin/PU composites. Hollow micro-mesoporous carbon polyhedra with an irregular shape molded from the cellular cavities of PU foam were synthesized by using phenolic resol as a precursor, triblock copolymer Pluronic F127 as a template, PU foam as a skeletal scaffold and triethyl phosphate as a reaction agent. By a reaction with triethyl phosphate, the PU foam in resin/PU composites can be degraded, simultaneously leading to the disassembly of the monolithic structure into separated polyhedral particles. The method can also be used for synthesizing hollow micro-mesoporous carbon–silica polyhedra, using tetraethyl orthosilicate as a silica source. Moreover, after etching the silica away, hollow micro-mesoporous carbon polyhedra with an ordered hexagonal mesostructure (space group p6mm), large particle sizes of 65–500 μm, a large surface area of 1384 m² g^?1, a uniform pore size of 3.2 nm and a high pore volume of 1.15 cm³ g^?1 as well as a high mesoporosity of 81% can be obtained, which exhibits excellent adsorption performance toward methylene blue compared with the active carbon having a similar surface area.     

Correct Prediction of the Vibration Behavior of a High Power Ultrasonic Transducer by FEM Simulation

This paper presents a study on three types of finite element analyses of high power ultrasonic transducer by using the finite element commercial software called ANSYS. The transducer geometry was treated as a 2D axi- symmetric model, 3D quart and full 3D model. For all of the simulations the modeled transducer was used in modal analysis and harmonic solutions to understand its mechanical behavior and its natural frequency. A comparison was made between each type of modeling and experimental results. This comparison allows the parameters of FEM models to be iteratively adjusted and optimized and also leads to selection of the best modeling type. The achieved FEM results exhibited a remarkably high predictive potential of ANSYS in modeling and simulation and allowed control on the design and on the vibration behavior of the high power ultrasonic transducer.     

Differential Metabotypes in Synovial Fibroblasts and Synovial Fluid in Hip Osteoarthritis Patients Support Inflammatory Responses

Changes in cellular metabolism have been implicated in mediating the activated fibroblast phenotype in a number of chronic inflammatory disorders, including pulmonary fibrosis, renal disease and rheumatoid arthritis. The aim of this study was therefore to characterise the metabolic profile of synovial joint fluid and synovial fibroblasts under both basal and inflammatory conditions in a cohort of obese and normal-weight hip OA patients. Furthermore, we sought to ascertain whether modulation of a metabolic pathway in OA synovial fibroblasts could alter their inflammatory activity. Synovium and synovial fluid was obtained from hip OA patients, who were either of normal-weight or obese and were undergoing elective joint replacement surgery. The synovial fluid metabolome was determined by 1H NMR spectroscopy. The metabolic profile of isolated synovial fibroblasts in vitro was characterised by lactate secretion, oxygen consumption rate (OCR) and extracellular acidification rate (ECAR) using the Seahorse XF Analyser. The effects of a small molecule pharmacological inhibitor and siRNA targeted at glutaminase-1 (GLS1) were assessed to probe the role of glutamine metabolism in OA synovial fibroblast function. Obese OA patient synovial fluid (n = 5) exhibited a different metabotype, compared to normal-weight patient fluid (n = 6), with significantly increased levels of 1, 3-dimethylurate, N-Nitrosodimethylamine, succinate, tyrosine, pyruvate, glucose, glycine and lactate, and enrichment of the glutamine–glutamate metabolic pathway, which correlated with increasing adiposity. In vitro, isolated obese OA fibroblasts exhibited greater basal lactate secretion and aerobic glycolysis, and increased mitochondrial respiration when stimulated with pro-inflammatory cytokine TNFα, compared to fibroblasts from normal-weight patients. Inhibition of GLS1 attenuated the TNFα-induced expression and secretion of IL-6 in OA synovial fibroblasts. These findings suggest that altered cellular metabolism underpins the inflammatory phenotype of OA fibroblasts, and that targeted inhibition of glutamine–glutamate metabolism may provide a route to reducing the pathological effects of joint inflammation in OA patients who are obese.     

Chemical Profile and Biological Activities of Two Edible Plants: Chemical Investigation and Quantitative Analysis Using Liquid Chromatography Tandem Mass Spectrometry and Gas Chromatography Mass Spectrometry

The objectives of this study were to define the phenolic and fatty acid profiles, anticholinesterase, antioxidant, antimicrobial activities, and total phenolic-flavonoid contents of Lycopsis orientalis and Tragopogon latifolius var. angustifolius which have been used as food source and food supplement in Anatolia and have never been examined before. Rosmarinic and quinic acids (21.11 and 11.46 mg g^–1 extract, respectively) were found to be the most abundant constituents in L. orientalis and T. latifolius var. angustifolius among the studied 27 compounds by liquid chromatography tandem mass spectrometry. In the fatty acid compositions of L. orientalis and T. latifolius var. angustifolius that were determined by gas chromatography mass spectrometry, oleic (29.1%) and palmitic (28.7%) acids were identified as the major components, respectively. The high antioxidant activity of the methanol extract of L. orientalis shows parallelism to its rosmarinic acid content. Besides, this extract showed medium anticholinesterase activity. The results of the present study proves that the L. orientalis might also be used as a food source due to its high phenolic acid content and strong antioxidant property.     

