Friction properties of cork

The friction coefficient, , of cork sliding on another material (glass and steel in most experiments and also cork) was measured for various compressive stresses and sliding velocities. There is a strong effect of stress and a negligible effect of velocity on the friction coefficient. Values of are in the range 0.4 to 1.2. The effect of moisture content of cork was also evaluated. For dry cork (6% moisture content) there is anisotropy of the friction coefficient related to the orientation of the sliding plane of cork, with larger values for sliding in the tangential plane (compression in the radial direction) as compared to sliding in planes perpendicular to this. At larger moisture contents, the anisotropy of decreases. No in-plane of sliding anisotropy was detected. The friction coefficients for sliding on glass and on steel are comparable, but an effect of roughness was detected. The friction coefficients for sliding on glass and on steel are comparable, but an effect of roughness was detected. The friction against cork is large, with close to unity. The interplay between the friction coefficient and the compression properties of cork is discussed. © 1998 Chapman & Hall     

A meta-heuristic approach to solve a JIT scheduling problem in hybrid flow shop

In this paper we address a hybrid flow shop scheduling problem considering the minimization of the sum of the total earliness and tardiness penalties. This problem is proven to be NP-hard, and consequently the development of heuristic and meta-heuristic approaches to solve it is well justified. So, we propose an ant colony optimization method to deal with this problem. Our proposed method has several features, including some heuristics that specifically take into account both earliness and tardiness penalties to compute the heuristic information values. The performance of our algorithm is tested by numerical experiments on a large number of randomly generated problems. A comparison with solutions performance obtained by some constructive heuristics is presented. The results show that the proposed approach performs well for this problem.     

Sulphur dioxide loadings over megacity Lahore (Pakistan) and adjoining region of Indo-Gangetic Basin

This article presents spatial and temporal variations of planetary boundary layer (PBL) sulphur dioxide (SO₂) over megacity Lahore and adjoining region, a typical representative area in the Indo-Gangetic Basin (IGB) largely influenced by transported volcanic SO₂ from Africa, Middle East, and southern Europe, by using data retrieved from satellite-based Ozone Monitoring Instrument (OMI) during October 2004–September 2015. We find a positive trend of 2.4% per year (slope 0.01 ± 0.005 with y-intercept 0.35 ± 0.03 Dobson Unit (DU), correlation coefficient r = 0.55 and 2-tailed p-value at 0.1) of OMI-SO₂ column with the average value of 0.4 ± 0.05 DU. Strong seasonality of OMI-SO₂ column is observed over the region linked with local meteorology, patterns of anthropogenic emissions, crop residue burning, and vegetation cover. There exists a seasonal high value in winter 0.56 ± 0.24 DU with a peak in December 0.67 ± 0.26 DU. The seasonal lowest value is observed to be 0.29 ± 0.11 DU in wet summer with minimum value in July 0.25 ± 0.06 DU. High growth rates of OMI-SO₂ column over the study region have been observed in January, June, October, and December ranging from 5.7% to 11.6% per year. Satellite data show elevated OMI-SO₂ columns in 2007, 2008, 2011, and 2012 largely contributed by trans-boundary volcanic SO₂. A detailed analysis of volcanic SO₂ transported from Africa and Middle East (Jabal Al-Tair, Dalaffilla, and Nabro volcanoes) over the study area is presented. Air mass trajectories suggest the presence of long-range transported volcanic SO₂ at high altitude levels over Lahore and IGB region during the volcanic episodes. The SO₂ enhancements in PBL during winter season are generally due to significant vertical downdraft of high-altitude volcanic SO₂. For the first time, we present significant influence of volcanic SO₂ from southern Europe (Mt. Etna volcano) reaching over the study area. Daily mean OMI-SO₂ levels up to 21.4, 10.0, 5.6, and 2.4 DU have been noticed due to the eruptions from Dalaffilla, Mt. Etna, Nabro, and Jabal Al-Tair volcanoes, respectively.     

Performance evaluation of semantic registries: OWLJessKB and instanceStore

Service discovery is a critical task in distributed computing architectures for finding a particular service instance. Semantic annotations of services help to enrich the service discovery process. Semantic registries are an important component for the discovery of services and they allow for semantic interoperability through ontology-based query formulation and dynamic mapping of terminologies between system domains. This paper evaluates two semantic registries—OWLJessKB implementation and instanceStore—to determine the suitability of these with regards to the query response time and the overall scalability for use in mathematical services. Mathematical ontologies from the MONET project are used to undertake comparison. The results demonstrate that the performance of registries may be compared across two axes: (1) time to initialize (i.e. time to load an initial ontology into memory); (2) time to query (i.e. time to reason with an ontology loaded into memory).     

