Sulfated zirconia grafted on a mesoporous silica aerogel: Influence of the preparation parameters on textural, structural and catalytic properties

Silica supported sulfated zirconia catalysts were synthesized via a new method by grafting sulfated zirconia on the surface of a silica aerogel previously prepared. The main parameters studied in this work were the S/Zr, Zr/Si molar ratios and the support nature. The synthesized solids were characterized using XRD, N₂ physisorption at 77 K, TG-DTA/SM, sulfur chemical analysis and adsorption–desorption of pyridine followed by infrared spectroscopy. These solids were tested in the n-hexane isomerization reaction. Two types of mesopores were observed on the silica aerogel. This mesoporosity was affected depending on the preparation parameters.

The increase of the Zr/Si molar ratio induces the decrease of the size of zirconia particles deposed on the support. In this case, appreciable amounts of sulfur are retained with the presence of a relatively strong Brönsted and Lewis acid sites on the catalyst surface. A high density of Brönsted sites seems to be interesting in the n-hexane isomerization reaction.     

Preparation and catalytic activity of nanostructured Pd catalysts supported on hydrogenotitanate nanotubes

Nanostructured palladium particles (nanorods, icosahedra, cubes) were synthesized in aqueous solution using a seeding-mediated approach with a structure-directing agent. These nanostructured Pd particles were then impregnated onto hydrogenotitanate nanotubes using two different impregnation procedures. The as-prepared catalysts were then tested in the selective hydrogenation of cinnamaldehyde at 323 K under 10 bars of H₂. The selectivity is influenced by the morphology of the Pd nanostructured particles with a higher selectivity into saturated alcohols when the proportion of (111) Pd sites increases.     

Evolution of ochratoxin A content during red and rose vinification

BACKGROUND: This work aims to investigate the effects of the common vinification steps on the fate of the ochratoxin A (OTA) during wine making. Two assays of red and rose microvinification, with artificially contaminated grapes, were performed. The content of this mycotoxin was also monitored throughout the process of red wine making from naturally contaminated grapes in a winery. RESULTS: The results from the different assays revealed that the maceration of pomace have a significant effect on the increase of OTA content in red wine (P < 0.05) whereas the alcoholic fermentation had a reducing effect. However, the spontaneous malolactic fermentation showed no significant effect on the OTA content in wine (P > 0.05). Storage of red wine in tanks followed by draining caused a significant decrease of OTA of about 55%. Clarification with a gelatin oenological fining agent contributed to the removal of up to 58% of OTA from red wine. CONCLUSION: Overall, a consistent decrease in OTA concentration was noticed throughout either red or rose vinification. This work has contributed to the understanding of the fate of OTA during different vinification processes, especially from naturally contaminated grapes. Copyright © 2008 Society of Chemical Industry     

Catalytic nitroxidation of para-xylene over chromium oxide based catalysts

The synthesis of para-tolunitrile (PTN) and terephthalonitrile (TPN) by reacting nitrogen monoxide with para-xylene was studied in presence of three chromium oxide catalysts. The Cr₂O₃—Al₂O₃ catalyst was prepared under the form of aerogel or xerogel and shows excellent selectivities in nitriles along with good stability. However, the unsupported Cr₂O₃ catalyst showed much less performance and, in particular, produced no TPN. The beneficial action of alumina was explained in terms of stabilization of the Cr⁵⁺ species. Kinetic results seemed to indicate a redox-type mechanism of the reaction. Moreover the PTN was shown to be an intermediate in TPN formation.     

A methanol – Tolerant carbon supported Pt–Sn cathode catalysts

Carbon supported Pt–Sn bimetallic electrocatalysts with a Pt:Sn 90:10 atomic ratio were prepared by impregnation method and then heat treated at 300 and 500 °C under Helium atmosphere. The purpose of this work is to investigate the effect of tin addition to platinum for methanol tolerant oxygen reduction reaction. In this sense, structure and morphological properties of supported bimetallic catalysts were correlated to the catalytic performance. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) characterizations confirm the formation of Pt–Sn bimetallic electrocatalysts with a Pt single-phase material alloy and revealed an increase in the average particle size after heat treatment. The electrocatalytic activities of these samples for the oxygen reduction reaction (ORR) were examined in acidic medium using both a rotating disk (RDE) and a rotating ring disk (RRDE) electrodes. Compared with the Pt/C, Pt–Sn/C bimetallic catalysts show superior electrocatalytic activity towards ORR with an approaching four electron pathway leading to water formation. The specific and mass activity for ORR follow the order of Pt–Sn/C-500 ≈ Pt–Sn/C-300 > Pt–Sn/C > Pt/C. Furthermore, it is found that among the three Pt–Sn samples, Pt–Sn/C-500 exhibits the highest methanol tolerance. These experimental observations indicate that the addition of Sn into Pt is favorable to maximize the ORR performances of platinum and further the heat treatment is beneficial to improve the methanol tolerance behavior. On this basis, the novel Pt–Sn catalysts can be considered as potential candidates to be used as cathodes in Direct Methanol Fuel Cells.     

HPLC determination of ochratoxin A in high consumption Tunisian foods

Samples (180) of high consumption food commodities from various regions of Tunisia were analysed to determine ochratoxin A contamination levels. A high performance liquid chromatography method for ochratoxin A determination was optimized. Samples were extracted with acetonitrile/water (80:20, v/v) solution and purified by immunoaffinity column. Average recoveries at 0.5 and 2 ng/g levels ranged from 84 ± 3.1 to 94 ± 1.2% with a between-day coefficient of variation (RSDR) of 3.8%. The method detection limit was 0.1 ng/g and ochratoxin identity was confirmed by methyl ester formation. The whole procedure was simple and fast if compared with other existing procedures. Performed analysis indicates that 45% of monitored samples were contaminated with levels ranging from 0.11 to 33.9 ng/g. The most contaminated commodities were barley, sorghum and wheat.     

3D Deformable Super-Resolution for Multi-Camera 3D Face Scanning

Low-cost and high-accuracy 3D face measurement is becoming increasingly important in many computer vision applications including face recognition, facial animation, games, orthodontics and aesthetic surgery. In most cases fringe projection based systems are used to overcome the relatively uniform appearance of skin. These systems employ a structured light camera/projector device and require explicit user cooperation and controlled lighting conditions. In this paper, we propose a 3D acquisition solution with a 3D space-time non-rigid super-resolution capability, using three calibrated cameras coupled with a non calibrated projector device, which is particularly suited to 3D face scanning, i.e. rapid, easily movable and robust to ambient lighting variation. The proposed solution is a hybrid stereovision and phase-shifting approach, using two shifted patterns and a texture image, which not only takes advantage of stereovision and structured light, but also overcomes their weaknesses. The super-resolution scheme involves a shape+texture 3D non-rigid registration for 3D artifacts correction in the presence of small non-rigid deformations as facial expressions.     

Robustness of adaptive control of robots

In this paper we discuss the robustness of adaptive control of rigid robots and methods for improving robustness in the face of unmodeled dynamics and external disturbances. Robustness to unmodeled dynamics is achieved using a so-called composite control strategy based on a singular perturbation formulation of the manipulator dynamics together with -modificiation. Rigorous stability proofs are given using a composite Lyapunov function approach.Research partially supported by the National Science Foundation under Grants INT-8902476 and MSM-9100618 and by the University of Illinois Manufacturing Research Center.