Korrosion von ölgefeuerten Zentralheizungskesseln

Corrosion of oil-fired domestic boilers Depending on the surface temperature of the flue gas side the corrosion of oil fired domestic boilers proceeds either mainly by acid corrosion or by oxygen corrosion:

• – At surface temperatures of 60°C and higher the corrosion mechanism of acid corrosion prevails and the corrosion rates amount to 0.1–0.3 mm/year (values referred to continuous burner operation). The corrosion products consist of soluble iron(II)- and iron(III)sulfates. Higher corrosion rates can be attributed to an appreciable catalytic formation of sulfur trioxide on the corrosion products formed on the convective heating surfaces.
• – At surface temperatures of 40°C the mechanism of oxygen corrosion already dominates and the corrosion rates are about ten times higher (1.5–3 mm/year, referred to continous burner operation). The high portion of ioron oxide hydrates, especially goethit (α-FeOOH), makes the corrosion products difficult to remove.
• – Distinctly reduced service lives are also expected for the so called reduced temperature boilers (“Niedertemperaturkessel”) and low temperature boiers (“Tieftemperaturkessel”): According to the manufacturers these boilers may be operated at boiler water temperatures well below 60°C, as they are equipped with constructive measures to enhance the surface temperature on the flue gas side. However, these measures are only fully effective under stationary conditions.

Some of the results were obtained from weight loss measurements on test specimen made from St 35.8 and gray cast iron, that were exposed to the flue gases of an oil fired experimental boiler. Other important results come from field measurements of the sulfuric acid content of about 30 boilers that are in practical use.     

A prototype scanning stylus profilometer for rapid measurement of small surface areas

A novel stylus based profiling instrument has been developed for rapid measurement of small surface areas. Outlined in the following paper are some of the key features of the prototype system including the wideband stylus pick-up and the dedicated scanning traverse mechanism. In addition, some preliminary results obtained by scanning the instrument over several different surfaces are presented.     

Exploring the use of information visualization for digital libraries

This paper presents the findings from a study conducted to explore the current and future use of information visualization (IV) for digital libraries (DL). A series of query techniques and participatory design workshops were employed with the goal of actively involving users in identifying the key characteristics and applications of IV for DLs. The methodology employed, key findings and overall conclusions are presented and discussed.     

SEMPA – Ein Ansatz des Semantischen Prozessmanagements zur Planung von Prozessmodellen

Currently process modeling is mostly done manually. Therefore, the initial design of process models as well as changes to process models which are frequently necessary to react to new market developments or new regulations are time-consuming tasks. In this paper we introduce SEMPA, an approach for the partly automatic planning of process models. Using ontologies to semantically describe actions – as envisioned in Semantic Business Process Management –, a process model for a specified problem setting can be created automatically. In comparison to existing planning algorithms our approach creates process models including control structures and is able to cope with complex and numerical input and output parameters of actions. The prototypical implementation as well as an example taken from the financial services domain illustrate the practical benefit of our approach.     

Zur personellen Verankerung der IT-Funktion im Vorstand börsennotierter Unternehmen: Ergebnisse einer inhaltsanalytischen Betrachtung

On the Rate of Board Members with IT Responsibilities in Firms Listed on the Stock Exchange: Results of a Content Analysis: This article reports on a content analysis that investigates the rate of board members with IT responsibilities in firms listed on the stock exchange in the German speaking countries. Furthermore, the study ascertains the correlation of six factors – which become evident through content analysis – with the rate of board members with IT responsibilities. A total of 679 annual reports of German, Austrian, and Swiss corporations have been analyzed. The results show that in Germany and Switzerland 26 percent of the firms investigated have a board member with IT responsibilities, in Austria the rate is 23 percent. Additionally, the results show that turnover and number of employees are highly positively correlated with the rate of board members with IT responsibilities. Furthermore, the data show a correlation between industry and the rate of board members with IT responsibilities.     

Entwicklung Serviceorientierter Architekturen zur Integration von Produktion und Dienstleistung – Eine Konzeptionsmethode und ihre Anwendung am Beispiel des Recyclings elektronischer Geräte

Offering product-service bundles (consisting of products and services) is becoming more important for companies. Modifying the organizational structure of the cooperation as well as adapting to changing customer demands requires versatile information systems. Implementing Service Oriented Architectures (SOA) is one attempt to provide this flexibility. Currently, there is little methodical guidance for the identification, specification and implementation of services as building blocks of Service Oriented Architectures. Accounting for this need, a conceptual approach is designed, which adapts approaches of customer integration, and combines a business and IT analysis. The applicability of the method is demonstrated by designing a Service Oriented Architecture for the recycling of electronic equipment. Implementing services for other product-service bundles will support additional integration scenarios. By standardizing services, a sound integration of products and services can be backed by providing a reference architecture.     

Directed model checking with distance-preserving abstractions

In directed model checking, the traversal of the state space is guided by an estimate of the distance from the current state to the nearest error state. This paper presents a distance-preserving abstraction for concurrent systems that allows one to compute an interesting estimate of the error distance without hitting the state explosion problem. Our experiments show a dramatic reduction both in the number of states explored by the model checker and in the total runtime.     

On finite dynamic equations for fluid-saturated porous media

Summary The paper concerns the relations between two principally different approaches to the formulation of momentum balance equations in porous media theories, namely, the dynamic approach similar to Biot's theory and the modern approach as a result of mixture theories extended by the concept of volume fractions. In particular, it is shown that both approaches necessarily lead to the same type of momentum balance equations and furthermore contain, in a certain sense, within the geometrically linear case, the well-known classical equations of Biot's theory.     

Verified inclusion for eigenvalues of the first order PLL equation with general phase detector characteristics

We present a method depending on matrix continued fractions and Sturm's comparison theorem to obtain verified inclusions for eigenvalues of the underlying boundary value problem of the first-order phase locked loop equation $pu'' + (\lambda + \tilde g)u = 0$ ,p = 1/SNR with general phase detector characteristic $\tilde g(\phi )$ .     

Electromagnetic field diffusion, θ-functions,and image solutions

Contents We discuss some initial and boundary value problems of one-dimensional electromagnetic field diffusion. The solutions can be given by infinite series in two essentially different (however equivalent) forms, one being the usual Fourier-expansion and the other one being an infinite series of Gaussian exponentials or related functions (as for instance error-functions). The second form can be obtained by using infinitely many images to fulfill initial and boundary conditions. Finally the mathematical relations between the two equivalent types of solutions are discussed in terms of -functions and their transformation properties. The existence of the solutions in these two different forms is very interesting from a numerical point of view also.

---

Die Diffusion elektromagnetischer Felder, -Funktionen und Spiegelungsmethoden

Übersicht Es werden einige Anfangs- und Randwertprobleme eindimensionaler elektromagnetischer Felddiffusion erörtert. Die Lösungen können in zwei wesentlich verschiedenen (jedoch gleichwertigen) Formen angegeben werden, erstens in Form üblicher Fourier-Reihen und zweitens in Form unendlicher Reihen von Gaußschen Exponentialfunktionen oder damit verwandter Funktionen (z.B. Fehlerfunktionen). Diese zweite Form der Lösungen läßt sich durch die Anwendung unendlich oft wiederholter Spiegelung zur Erfüllung der Rand- und Anfangsbedingung anschaulich interpretieren. Abschließend werden die beiden Lösungstypen mit Hilfe von -Funktionen und deren Transformationseigenschaften erläutert. Die Verfügbarkeit der Lösungen in beiden Formen ist auch numerisch sehr interessant.