Seasonal variations of chemical composition in prickly pear (Opuntia ficus-indica (L.) miller)

The moisture, ash, free reducing sugar, starch, ether extractive, crude protein, amino acid and the heat energy contents of young and mature cladodes of Opuntia ficus-indica, with or without fruits, are described. The measurements were made in each of the following stages of development: vegetative growth (March), full vegetative development, and at the beginning of fructification (October). Independently of developmental stage (different cladode types) the highest values were reached always in young cladodes in the following months: moisture content in March and October; ash and free reducing sugars in March; starch and ether extractive in September and October; crude protein in March and July. Crude fibre was maximal in September and global heat energy in October. The nutritive and caloric value of cladodes are compared to other products used for livestock nutrition.     

Production of Nanoparticles in Thermal Plasmas: A Model Including Evaporation,Nucleation, Condensation,and Fractal Aggregation

In this work a coupled model for the production of nanoparticles in an inductively coupled plasma reactor is proposed. A Lagrangian approach is used to describe the evaporation of precursor particles and an Eulerian model accounting for particle nucleation, condensation, and fractal aggregation. The models of the precursor and nanoparticles are coupled with the magneto-hydrodynamic equations describing the plasma. The purpose of this study is to develop a model for the synthesis of particles in a thermal plasma reactor, which can be used to optimize industrial reactors. The growth of aggregates is considered by introducing a power law exponent D _f. Results are compared qualitatively and quantitatively with existing experimental data from plasma reactors at a relatively large laboratory scale. The results obtained from the model confirm the previously observed importance of the quench strategy in defining the morphology of the nanoparticles.     

Photocatalytic production of hydrogen from electrodeposited film and sacrificial electron donors

A new approach to combining a p-type semiconductor photocathode with sacrificial electron donors in the anode compartment in a two-compartment cell is described for photocatalytic hydrogen production. This approach is demonstrated for electrodeposited p-Cu₂O film supported on a transparent conducting oxide substrate. The oxide semiconductor surface was photochemically modified in situ with an ultra-thin Ni layer prior to use. A variety of organic and organometallic electron donors was screened by cyclic voltammetry, and the optimal candidate was hydroquinone at pH 10. Importantly, no photocurrents were measured at zero bias voltage in the two-compartment cell in the absence of an electron donor, signaling that water photosplitting is not feasible with p-Cu₂O. Methyl viologen (MV²⁺) was effective as an electron relay in the photocathode chamber as shown by in situ spectroscopic monitoring of the MV⁺ radical cations. Finally, practical perspectives of this new approach and value-added options for combining it with pollutant destruction are described.     

Electrochemically Stimulated Release from Liposomes Embedded in a Polyelectrolyte Multilayer

Triggered release of an entrapped dye from vesicles embedded in a polyelectrolyte multilayer (PEM), as a consequence of the electrochemically induced local pH change in the vicinity of the electrode, is reported. The PEM was deposited on an indium tin oxide (ITO) electrode wherein lipid vesicles filled with a fluorescent dye were embedded. The use of vesicles with a strong negative charge and the polyelectrolyte species of the PEM matrix with a polycation as topmost layer enabled the generation of a stable layer of liposomes in the PEM.     

Clinical Significance of Molecular Subtypes in Western Advanced Gastric Cancer: A Real-World Multicenter Experience

In recent years, the molecular subtyping of gastric cancer has led to the identification of novel clinically relevant biomarkers as well as promising therapeutic targets. In parallel, the advent of checkpoint inhibitors has expanded treatment options beyond conventional chemotherapy. Compelling evidence has shown unprecedented efficacy results for anti-PD1-based therapies in the molecular subgroups of dMMR/MSI-h, EBV+ and PD-L1 CPS+ patients, to the point that these are granted approval for gastric cancer adenocarcinoma (AGC) in several countries. Despite this, cytotoxic chemotherapy remains the only treatment choice for the considerable proportion of biomarkers-negative patients. In this context, little is known about the association between subtypes-defining biomarkers (HER2, MMR/MSI, PD-L1, and EBV) and the efficacy of standard chemotherapy in non-Asian AGC. Here, we aimed to investigate the prevalence, the clinic-pathologic features, and the impact on treatment outcome of clinical molecular subtypes in a new-diagnosed Western cohort of AGC.     

Applications of Euclidean constructions to computer graphics

This paper presents an interactive graphics system called L.E.G.O. The purpose of L.E.G.O. is to model two- and three-dimensional objects using Euclidean geometry constructions. L.E.G.O. has a layered structure which makes it convenient to use, both for the experienced programmer and the novice. The programs may be written in a compiled language (C), written interactively in an interpreted language (LISP) or developed using a graphical interface in a multiple-window environment. Applications of L.E.G.O. include computer-assisted instruction of geometry and computer graphics, geometric modeling, and kinematic analysis. The use of imperative constructions and the powerful interface based on the idea of graphical programming are the most distinctive features of the system.     

