Further study on different dopings into PbWO4 single crystals to increase the scintillation light yield

Since we presented our preliminary result (Nucl. Instr. and Meth. A 486 (2002) 170) at SCINT2001, we have continued our efforts to increase the light yield (LY) of PbWO₄ scintillators by extending different dopings with an aim to find a possibility of using PbWO₄ successfully in Positron Emission Tomography (PET). Overall result obtained for single doping as well as double and tripple co-dopings are summarized, including decay characteristics and radiation hardness. The LY in non-doped PbWO₄ crystals with a size of 10×10×(20–30) mm³ is 25–35 photolectrons/MeV (phe/MeV) corresponding to 3–4% of the LY in BGO, when measured with a bialkali photomultiplier during a gate of 1 μs. The maximum LY increased to 49 phe/MeV for single doping with Mo⁶⁺, 80 phe/MeV for double co-doping of Mo⁶⁺+Sb⁵⁺, and 85 phe/MeV for tripple co-doping of Mo⁶⁺+Cd²⁺+Sb⁵⁺. The radiation hardness is larger than 10⁵ Gy for each of the samples co-doped with Mo⁶⁺+Sb⁵⁺ and Mo⁶⁺+Cd²⁺+Sb⁵⁺, while it is much poorer in PWO:Mo⁶⁺. In each of these co-doped samples, a medium-speed green emission in the microsecond range is created besides the fundamental fast (a few nanoseconds range) blue one, giving a peak at 500 nm in the radioluminescence spectrum similarly as in PWO:Mo⁶⁺.     

Two-group interfacial area transport in vertical air-water flow: I. Mechanistic model

The prediction of the dynamical evolution of interfacial area concentration is one of the most challenging tasks in two-fluid model application. This paper is focused on developing theoretical models for interfacial area source and sink terms for a two-group interfacial area transport equation. Mechanistic models of major fluid particle interaction phenomena involving two bubble groups are proposed, including the shearing-off of small bubbles from slug/cap bubbles, the wake entrainment of spherical/distorted bubble group into slug/cap bubble group, the wake acceleration and coalescence between slug/cap bubbles, and the breakup of slug/cap bubbles due to turbulent eddy impacts. The existing one-group interaction terms are extended in considering the generation of cap bubbles, as well as different parametric dependences when these terms are applied to the slug flow regime. The complete set of modeling equations is closed and continuously covers the bubbly flow, slug flow, and churn-turbulent flow regimes. Prediction of the interfacial area concentration evolution using a one-dimensional two-group transport equation and evaluation with experimental results are described in a companion paper.     

Noninvasive blood glucose assay using a newly developed near-infrared system

This paper reports in vivo near-infrared (NIR) noninvasive blood glucose assay using dermis tissue spectra. We assume that the glucose content in dermis tissue traces the variations in blood glucose. For dermis spectra measurements, epidermis, especially stratum corneum, acts as an interference in skin tissue. Thus, we have developed a method for the selective measurement of dermis tissue spectra, enabling us to obtain better quality spectra for an accurate blood glucose assay. The selective measurement of the dermis spectra realized by using a newly developed fiber-optic probe that consists of source and detector optical fibers separated by 0.65 mm on a skin surface. The light path in the skin tissue for this geometry has been simulated by a Monte Carlo method. The simulation results show that detected light mainly interrogates dermis tissue. As the absorbance signal of glucose in human tissue is extremely small, the quality of the measured spectra is critical for the reliable assay. The present method for blood glucose assay has been applied to one Type 1 diabetic. The correlation coefficient between the blood glucose content predicted by NIR spectra and those measured by finger-prick was 0.928 and the standard error of prediction was 32.2 mg/dL. These results demonstrate the potential of our methodology for noninvasive NIR blood glucose assay.     

Frequency range extension of actively mode-locked lasers integratedwith electroabsorption modulators using chirped gratings

We have fabricated actively mode-locked lasers integrated with electroabsorption modulators and chirped gratings. A chirped grating with a large chirp rate of 1.45 Å/μm can be realized by using multiphase-shifted patterns. Short pulses of 4-6 ps were generated over a wide frequency range from 18.9-19.8 GHz. We observed jumps in the wavelength during detuning. These jumps arise from multiple lobes in the reflectivity spectrum. It is found that the wavelength jumps cause increases in the intensity noise. We showed that by reducing the grating length from 150 to 100 μm the sidelobes were suppressed and the detuning frequency range of over 1% could be realized. A smaller pulsewidth was obtained for the negatively-chirped gratings when compared to the positively chirped gratings     

A Study of the Effect of Aluminium on the Mechanochemical Reduction of Hematite by Graphite

The effect of addition of small amounts of aluminium on mechano‐chemical reduction of hematite by graphite was studied. Various amounts of aluminium (0 to 10%) were added to a hematite‐graphite mixture, in which C/O ratio was 1:1. The hematite‐graphite‐aluminium mixtures were then subjected to ball milling followed by heating up reduction. The heating up reduction was carried out in Ar atmosphere, using TG‐DTA device. In TG‐DTA experiments, samples were heated by a constant heating rate of 10 °C/min from room temperature up to 1100 °C and maintained for 30 minutes at this temperature. To clarify the reactions which took place during milling and heating up reduction, the samples were subjected to XRD examinations. It was found that the heat generated during exothermic reaction of aluminothermic reduction of hematite promoted the endothermic reaction of carbothermic reduction. In the course of heating up reduction, the carbothermic reaction occurred just after aluminothermic reaction. Increasing of aluminum content from 0 to 10% in 2 hours ball milled samples decreased the temperature of carbothermic reaction from 1020 °C to about 860 °C. The further ball milling of the samples up to 5 and 10 hours, for the samples containing 10 and 5% aluminium respectively, caused the decrease of the temperature of aluminothermic and carbothermic reactions to around the melting point of aluminium.     

