Composites based on high-density polyethylene,polylactide and calcium carbonate: effect of calcium carbonate nanoparticles as co-compatibilizers

Polymer Bulletin - Investigating the compatibility mechanism of hybrid composites based on two polymers and one mineral nanofiller is a challenge that needs to be better understood. This study...     

Stress and strain distribution in demineralized enamel: A micro‐CT based finite element study

Physiological oral mechanical forces may play a role on the progression of enamel carious lesions to cavitation. Thus, the aim of this study was to describe, by 3D finite element analysis, stress, and strain patterns in sound and carious enamel after a simulated occlusal load. Micro‐CT based models were created and meshed with tetrahedral elements (based on an extracted third molar), namely: a sound (ST) and a carious tooth (CT). For the CT, enamel material properties were assigned according to the micro‐CT gray values. Below the threshold corresponding to the enamel lesion (2.5 g/cm³) lower and isotropic elastic modulus was assigned (E = 18 GPa against E₁ = 80 GPa, E₂ = E₃ = 20 GPa for sound enamel). Both models were imported into a FE solver where boundary conditions were assigned and a pressure load (500 MPa) was applied at the occlusal surface. A linear static analysis was performed, considering anisotropy in sound enamel. ST showed a more efficient transfer of maximum principal stress from enamel to the dentin layer, while for the CT, enamel layer was subjected to higher and concentrated loads. Maximum principal strain distributions were seen at the carious enamel surface, especially at the central fossa, correlating to the enamel cavity seen at the original micro‐CT model. It is possible to conclude that demineralized enamel compromises appropriate stress transfer from enamel to dentin, contributing to the odds of fracture and cavitation. Enamel fracture over a dentin lesion may happen as one of the normal pathways to caries progression and may act as a confounding factor during clinical diagnostic decisions. Microsc. Res. Tech. 78:865–872, 2015. © 2015 Wiley Periodicals, Inc.     

Gold Nitride: Preparation and Properties

We review the currently known methods of producing gold nitride and report on the influence of electrically isolated substrates on the growth of gold nitride films by reactive ion sputtering (RIS). It is found that isolation of the substrate decreases grain size and increases nitrogen content, the latter attributed to longer nitrogen ion lifetime on the surface of the growing film. The chemical reactivity of gold nitride is compared with that of pure gold films using the adsorption of 1-dodecyl mercaptan (CH₃(CH₂)₁₁SH) as a model system and it is found that there is no significant difference between gold films and gold nitride in terms of Au–S binding. However, gold nitride nanoparticles are suggested to be worthy of further investigation in terms of their catalytic properties.

Recyclable,Flexible, Low‐Power Oxide Electronics

The ability to process and dimensionally scale field‐effect transistors with and on paper and to integrate them as a core component for low‐power‐consumption analog and digital circuits is demonstrated. Low‐temperature‐processed p‐ and n‐channel integrated oxide thin‐film transistors in the complementary metal oxide semiconductor (CMOS) inverter architecture are seamlessly layered on mechanically flexible, low‐cost, recyclable paper substrates. The possibility of building these circuits using low‐temperature processes opens the door to new applications ranging from smart labels and sensors on clothing and packaging to electronic displays printed on paper pages for use in newspapers, magazines, books, signs, and advertising billboards. Because the CMOS circuits reported constitute fundamental building blocks for analog and digital electronics, this development creates the potential to have flexible form factor computers seamlessly layered onto paper. The holistic approach of merging low‐power circuitry with a recyclable substrate is an important step towards greener electronics.     

Electrical characterization of poly(amide-imide) for application in organic field effect devices

The admittance spectra and current–voltage (I–V) characteristics are reported of metal–insulator–metal (MIM) and metal–insulator–semiconductor (MIS) capacitors employing cross-linked poly(amide–imide) (c-PAI) as the insulator and poly(3-hexylthiophene) (P3HT) as the active semiconductor. The capacitance of the MIM devices are constant in the frequency range from 10 Hz to 100 kHz, with tan δ values as low as 7 × 10⁻³ over most of the range. Except at the lowest voltages, the I–V characteristics are well-described by the Schottky equation for thermal emission of electrons from the electrodes into the insulator. The admittance spectra of the MIS devices displayed a classic Maxwell–Wagner frequency response from which the transverse bulk hole mobility was estimated to be ∼2 × 10⁻⁵ cm² V⁻¹s⁻¹ or ∼5 × 10⁻⁸ cm² V⁻¹s⁻¹ depending on whether or not the surface of the insulator had been treated with hexamethyldisilazane (HMDS) prior to deposition of the P3HT. From the maximum loss observed in admittance-voltage plots, the interface trap density was estimated to be ∼5 × 10¹⁰ cm⁻² eV⁻¹ or ∼9 × 10¹⁰ cm⁻² eV⁻¹ again depending whether or not the insulator was treated with HMDS. We conclude, therefore, that HMDS plays a useful role in promoting order in the P3HT film as well as reducing the density of interface trap states. Although interposing the P3HT layer between the insulator and the gold electrode degrades the insulating properties of the c-PAI, nevertheless, they remain sufficiently good for use in organic electronic devices.     