Three Dimensional Conceptualisation of Hydrogeological Environment to Underpin Groundwater Management in Irrigation Area

Australian irrigated agriculture utilises about 70?% of all water used in the country, 21?% of which is derived from groundwater. Sustainability for irrigated agriculture also depends on keeping the watertables at a safe level below the rootzone to avoid salinisation and reduction in crop yields. There is a vital need to understand groundwater and aquifer systems and their roles in the sustainability of irrigated agriculture in order to manage groundwater properly. This study builds on the previous hydrogeological and groundwater investigations of the Coleambally Irrigation Area (CIA) in New South Wales of Australia. It presents a new approach which systematically characterises regional hydrogeological environment using a three-dimensional (3-D) conceptual framework developed in ArcGIS. The 3-D hydrological conceptualisation of the CIA has integrated disparate sources of data into a coherent knowledge base for a better visualisation of hydrogeological characteristics and a comprehensive analysis of groundwater flow and aquifers. As an application example, the model was used to develop cross-sectional models of the area and to estimate regional-scale net recharge. The results have provided a basis for the numerical modelling and added values to procedures which underpin irrigation system management investment decisions through improving the understanding of hydrogeology underlying the area and creating an action-oriented dialogue among stakeholders.     

Analysis of temporal jitter in a copper vapor laser system

Temporal jitter in a magnetic pulse compression based copper vapor laser (CVL) system is analyzed by considering ripple present in the input dc power supply and ripple present in the magnetic core resetting power supply. It is shown that the jitter is a function of the ratio of operating voltage to the designed voltage, percentage ripple, and the total propagation delay of the magnetic pulse compression circuit. Experimental results from a CVL system operating at a repetition rate of 9 kHz are presented.     

Effect of powder treatment on the crystallization behaviour and phase evolution of Al2O3–High ZrO2 nanocomposites

Al₂O₃–ZrO₂ composites containing nominally equal volume fraction of Al₂O₃ and ZrO₂ have been synthesized through combined gel-precipitation technique. Subsequently the gels were subjected to three different post gel processing treatments like ultrasonication, ultrasonication followed by water washing and ultrasonication followed by alcohol washing. It was observed that while in unwashed samples crystallization took place at low temperature, crystallization was delayed in the washed gels. The phase transition of ZrO₂ in the calcined gels followed the sequence; amorphous → cubic ZrO₂ → tetragonal ZrO₂ → monoclinic ZrO₂. On the other hand, phase transition in alumina followed the sequence amorphous to γ-Al₂O₃, the transition taking place at 650 °C. No α-Al₂O₃ could be detected even after calcination at 950 °C. However, all the sintered samples had α-Al₂O₃. In spite of high linear shrinkage (19–21%) during sintering, the sintered sample had density of only above 70% for all the four varieties of the powders. However, in spite of the low sintered density of the pellets, 31% tetragonal zirconia could be retained after sintering at 1400 °C and it reduced to about 16% at 1600 °C.     

Quality Management in Pakistan's Bedwear Industry

Pakistan's bedwear industry contributes significantly to Pakistan's industry in general and to its textile industrial output and exports in particular. The exports of bedwear have increased steadily. However, its key basis of competitive advantage has been low cost. After greater liberalization from 2005 onwards and due to tariffication of quotas, the bedwear industry will not only have to scale higher tariff walls but will be more exposed to the threat of anti-dumping duties as it relies primarily on low prices to penetrate the export markets. To enhance its competitiveness, it will have to combine better quality with low costs and quick response. Research in quality management in Pakistan's bedwear industry was, therefore, undertaken. A postal self-completion questionnaire was mailed to 38 members of Pakistan Bedwear Manufacturers' and Exporters' Association (PBMEA). The response rate was almost 79%. It was found that this industrial segment was in various stages of development. This study demonstrates both the effectiveness and the limits of quality assurance in improving the levels of quality which remain a moving target in a dynamic liberalizing international trade environment that is more competitive since 2005. The bedwear industry, therefore, needs to graduate to advanced practices in quality management in order to remain competitive in rapidly changing times.