Modeling of bubble coalescence and disintegration in confined upward two-phase flow

This paper presents the modeling of bubble interaction mechanisms in the two-group interfacial area transport equation (IATE) for confined gas–liquid two-phase flow. The transport equation is applicable to bubbly, cap-turbulent, and churn-turbulent flow regimes. In the two-group IATE, bubbles are categorized into two groups: spherical/distorted bubbles as Group 1 and cap/slug/churn-turbulent bubbles as Group 2. Thus, two sets of equations are used to describe the generation and destruction rates of bubble number density, void fraction, and interfacial area concentration for the two groups of bubbles due to bubble expansion and compression, coalescence and disintegration, and phase change. Five major bubble interaction mechanisms are identified for the gas–liquid two-phase flow of interest, and are analytically modeled as the source/sink terms for the transport equation in the confined flow. These models include both intra-group and inter-group bubble interactions.     

Model evaluation of two-group interfacial area transport equation for confined upward flow

The bubble interaction mechanisms have been analytically modeled in the first paper of this series to provide mechanistic constitutive relations for the two-group interfacial area transport equation (IATE), which was proposed to dynamically solve the interfacial area concentration in the two-fluid model. This paper presents the evaluation approach and results of the two-group IATE based on available experimental data obtained in confined upward flow, namely, 11 data sets in or near bubbly flow and 13 sets in cap-turbulent and churn-turbulent flows. The two-group IATE is evaluated in steady-state, one-dimensional (1D) form. To account for the inter-group bubble transport, the void fraction transport equation for Group-2 bubbles is also used to predict the void fraction for Group-2 bubbles. Agreement between the data and the model predictions is reasonably good and the average relative difference for the total interfacial area concentration between the 24 data sets and predictions is within 7%. The model evaluation demonstrates the capability of the two-group IATE focused on the current confined flow to predict the interfacial area concentration over a wide range of flow regimes.     

Enhanced crystallization of poly(lactide) stereocomplex by xylan propionate

The effect of xylan propionate (XylPr) as a novel biomass‐derived nucleating agent on the poly(lactide) sterecomplex was investigated. Addition of XylPr to an enantiomeric blend of poly(l ‐lactide) (PLLA) and poly(d ‐lactide) (PDLA) was performed in either the solution state or molten state. The solution blend of PLLA/PDLA with XylPr was prepared by mixing equal volumes of 1 wt% XylPr/PLLA and 1 wt% XylPr/PDLA solutions in chloroform and precipitating in methanol. The solution blend with XylPr showed shorter half‐time crystallization than the solution blend without XylPr in isothermal crystallization between 80 and 140 °C, although homocrystallization occurred. Enhanced stereocomplex crystallization in the solution blend with XylPr was observed at 180 °C, where no crystallization occurred in the solution blend without XylPr. Addition of XylPr to PLLA/PDLA blend in the molten state was performed at 240 °C. Thereafter, the melt blend of PLLA/PDLA with or without XylPr was either quenched in iced water or isothermally crystallized directly from the melt. Isothermal crystallization of the melt‐quenched blend with XylPr gave a similar result to the solution blend with XylPr. In contrast, the melt‐crystallized blend with XylPr formed only stereocomplex crystals after crystallization above 140 °C. Furthermore, the melt‐crystallized blend with XylPr showed a higher crystallinity index and melting temperature than the melt‐crystallized blend without XylPr. This shows that XylPr promotes stereocomplex crystallization only when the blend of PLLA/PDLA with XylPr is directly crystallized from the molten state just after blending. © 2016 Society of Chemical Industry     

Enhanced catalytic activity of nanoshell carbon co-doped with boron and nitrogen in the oxygen reduction reaction

The use of carbon cathode catalysts in polymer electrolyte fuel cells instead of the current platinum catalysts is attracting increasing attention. We claim that two factors are important for enhancing the activity of carbon cathode catalysts in the oxygen reduction reaction (ORR): the formation of a nanoshell structure and co-doping with boron and nitrogen. Herein, we investigate the preparation and characterization of active ORR carbon catalysts that combine the above factors. Boron and nitrogen (BN)-doped nanoshell-containing carbon (BN-NSCC) was prepared by carbonizing a mixture of poly(furfuryl alcohol), cobalt phthalocyanine, melamine, and a trifluoroborane–methanol complex at 1000 °C. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed the formation of nanoshell structures with distorted graphitic layers and the introduction of boron and nitrogen atoms, respectively. The ORR activity was evaluated in oxygen-saturated 0.5 mol dm^?3 H₂SO₄ using Koutecky–Levich analysis. The BN-NSCC showed an eight to ten times higher ORR activity than undoped NSCC, with an increased number of electrons participating in the reaction. Tafel analysis revealed a change in the rate-determining step caused by BN-doping. Thus, the combination of a nanoshell structure and co-doping with boron and nitrogen was found to improve the ORR activity of carbon catalysts.     

Evaluation of standing‐sitting support system with passive rotational seat mechanism in standing motion

Since a decrease in muscle mass of elderly people, the physical burden of them in standing‐sitting motion of a seat are increasing than young people. For this problem, several standing‐sitting support systems have been developed, and evaluations of these systems focusing on a reduction of physical load have been discussed. However, these evaluations are of support systems with an active actuators or of support systems when they use a handrail and a standing aid. Thus, an evaluation of a support system with only passive actuators has not been reported. In this paper, in standing motion with using a standing‐sitting support system with passive rotational seat mechanism which our group proposes, we objectively evaluate an effectiveness of the passive rotational seat mechanism by statistical analysis.