Physical examination of arteriovenous fistula: The influence of professional experience in the detection of complications

Vascular access is one of the leading causes of mobilization of financial resources in health systems for people with chronic kidney disease on hemodialysis. Physical examination of the arteriovenous fistula (AVF) has demonstrated its effectiveness in identifying complications. We decided to evaluate the influence of nurses' professional experience in the detection of complications of the AVF (venous stenosis and steal syndrome). The study took place in eight hemodialysis centers between May and September of 2011 in the north of Portugal. Sample was constituted by registered nurses. The nurses involved in the experiment were divided in two groups: those who had more than 5 years of experience and those who had less than 5 years of experience. Ninety‐two nurses participated in the study: 34 nurses had less than 5 years of professional experience and 58 had more than 5 years of professional experience. In the practices considered by nurses in the detection of venous stenosis, there were no differences observed between the groups (P > 0.05). In steal syndrome, there were no differences observed between the groups in the practices of the nurses in the detection of this complication of the AVF (P > 0.05). We concluded that professional experience does not influence the detection of venous stenosis and steal syndrome.     

Crystallization of porcine insulin with carbon dioxide as acidifying agent

Recent studies on the use of volatile electrolytes such as CO₂ in protein precipitation showed that these agents are a promising alternative to the conventional acids. This use of volatile electrolytes prevents protein denaturation due to local pH extremes, and saline effluent generation is greatly reduced, as the volatile electrolyte may be separated and recovered from solution just by pressure release. In this work, insulin was successfully crystallized in the presence of zinc using CO₂ as acidifying agent. The crystals obtained were rhombohedral, a common shape for porcine insulin crystals that contain zinc in their structure, and their average size varied with the mixing applied.     

Acerola and cashew apple as sources of antioxidants and dietary fibre

Several tropical fruits have been described as natural sources of dietary fibre (DF) and phenolic compounds, associated with different health effects. The aim of this work was to ascertain the DF, phenolic compounds content (including non‐extractable polyphenols, mostly associated with DF) and antioxidant capacity in acerola fruits and cashew apples from selected clones. ‘BRS 236’ acerola fruits presented a high antioxidant capacity because of the combination of both extractable polyphenols and l ‐ascorbic acid (providing together a Folin value of 170 kg^?1 g d.m.). ‘CCP 76’ cashew apples contained 28 g kg^?1 d.m. of extractable polyphenols and 13 g kg^?1 d.m. of ascorbic acid as well as a high amount of non‐extractable condensed tannins (52 g kg^?1 d.m.). DF content was of 260 g kg^?1 d.m. in acerola fruit and of 209 g kg^?1 d.m. in cashew apple. Acerola fruits and cashew apple should therefore be considered as new natural sources of DF and phenolic compounds.     

Experimental procedure for kinetic studies on egg-shell catalysts: The case of liquid-phase hydrogenation of 1,3-butadiene and n-butenes on commercial Pd catalysts

A study of the liquid-phase hydrogenation of 1,3-butadiene on commercial Pd/Al₂O₃ catalysts of the “egg-shell” type has been performed. Experimental conditions (40°C, 4 atm and high conversion of the di-olefin) were selected in accordance to industrial operating conditions employed for selective hydrogenation of 1,3-butadiene. Three experimental schemes were tested: a slurry reactor, a rotating-basket reactor, and a recirculation system with an external fixed-bed reactor. Significant drawbacks shown by the two former devices were mainly derived from the very high activity and the egg-shell structure of the catalysts. Instead, the recirculation system was found to be an excellent alternative.

Although Pd is present only within a very thin external layer (around 50–250 μm), strong diffusion effects impairing selectivity were observed. Plausible kinetic expressions corresponding to nine series–parallel overall reactions are derived from a mechanistic model. To deal with this network of fast reactions, a rather complex set of computational and predictive tools were employed. A worked out example from several replicates demonstrates the capability of both, experimental and data analysis procedures, for inferring kinetic parameters of the proposed model.     

Comparison of the damage in sapphire due to implantation of boron, nitrogen, and iron

The damage microstructure and optical properties of sapphire implanted with boron, nitrogen and iron were examined by RBS-C, TEM, and optical absorption. Implantations were conducted at RT and 1000 °C at 150 keV and fluences of 3 × 10¹⁶-1 × 10¹⁷ ions/cm². Optical absorption measurements indicate that the boron-implanted samples contained the highest number of F-type centers and the nitrogen-implanted samples the fewest. The microstructure of the boron-implanted samples shows only ‘black-spot’ defect clusters, as did the iron-implanted samples at the lower fluences. At higher fluences, the iron implanted samples revealed the presence of nanometer-sized precipitates of single crystal bcc iron that contributed to additional optical scattering. Bubbles formed in samples implanted with low fluences of nitrogen. A second damage region is apparent in the RBS-C patterns for higher fluences of nitrogen.