Constrained model predictive control of proton exchange membrane fuel cell

A constrained model predictive control (MPC) is designed to regulate the air flow rate of proton exchange membrane fuel cell (PEMFC). Oxygen excess ratio, compressor flow rate and supply manifold pressure are constrained to avoid oxygen starvation, surge and choke phenomena. This is achieved by manipulating compressor voltage and stack current. The choice of the manipulated input to satisfy a constraint is investigated. Surge and choke avoidance is successful, when compressor voltage is manipulated. When stack current is utilized to satisfy surge and choke constraints, a large unrealistic current is needed. Oxygen starvation is successfully avoided utilizing stack current, while compressor voltage manipulation fails to prevent oxygen starvation. Thus, a current governor is implemented to handle oxygen starvation, while the compressor voltage is constrained to avoid surge and choke. Quadratic programming optimization, Laguerre and exponential weight function are employed to reduce the computational burden of the controller. The simulation results prove that the proposed controller managed to satisfy all constraints without any conflict.     

Observation of non-chemical equilibrium effect on Ar-CO2-H2 thermal plasma model by changing pressure

The authors developed a two-dimensional one-temperature chemical non-equilibrium (1T-NCE) model of Ar-CO₂-H₂ inductively coupled thermal plasmas (ICTP) to investigate the effect of pressure variation. The basic concept of one-temperature model is the assumption and treatment of the same energy conservation equation for electrons and heavy particles. The energy conservation equations consider reaction heat effects and energy transfer among the species produced as well as enthalpy flow resulting from diffusion. Assuming twenty two (22) different particles in this model and by solving mass conservation equations for each particle, considering diffusion, convection and net production terms resulting from hundred and ninety eight (198) chemical reactions, chemical non-equilibrium effects were taken into account. Transport and thermodynamic properties of Ar-CO₂-H₂ thermal plasmas were self-consistently calculated using the first-order approximation of the Chapman-Enskog method. Finally results obtained at atmospheric pressure (760 Torr) and at reduced pressure (500, 300 Torr) were compared with results from one-temperature chemical equilibrium (1T-CE) model. And of course, this comparison supported discussion of chemical non-equilibrium effects in the inductively coupled thermal plasmas (ICTP).     

Indium oxysulfide nanosheet photocatalyst for the hexavalent chromium detoxification and hydrogen evolution reaction

Indium oxysulfide nanosheet (In₂(O,S)₃ NS) had been successfully synthesized by a solution-based process at 90 °C. To further study some properties of photocatalyst, the 90 °C-prepared In₂(O,S)₃ NS was annealed at 350, 400, and 450 °C in air for 2 h. It was found that the nanosheet structure at 90 °C changed to nanoparticle at higher temperature. All the as-prepared and annealed photocatalysts were carefully characterized and examined toward photocatalytic hexavalent chromium (Cr(VI)) reduction. Among the photocatalysts, 90 °C-prepared In₂(O,S)₃ NS exhibited the greatest photocatalytic reduction of Cr(VI) without using any hole scavenger reagent under 150 W visible light illumination. After the Ag deposition on In₂(O,S)₃ NS, the photocatalyst could produce nearly 400 μmol/g hydrogen gas in ethanol solution under 150 W Xe-lamp irradiation for 5 h. The great performance of 90 °C-prepared In₂(O,S)₃ NS was due to the high surface area of nanosheet morphology and the formation of solid solution which significantly increased the visible light absorbance. The photocatalytic activities and their mechanisms of 90 °C-prepared In₂(O,S)₃ NS were evaluated and elaborated in this work.     

Economic evaluation of floating gardening as a means of adapting to climate change in Bangladesh

This paper offers an economic evaluation of the floating garden as a means of adapting to climate change in Bangladesh. The study showed that the monthly income of some farmers using such gardens increased from US$12.02 to US$48.08. These folk farmers lacked alternative work especially during the monsoon period. The floating garden uses available natural resources, adjusts to wet conditions and helps the flood-prone people to earn a living, and can be an adaptive response to frequent disaster events in Bangladesh.     

Bacterial quality of raw milk investigated by Escherichia coli and isolates analysis for specific virulence-gene markers

The bacterial quality and safety of raw milk sources in Taif region (Western Saudi Arabia) were analyzed for the natural contamination of fecal coliform and Escherichia coli by standard most probable number method. The E. coli isolates were identified to species identity using API 20E and screened for markers of STEC (Stx1, Stx2), ETEC (ST, LT), (EaeA) and ExPEC (CNF1, CNF2, SfaS, PapA, CdtB, IutA, FyuA, TraT) using PCR assays. Thirty-three E. coli strains were recovered from raw milk sample sources, which were contaminated by fecal coliform. None of the investigated isolates reacted positively with the PapA, SfaS and CdtB, ST and LT-specific primers. Markers of STEC and EPEC were each detected in three strains. NTEC was detected in four strains. The most frequent virulence markers were TraT (17 strains), IutA (11 strains) and FyuA (8 strains). Results suggested a possibility of potential public health threat of E. coli originating from raw milk sources.