Effect of coupling agents on the thermal and mechanical properties of polypropylene–jute fabric composites

Composites with different jute fabric contents and polypropylene (PP) were prepared by compression molding. The composite tensile modulus increased as the fiber content increased, although the strain at break decreased due to the restriction imposed on the deformation of the matrix by the rigid fibers. Moreover, and despite the chemical incompatibility between the polar fiber and the PP matrix, the tensile strength increased with jute content because of the use of long woven fibers. The interfacial adhesion between jute and PP was improved by the addition of different commercial maleated polypropylenes to the neat PP matrix. The effect of these coupling agents on the interface properties was inferred from the resulting composite mechanical properties. Out‐of‐plane instrumented falling weight impact tests showed that compatibilized composites had lower propagation energy than uncompatibilized ones, which was a clear indication that the adhesion between matrix and fibers was better in the former case since fewer mechanisms of energy propagation were activated. These results are in agreement with those found in tensile tests, inasmuch as the compatibilized composites exhibit the highest tensile strength. Scanning electron microscopy also revealed that the compatibilized composites exhibited less fiber pullout and smoother fiber surface than uncompatibilized ones. The thermal behavior of PP–compatibilizer blends was also analyzed using differential scanning calorimetry, to confirm that the improvements in the mechanical properties were the result of the improved adhesion between both faces and not due to changes in the crystallinity of the matrix. Copyright © 2006 Society of Chemical Industry     

Generation of hardened steel surfaces with adjustable roughness by means of a pulsed electron beam

In this work we are utilizing a Pulsed Cold Cathode Electron Beam (PCCEB) for steel surface treatment that presents distinct properties as compared to other beam sources for rapid heating of metal surfaces. The possibility of producing different surface transformations like, melting and solid-solid transformations by adjusting the gun control parameters is demonstrated. It is shown that for the same base material, different pulse conditions give rise to distinct structures, a roughened or smooth martensitic surface or a smooth pearlite layer several microns thick. For the liquid-solid transformation, it is shown for the first time that with an adequate impurity content the instability onset threshold (giving rise to a rough topography) is different from the melting threshold. Hence, by controlling the discharge parameters, it is possible to obtain different topographies with similar crystallographic structure and hardness, allowing an adjustment of the final roughness to the particular application requirements.     

Comparison of Cuban and Anglo-American cultural values in a clinical population.

Attempted to replicate an earlier study investigating cultural differences between Cuban immigrants and Anglo-Americans. Whereas the earlier study used a nonclinical adolescent population, the current study used 52 adults in outpatient treatment. Ss were given a biographical questionnaire and the Value Orientation scales. Results indicate that the groups differed in relational, temporal, and person–nature orientations, confirming previous findings and clinical observations. (3 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Behavior and enterotoxin production by coagulase negative Staphylococcus in cooked ham, reconstituted skimmed milk, and confectionery cream

Abstract: In this study, the behavior and enterotoxin production by 10 different coagulase negative Staphylococcus (CNS) strains inoculated in cooked ham, reconstituted skimmed milk, and confectionery cream in the presence or absence of background microbiota have been investigated. After inoculation (10³ CFU/g), foods were incubated at 25, 30, and 37 °C and aerobic mesophilic and CNS counts were carried out at 12, 24, 48, and 72 h. Staphylococcal enterotoxins (SE) detection was performed by SET-RPLA (Oxoid, Basingstoke, U.K.) and mini-Vidas® (bioMérieux, La Balme les Grottes, France). CNS counts increased during incubation and approached 10⁶ to 10⁷ CFU/g after 12 h at 37 °C in the 3 foods studied. At 25 °C, counts reached 10⁶ to 10⁷ CFU/g only after 24 to 48 h. The interference of background microbiota on CNS behavior was only observed when they grew in sliced cooked ham, which presented a high initial total count (10⁵ CFU/g). Significantly higher counts of CNS isolated from raw cow's milk in comparison with food handlers isolates were found in reconstituted milk and confectionery cream. Although CNS strains were able to produce SEA, SEB, and SED in culture media, in foods, in the presence or absence of background microbiota S. chromogenes LE0598 was the only strain able to produce SEs. Despite the scarcity of reports on CNS involvement with foodborne disease outbreaks, the results found here support the CNS growth and SE production in foods even in the presence of background microbiota and may affect food safety.